PURPOSE:To provide demographic parameters and relative indices of abundance for Atlantic herring in NAFO Division 4T.DESCRIPTION:The experimental gillnet survey is conducted in collaboration with Atlantic herring harvesters and uses standardized multi-mesh gillnets. Gillnets are set on spawning grounds in the spring and fall. Data (fish and sample) are collected to provide: (1) relative age-disaggregated indices of abundance, (2) an indicator of relative changes in fishery selectivity over time, and (3) information on the demographic composition of herring on the spawning grounds. PARAMETERS COLLECTED:Sample: sample location; sample weight; mesh size; length frequencyBiological: length; weight; gonad weight; maturity stage (biological); sex (biological); ring count (biological)USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

This project was completed by the Pelagics Section in the Newfoundland and Labrador Science Branch of Fisheries and Oceans Canada (DFO). As part of the Coastal Environmental Baseline Program, a historical research gillnet program was reinitiated in Placentia Bay. Four local fishers each set fleets of standardized nets to catch herring for 6 weeks during the spring. The data collected was used to update a time series and provide advice at the herring stock assessment in October 2022.  This program was continued in the 22/23 fiscal year. Data collected from this program included gillnet catch rates, bycatch, temperature and biological (herring) samples; from which biological metrics such as length, weight, sex, maturity and age were measured. This record contains catch data for 2018 to 2021, as well as biological data from 2018.

These datasets show commercial fisheries catch weight landings of directed fisheries and bycatch from the Scotian Shelf, the Bay of Fundy, and Georges Bank from NAFO Divisions 4VWX and the Canadian portions of 5Y and 5Z. Atlantic Canadian inter-regional maps of four species (Atlantic Halibut, Bluefin Tuna, Redfish and Scallop) are also included from NAFO Divisions 4RST, 3KLMNOP, and 2GHJ. Five-year composite maps (2014–2018) that aggregate catches for each map series are publicly available. The maps aggregate catch weight (kg) per 10 km2 hexagon grid cell for selected species, species groupings and gear types to identify important fishing areas. These maps may be used for decision making in coastal and oceans management, including marine spatial planning, environmental emergency response operations and protocols, Marine Stewardship Council certification processes, marine protected area networks, and ecological risk assessment.These datasets have been filtered to comply with the Government of Canada's privacy policy. Privacy assessments were conducted to identify NAFO unit areas containing data with less than five vessel IDs, licence IDs or fisher IDs. If this threshold was not met, catch weight locations were withheld from these unit areas to protect the identity or activity of individual vessels or companies.Maps were created for the following species, species groupings and gear types:1. Groundfish (all species)2. Groundfish Bottom Trawl3. Groundfish Gillnet4. Groundfish Bottom Longline5. Groundfish (quarterly composites Q1, Q2, Q3, Q4)6. Atlantic Cod7. Atlantic Cod, Haddock and Pollock8. Flatfish9. Atlantic Halibut10. Greenland Halibut (Turbot)11. Hagfish12. Cusk13. Dogfish14. Redfish15. Red Hake16. Silver Hake17. White Hake18. Monkfish19. Sculpin20. Skate21. Wolffish22. Squid23. Herring24. Mackerel25. Large Pelagics26. Bluefin Tuna27. Other Tuna28. Swordfish29. Porbeagle, Mako and Blue Shark30. Snow Crab31. Other Crab32. Scallop33. Scallop (quarterly composites Q1, Q2, Q3, Q4)34. Offshore Clam35. Shrimp36. Offshore Lobster37. Disputed Zone Area 38B Lobster38. Whelk

DFO’s Oceans and Coastal Management Division (OCMD) in the Maritimes Region has updated its fisheries landings maps for 2010–2014. These maps will be used for decision making in coastal and oceans management, including mitigating human use conflicts, informing environmental emergency response operations and protocols, informing Marine Stewardship Council certification processes, planning marine protected area networks, assessing ecological risks, and monitoring compliance and threats in coral and sponge closures and Marine Protected Areas. Fisheries maps were created to identify important fishing areas using aggregate landed weight (kg) per 2 x 2-minute grid cell for selected species/gear types.This dataset has been filtered to comply with the Government of Canada's privacy policy. Privacy assessments were conducted to identify NAFO unit areas containing data with less than five vessel IDs, license IDs and fisher IDs. If this threshold was not met, catch weight locations were withheld from these unit areas to protect the identity or activity of individual vessels or companies.Maps were created for the following species/gear types: 1. Atlantic Halibut2. Bluefin Tuna3. Bottom Longline Groundfish4. Bottom Trawl Groundfish5. Cod6. Cod, Haddock, Pollock7. Cusk8. Dogfish9. Flatfish10. Gillnet Groundfish11. Greenland Halibut12. Groundfish 13. Groundfish (quarterly composites Q1, Q2, Q3, Q4)14. Hagfish15. Herring16. Large Pelagics17. Mackerel18. Monkfish19. Offshore Clam20. Offshore Lobster21. Grey Zone Lobster22. Other Crab23. Other Tuna24. Pollock25. Porbeagle, Mako and Blue Shark26. Red Hake27. Redfish28. Scallop29. Scallop (quarterly composites Q1, Q2, Q3, Q4)30. Sculpin31. Sea Urchin32. Shrimp33. Silver Hake34. Skate35. Snow Crab36. Squid37. Swordfish38. White Hake39. Wolffish

