The spatial representation for Environment Regions. An Environment Region is an administrative area established by the Ministry and is an administrative area which is used to manage regional activites.

Environmental Monitoring Stations (EMS) spatial points coverage for the Province by LOCATION TYPES. The following spatial layers reference this as a data source: 1. Environmental Monitoring - All Stations 2. Environmental Monitoring Stations - Air Monitoring (Ambient Air Site) 3. Environmental Monitoring Stations - Air Monitoring (Air Permit) 4. Environmental Monitoring Stations - Water Sites (Water Monitoring) 5. Environmental Monitoring Stations - Water Sites (Water Permits) 6. Environmental Monitoring Stations - Water Sites (Well) 7. Environmental Monitoring Stations - Water Sites (Observation Well) 8. Environmental Monitoring Stations - Water Sites (Spring)

Environmental monitoring stations (EMS) points coverage for the Province by MONITORING LOCATION GROUPS.

The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

Yukon Environmental and Socio-economic Assessment Act (YESAA) Assessment District boundaries. This data set was created at a scale of 1:250,000 from metes and bounds provided in the "MINISTERIAL ORDER ESTABLISHING ASSESSMENT DISTRICT BOUNDARIES PURSUANT TO SECTION 20(1) OF THE YUKON ENVIRONMENTAL AND SOCIO-ECONOMIC ASSESSMENT ACT".Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The objective of the Independent Environmental Monitoring Program (IEMP) is to build Indigenous and public trust in the Canadian Nuclear Safety Commission's (CNSC) regulation of the nuclear industry, via an independent, technical and accessible environmental sampling program around nuclear facilities, while using CNSC resources effectively and efficiently. For more information: www.Nuclearsafety.gc.ca/IEMP

The dataset contains projects that are currently, or have been, subject to environmental assessment review. Attributes include the project description, project phase, decision, and proponent name. This layer consists of points themed two ways: a. Project Phase- This theme consists of layers showing what phase each project is in - pre-EA, application review, post-decision, and withdrawn or terminated; and b. Project Type - This theme consists of nine layers that reflect the potential types of projects under review. This dataset is coming from the EAO Project Information Centre (EPIC) and is updated daily. For more information on any of the project points go to https://projects.eao.gov.bc.ca/.

The Canadian Nuclear Safety Commission (CNSC) and Environment and Climate Change Canada (ECCC) are publishing databases with effluent and environmental monitoring results from nuclear facilities located along the Ottawa River watershed as part of the Regional Information and Monitoring Network (RIMNet) for the Ottawa River Watershed Basin initiative. The facilities included are Chalk River Laboratories, Nordion Canada Inc., SRB Technologies Canada Inc., and Nuclear Power Demonstration Waste Facility. The initiative was developed to address questions and concerns expressed by members of the public and Indigenous Nations and communities about the availability of publicly accessible environmental monitoring data in the Ottawa River Watershed Basin. More information about the initiative is available here: https://www.cnsc-ccsn.gc.ca/eng/resources/environmental-protection/rimnet/ This dataset contains effluent and environmental monitoring results from Chalk River Laboratories, Nordion Canada Inc., SRB Technologies Canada Inc., and Nuclear Power Demonstration Waste Facility. All of the effluent and emissions releases to the environment in this dataset are below the CNSC licensed release limits. All of the environmental monitoring results in this dataset are below environmental quality guidelines. More information about CNSC staff’s assessment of these facilities are found in CNSC staff’s regulatory oversight reports: https://www.cnsc-ccsn.gc.ca/eng/resources/publications/reports/regulatory-oversight-reports/

The Coastal Infrastructure Vulnerability Index (CIVI) was jointly developed by DFO Science Branch, Small Craft Harbours (SCH) Program and the Economic Analysis and Statistics Directorate. The CIVI was designed with the intent of developing a climate change adaptation tool that would support management decisions regarding the long-term infrastructure planning for SCH sites.The CIVI provides a numerical indication of the relative vulnerability of small craft harbour sites to the effects of climate change and was designed with three component sub-indices: Environmental Exposure (natural forces), Infrastructure, and Socio-economic. The spatial component for the coastline was derived from the CanVec 1:50,000 hydrographic layer (https://open.canada.ca/data/en/dataset/9d96e8c9-22fe-4ad2-b5e8-94a6991b744b).This layer combines the 1:50,000 CanVec coastline of Canada with the following CIVI environmental exposure variables:- projected sea level rise (for the decades 2030, 2040,...2100) in meters- wave height (metres) and wind speed (metres/second)- change in sea ice coverage in Atlantic Canada from the 1970s to the 2000sSea level change:Data for relative sea level change (SLC) were derived from the Intergovernmental Panel on Climate Change Fifth Assessment Report (IPCC 2014, AR5). The projected relative sea level change under the high emission scenario (RCP8.5) was calculated for all years between 2006 and 2100. Sea level change for the years 2030, 2040, 2050, 2060, 2070, 2080, 2090, and 2100 were used.Wind Speed and Wave HeightModelled hindcasts of yearly maximum wind speed (1990 - 2012) and wave height (1990- 2014) were used. This dataset was generated from IFREMER wave hindcasts using the WAVEWATCH III model with wind data from NCEP Climate Forecast System Reanalysis (CFSR) (Saha et al. 2010). Two high resolution (10 minute) grids of Atlantic and Pacific maximum modeled wind speeds and maximum significant wave height were used for southern Canadian coastal areas while a coarser (30 minute) worldwide grid was used for the Arctic areas. From these datasets the mean annual maximum wind speed over 23 years and the mean maximum significant wave height over 25 years were calculated.Change in sea ice coverage:Sea ice data from the Canadian Ice Service were acquired for Atlantic and Arctic Canada, representing percent ice coverage for each week over four decades (1970s, 1980s, 1990, 2000s). For each decade a single dataset was calculated to represent the sum of all weeks with ice coverage in excess of 50%, with a maximum possible score of 52 weeks for each decade. To measure change in ice duration, the summary mapsheet from the 2000s was subtracted from the 1970s summary mapsheet. The final dataset represents the change between the 1970s and 2000s in the number of weeks with ice concentrations greater than 50%. A positive number indicates a reduction in weeks of ice coverage, a negative number an increase in ice coverage.The data for individual small craft harbours included here contains predicted sea level change for the decades between 2030 and 2100, wave height, windspeed, change in sea ice coverage, population, and the final environmental exposure sub-index value (ESI). The population for each harbour is derived from the 2016 Census of Canada data for the Census subdivision (CSD) geographic unit.Reference:Relative sea-level projections for Canada based on the IPCC Fifth Assessment Report and the NAD83v70VG national crustal velocity modelhttps://doi.org/10.4095/327878 IPCC, 2014. Climate Change 2014: Impacts, Adaptation, and Vulnerability. Part A: Global and Sectoral Aspects. Contribution of Working Group II to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change [Field, C.B., V.R. Barros, D.J. Dokken, K.J. Mach, M.D. Mastrandrea, T.E. Bilir, M. Chatterjee, K.L. Ebi, Y.O. Estrada, R.C. Genova, B. Girma, E.S. Kissel, A.N. Levy, S. MacCracken, P.R. Mastrandrea, and L.L. White (eds.)]. Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA, 1132 pp.Cite this data as: Greenan B. and Greyson P. Coastal Environmental Exposure Layer. Published March 2022. Ocean Ecosystem Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.

Area Based Management Plans (ABMP) are designated areas for the purposes of environmental protection. It must consider the impact of point and non-point source of waste, cumulative impact of the wastes, environmental management objectives and outcomes for the designated area, and ongoing monitoring and reporting.