Species distribution models (SDMs) are tools that combine species observations of occurrence, abundance, or biomass with environmental variables to predict the distribution of a species in unsampled locations. To produce accurate predictions of occurrence, abundance or biomass distribution, a wide range of physical and/or biological variables is desirable. Such data is often collected over limited or irregular spatial scales, and require the application of geospatial techniques to produce continuous environmental surfaces that can be used for modelling at all spatial scales. Here we provide a review of 102 environmental data layers that were compiled for the entire spatial extent of Fisheries and Oceans Canada’s (DFO) Maritimes Region. Variables were obtained from a broad range of physical and biological data sources and spatially interpolated using geostatistical methods. For each variable we document the underlying data distribution, provide relevant diagnostics of the interpolation models and an assessment of model performance, and present the final standard error and interpolation surfaces. These layers have been archived in a common (raster) format at the Bedford Institute of Oceanography to facilitate future use. Based on the diagnostic summaries in this report, a subset of these variables has subsequently been used in species distribution models to predict the distribution of deep-water corals, sponges, and other significant benthic taxa in the Maritimes Region.Cite this data as: Beazley, Lindsay; Guijarro, Javier, Lirette; Camille; Wang, Zeliang; Kenchington, Ellen (2020). Characteristics of Environmental Data Layers for Use in Species Distribution Modelling in the Maritimes Region. Published July 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/34a917cb-a0e3-403c-91c7-af3dc20628b1

ENV - Environment and conservation (environment)Environmental resources, protection, and conservation. For example, resources describing pollution, waste storage and treatment, environmental impact assessment, environmental risk, and nature reserves. )

Environmental Monitoring Stations (EMS) spatial points coverage for the Province by LOCATION TYPES. The following spatial layers reference this as a data source: 1. Environmental Monitoring - All Stations 2. Environmental Monitoring Stations - Air Monitoring (Ambient Air Site) 3. Environmental Monitoring Stations - Air Monitoring (Air Permit) 4. Environmental Monitoring Stations - Water Sites (Water Monitoring) 5. Environmental Monitoring Stations - Water Sites (Water Permits) 6. Environmental Monitoring Stations - Water Sites (Well) 7. Environmental Monitoring Stations - Water Sites (Observation Well) 8. Environmental Monitoring Stations - Water Sites (Spring)