This resource documents a dataset of epifauna occurrences collected in 2021 during The Knowledge and Ecosystem-Based Approach in Baffin Bay (KEBABB) program developed by the Department of Fisheries and Oceans Canada (DFO) in collaboration with university partners. The overall objective of KEBABB is to characterize the variability and trends in physical, chemical, and biological oceanographic conditions and food webs supporting fisheries in the connected ecosystems of western Baffin Bay and Lancaster Sound. In 2021, DFO expanded the KEBABB program to Barrow Strait (KEBABS-Knowledge and Ecosystem-Based Approach in Barrow Strait), a key productive area of the Tallurutiup Imanga National Marine Conservation Area. The study took place in the Eastern Canadian Arctic (mainly in Baffin Bay, Davis Strait and Barrow Strait). Sampling is done along transects at fixed stations in the study area. Catches are collected with a 1.5 m Agassiz trawl (5 mm mesh net) for 3 minutes bottom-contact time at a target speed of 1.5 knots and with a 3 m benthic beam trawl (6.4 mm mesh net) for 15 minutes bottom-contact time at a target speed of 3 knots. A total of 16 stations were sampled for epifauna in 2021 between 85-850 m depth. Epibenthic invertebrates are identified to the lowest possible taxonomic level and photographed. All unknown specimens are frozen. In the lab, the identifications are validated or refined with the photos and the frozen specimens.The data are presented in Darwin Core and are separated in two files:The “Activité_épifaune_KEBABB_epifauna_event_en” file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The “Occurrence_épifaune_KEBABB_epifauna_en” file that contains the taxonomic occurrences.Further details on sampling can be found in the following report: Pućko, M., Charette, J., Tremblay P., Brulotte S., St-Denis B., Ciastek S., Hedges, K., Kuzyk, Z., Roy V., and Michel, C. 2022. An ecosystem-based approach in the eastern Arctic: KEBABB/S (Knowledge and Ecosystem-Based Approach in Baffin Bay/Barrow Strait) 2021 expedition report. Can. Manuscr. Rep. Fish. Aquat. Sci. 3250: viii + 58 p. https://publications.gc.ca/collections/collection_2022/mpo-dfo/Fs97-4-3250-eng.pdfUSE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

PURPOSE:To characterize food webs of freshwater fish communities using stable isotopes DESCRIPTION:Data set containing the carbon, nitrogen, and sulphur stable isotope ratios of fishes caught in the Northwest Miramichi River system PARAMETERS COLLECTED:Species gut contents (ecological); species isotopic signatures (ecological); points (spatial)PHYSICAL SAMPLE DETAILS:Powdered animal tissueSAMPLING METHODS:Invertebrates were sampled via kicknet and were collected 1-4 meters from the shore of each location in one-minute intervals with 5-10 intervals per site. Fish were captured using a variety of net types in order to maximize sampling breadth. Please see below for list of net types and mesh sizes: Large fyke (box, lead line, and cod = 5mm tight, 10mm loose); 6mm beach seine; Site 3: two small fyke nets (box, lead line, and cod = 17mm, 17mm and 10mm tight, and 32mm, 32mm, 20mm loose), one trap net (box = 47.6mm and lead line = 146mm) were used).USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

These datasets show commercial fisheries catch weight landings of directed fisheries and bycatch from the Scotian Shelf, the Bay of Fundy, and Georges Bank from NAFO Divisions 4VWX and the Canadian portions of 5Y and 5Z. Five-year composite maps (2019–2023) that aggregate catches for each map series are publicly available. The maps aggregate catch weight (kg) per 10 km2 hexagon grid cell for selected species, species groupings and gear types to identify important fishing areas. These maps can support decision making in coastal and oceans management, including marine spatial planning, environmental emergency response operations and protocols, Marine Stewardship Council certification processes, marine protected area networks, and ecological risk assessment.Reported catch locations may have rounded coordinates or contain errors. Although some errors have been corrected, it is assumed that additional errors remain in the data. These datasets have been filtered to comply with the Government of Canada's privacy policy. Privacy assessments were conducted to identify DFO unit areas containing data with less than five vessel IDs, licence IDs or fisher IDs. If this threshold was not met, catch weight locations were withheld from these unit areas to protect the identity or activity of individual vessels or companies.Maps were created for the following species, species groupings and gear types:1. Groundfish (all species)2. Groundfish Bottom Trawl3. Groundfish Bottom Longline4. Groundfish Gillnet5. Groundfish (seasonal composites)6. Atlantic Cod7. Atlantic Cod, Haddock and Pollock8. Flatfish9. Atlantic Halibut10. Greenland Halibut (Turbot)11. Hagfish12. Cusk13. Dogfish14. Redfish15. Red Hake16. Silver Hake17. White Hake18. Monkfish19. Sculpin20. Skate21. Wolffish22. Squid23. Herring24. Mackerel25. Herring and Mackerel Gillnet26. Purse Seine27. Large Pelagics28. Bluefin Tuna29. Other Tuna30. Swordfish31. Snow Crab32. Other Crab33. Scallop34. Scallop (seasonal composites)35. Offshore Clam36. Shrimp Trawl37. Shrimp Trap38. Offshore Lobster39. Disputed Zone Area 38B Lobster40. Whelk

This file represents an aggregated dataset that shows previously active Orders and Alerts in the Province as initiated by Local Governments or First Nations. Start dates, re-installment dates and All Clear Dates for each Evacuation Order and Alert are included in this multipart polygon dataset. The dataset includes records beginning summer 2017 until the present day. Orders and Alerts that are currently active are found in [Evacuation Orders and Alerts](https://catalogue.data.gov.bc.ca/dataset/evacuation-orders-and-alerts).

This dataset is a locational record of the meteorological input files publically available on Saskatchewan GeoHub that can be used with the Environmental Protection Agency approved Regulatory Model (AERMOD). Each file represents the meteorology over an area of the province while minimizing the influences of local terrain on air flow. Additional attribute information for each location includes coordinates and a link to download the AERMOD data as a zip file.The Air Quality Section of the Ministry of Environment uses air quality modelling to simulate how air pollutants disperse in the ambient atmosphere in order to help manage the air quality in the province. The models are used to estimate the impact of air pollutants emitted from emission sources, and are typically employed to determine whether existing or new proposed industrial facilities are or will be in compliance with the ambient air quality standards outlined in Table 20 of the province's Environmental Code, June 1, 2015 under The Environmental Management and Protection Act, 2010.  The information needed to run dispersion models consists primarily of emissions and meteorological data. Five years (2012-2016) of preprocessed meteorological datasets in an AERMOD ready format is publicly available. This file is contained in the downloadable zipped file. The zipped file contains five files: the SFC and PFL files are the AERMOD ready files required to run AERMOD (i.e., data, sensible heat flux, frictional velocity, potential temperature gradient, vertical velocity, mixing height, monin-obukhov length, surface roughness, Bowen ratio, albedo, scalar wind speed, wind direction, ambient temperature, precipitation, precipitation rate, relative humidity, surface pressure, and total cloud amounts); the DAT file contains the land use information (i.e., Surface roughness, Bowen ratio and albedo) chosen for each month in the SFC file; the KMZ file contains the wind rose for that location which can be used on Google Earth; and the PNG file contains various graphs of monthly or diurnal meteorological distribution (i.e., temperature, wind speed, daytime mixing heights and sensible heat flux, and stability) which can be used to help determine if that location is representative of the area proposed for modelling.  Please note: Since this data is newly developed, it is possible there may be issues with the data as it gets used in more applications. Ongoing changes, edits and updates may be made by the Air Quality Section of the Ministry of Environment. Is is recommended for any future modelling to download the latest version of the input files and not archive any input files on your own server for future use, unless this notification no longer exists. If there are any issues discovered with data in the zipped file, please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. Your support will be greatly appreciated.  There may be times you feel that the input files are not representative of the proposed modelling domain due to the surrounding features (i.e., forest/agricultural or rural/urban) being different than those used to generate the input files. If that is the case, the modeler can generate the input modelling files themselves. The relevant files to generate these input files are available upon request. Please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. 

During a declared emergency event, this file represents an aggregated dataset that shows all of the active Orders and Alerts in the Province as initiated by the Local Governments or First Nations. When an Order or Alert is rescinded, its status changes to All Clear. The polygon is removed from this layer and copied to the [Historical Orders and Alerts dataset](https://catalogue.data.gov.bc.ca/dataset/historical-orders-and-alerts).