DescriptionConservation of marine biodiversity requires understanding the joint influence of ongoing environmental change and fishing pressure. Addressing this challenge requires robust biodiversity monitoring and analyses that jointly account for potential drivers of change. Here, we ask how demersal fish biodiversity in Canadian Pacific waters has changed since 2003 and assess the degree to which these changes can be explained by environmental change and commercial fishing. Using a spatiotemporal multispecies model based on fisheries independent data, we find that species density (number of species per area) and community biomass have increased during this period. Environmental changes during this period were associated with temporal fluctuations in the biomass of species and the community as a whole. However, environmental changes were less associated with changes in species’ occurrence. Thus, the estimated increases in species density are not likely to be due to environmental change. Instead, our results are consistent with an ongoing recovery of the demersal fish community from a reduction in commercial fishing intensity from historical levels. These findings provide key insight into the drivers of biodiversity change that can inform ecosystem-based management.The layers provided represent three community metrics: 1) species density (i.e., species richness), 2) Hill-Shannon diversity, and 3) community biomass. All layers are provided at a 3 km resolution across the study domain for the period of 2003 to 2019. For each metric, we provide layers for three summary statistics: 1) the mean value in each grid cell over the temporal range, 2) the probability that the grid cell is a hotspot for that metric, and 3) the temporal coefficient of variation (i.e., standard deviation/mean) across all years.Methods:The analysis that produced these layers is presented in Thompson et al. (2022). The analysis uses data from the Groundfish Synoptic Bottom Trawl Research surveys in Queen Charlotte Sound (QCS), Hecate Strait (HS), West Coast Vancouver Island (WCVI), and West Coast Haida Gwaii (WCHG) from 2003 to 2019. Cartilaginous and bony fish species caught in DFO groundfish surveys that were present in at least 15% of all trawls over the depth range in which they were caught were included. This depth range was defined as that which included 95% of all trawls in which that species was present. The final dataset used in our analysis consisted of 57 species (Table S1 in Thompson et al. 2022).The spatiotemporal dynamics of the demersal fish community were modeled using the Hierarchical Modeling of Species Communities (HMSC) framework and package (Tikhonov et al. 2021) in R. This framework uses Bayesian inference to fit a multivariate hierarchical generalized mixed model. We modeled community dynamics using a hurdle model, which consists of two sub models: a presence-absence model and a biomass model that is conditional on presence. Our list of environmental covariates included bottom depth, bathymetric position index (BPI), mean summer tidal speed, substrate muddiness, substrate rockiness, whether the trawl was inside or outside of the ecosystem-based trawling footprint, and survey region (QCS & HS vs. WCVI & WCHG)), mean summer near-bottom temperature deviation, mean summer near-bottom dissolved oxygen deviation, mean summer cross-shore and along-shore current velocities near the seafloor, mean summer depth-integrated primary production, and local-scale commercial fishing effort.Layers are provided for three community metrics. All metrics should be interpreted as the value that would be expected in the catch from an average tow in the Groundfish Synoptic Bottom Trawl Research Surveys taken in a given 3 km grid cell. Species density (sometimes called species richness) should be interpreted as the number of the 57 species that would be caught in a trawl. Hill-Shannon diversity is a measure of diversity that gives greater weight to communities where biomass is spread equally across species. Community biomass is the total biomass across all 57 species that would be expected to be caught per square km in an average tow. Data Sources:Research data was provided by Pacific Science's Groundfish Data Unit for research surveys from the GFBio database between 2003 and 2019 that occurred in four regions: Queen Charlotte Sound, Hecate Strait, West Coast Haida Gwaii, and West Coast Vancouver Island. Our analysis excludes species that are rarely caught in the research trawls and so our estimates would not include the occurrence or biomass of these rare species.Commercial fishing data was accessed through a DFO R script detailed here: https://github.com/pbsassess/gfdata. Local scale commercial fishing effort was calculated from this data. The substrate layers were obtained from a substrate model (Gregr et al. 2021). The oceanographic layers (bottom temperature, dissolved oxygen, tidal and circulation speeds, primary production) were obtained from a hindcast simulation of the British Columbia continental margin (BCCM) model (Peña et al. 2019).Uncertainties:Species that are not well sampled by the trawl surveys may not be accurately estimated by our model. The model did not include spatiotemporal random effects, which likely underestimates spatiotemporal variability in the region. It is also important to underline covariate uncertainty and model uncertainty. The hotspot estimates provide one measure of model uncertainty/certainty.

Environmental Monitoring Program data for aquaculture.

Area Based Management Plans (ABMP) are designated areas for the purposes of environmental protection. It must consider the impact of point and non-point source of waste, cumulative impact of the wastes, environmental management objectives and outcomes for the designated area, and ongoing monitoring and reporting.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide, and volatile organic compounds at the national, regional and urban levels and at local monitoring stations. The national and regional indicators are presented with their corresponding Canadian Ambient Air Quality Standard when available. Canadians are exposed to air pollutants on a daily basis, and this exposure can cause adverse health and environmental effects. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide and volatile organic compounds at the national, regional and urban area levels and at local monitoring stations. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Water quantity in Canadian rivers indicator provides the annual water quantity status by monitoring station in 2021. The indicator provides information about the state of the amount of surface water in Canada and its change through time to support water resource management. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide, and volatile organic compounds at the national, regional and urban levels and at local monitoring stations. The national and regional indicators are presented with their corresponding Canadian Ambient Air Quality Standard when available. Canadians are exposed to air pollutants on a daily basis, and this exposure can cause adverse health and environmental effects. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators