Wildfire location points for the current fire season. This includes both active and inactive fires. Data is supplied through various sources and is updated from the operational systems every 15 minutes. These points are rolled over to Historical Fire Points on April 1 of each year. Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

Wildfire perimeters for the current fire season, including both active and inactive fires, supplied from various sources. The data is refreshed from operational systems every 15 min. These perimeters are rolled over to Historical Fire Polygons on April 1 of each year Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

This dataset includes the extent of the boreal forest as well as the extent of managed boreal forest worldwide. The extent of boreal forest was produced from Brandt et al. (2013) and a modified version of Goudilin (1987). Managed forest was defined as suggested by IPCC (2003) using data from FAFS (2009), Gauthier et al. (2014), See et al. (2015) and AICC maps. The extent of managed forest mostly includes areas managed for wood production, areas protected from large-scale disturbances as well as formal protected areas.Both boreal forest extent and managed boreal forest extent are available in raster and vector data.Please cite this data product as:Boucher, D., D.G. Schepaschenko, S. Gauthier, P. Bernier, T. Kuuluvainen, A. Z. Shvidenko. 2024. World boreal forest and managed boreal forest extent. DOI: 10.23687/88d70716-2600-4995-8d5f-86f96e383abfThese data were presented in the following article:Gauthier, S., P. Bernier, T. Kuuluvainen, A. Z. Shvidenko, D. G. Schepaschenko. 2015. Boreal forest health and global change. Science 349:819-822. DOI: 10.1126/science.aaa9092References:J. P. Brandt, M. D. Flannigan, D. G. Maynard, I. D. Thompson, W. J. A. Volney, Environ. Rev. 21, 207–226 (2013)I. S. Goudilin, Landscape map of the USSR. Legend to the landscape map of the USSR. Scale 1:2 500 000. Moscow, Ministry of Geology of the USSR (1987) [in Russian].Inter-governmental panel on climate change (IPCC). J. Penman, M. Gytarsky, T. Hiraishi, T. Krug, D. Kruger, et al., Eds., Good practice guidance for land use, land-use change and forestry (IPCC/NGGIP/IGES, Kanawaga, 2003)Federal Agency of Forest Service (FAFS), Forest Fund of the Russian Federation (state by 1 January 2009) (Federal Agency of Forest Service, Moscow, 2009) [in Russian]S. Gauthier et al., Environ. Rev. 22, 256–285 (2014).See et al., Harnessing the power of volunteers, the internet and Google Earth to collect and validate global spatial information using Geo-Wiki. Technological Forecasting and Social Change. (2015). doi:10.1016/j.techfore.2015.03.002 Alaska Interagency Coordination Center (AICC). Fire Information. https://fire.ak.blm.gov/content/maps/aicc/Large%20Maps/Alaska_Fire_Management_Options.pdf (the version of 2014 was used)

## Get data on boundaries of local climatic areas used for forest fire weather forecasting. This dataset shows the boundaries of administrative areas used for forest fire weather forecasting. North of the French River, boundaries correspond closely with Environment Canada’s areas for public weather forecasting. South of the French River, 25 Environment Canada areas are combined into six larger areas for provincial forecasting.

Wildfire perimeters for all fire seasons before the current year. Supplied through various sources. Not to be used for legal purposes. These perimeters may be updated periodically during the year. On April 1 of each year the previous year's fire perimeters are merged into this dataset

Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: the fire season length across Canada for a reference period (1981-2010).

Wildfire historic incident point locations for all fire seasons before the current season. Supplied through various sources. Not to be used for legal purposes. This data includes all incidents tracked by BC Wildfire Service, ie. actual fires, suspected fires, nusiance fires, smoke chases, etc. On April 1 of each year this layer is updated with the previous fire season's data

Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the short-term (2011-2040) under the RCP 8.5 (continued emissions increases) compared to reference period across Canada.

Manitoba's Provincial Forest Boundaries (version 6): There are currently 15 provincial forests totalling almost 22,000 km2. Attributes include the name of the provincial forest, the year it was established and its area. Detailed descriptions of Manitoba’s provincial forests are provided in the Provincial Forest Act Regulations.Manitoba's Provincial Forest B oundaries ( V ersion 6 ). Manitoba's provincial forests reserve certain areas in the province for perpetual growth of timber, preserve the forest cover thereon and provide for a reasonable use of all the resources that the forest lands contain. All Crown lands within a provincial forest are withdrawn from disposition, sale, settlement or occupancy, except under authority of the Forest Act . Before the Province of Manitoba was established, European settlers were promised 160 acres of free land if they lived on it and cleared it for agriculture. As a result, farms began replacing our southern forests. The federal government decided they must retain some forests for building material. In 1885 , they established Turtle Mountain, Spruce Woods and Riding Mountain (now a national park) as timber reserves. Duck Mountain and Porcupine Mountain followed in 1906. What started out as federal timber reserves 100 years ago have become our provincial forests of today. Manitoba has 15 provincial forests , totalling almost 22,000 sq. km . These forests are among the highest quality timber stands in the province. Today, our provincial forests are much more than reserves for timber. They are also places for wildlife, recreation and research. Control of Manitoba's forests was transferred from the federal to the provincial governments in 1930. Provincial forests are Crown lands owned by the people of Manitoba. The feature class name (BDY_MB_PROV_FOREST_PY) components include: 1. ISO 19115 Topic Category Name (BDY for boundary); 2. Location code (MB for Manitoba); 3. Intuitive or descriptive name (PROV_FOREST); 4. Data/geometry type (PY for polygon); 5. Version number (v 6 ).Manitoba's provincial forests include Agassiz Provincial Forest, Belair Provincial Forest, Brightstone Sand Hills Provincial Forest, Cat Hills Provincial Forest, Cormorant Provincial Forest, Duck Mountain, Moose Creek Provincial Forest, Northwest Angle Provincial Forest, Porcupine Provincial Forest, Sandilands Provincial Forest, Spruce Woods Provincial Forest, Swan-Pelican Provincial Forest, Turtle Mountain Provincial Forest, Wampum Provincial Forest, and Whiteshell Provincial Forest.Detailed descriptions of Manitoba’s Provincial Forests are provided in the Provincial Forest Act Regulations. The dataset includes the following fields : Name / Nom Alias Description PROV_FOREST_ID Provincial Forest ID / No de la forêt provinciale Provincial Forest identifier Identificateur de la forêt provinciale PROV_FOREST_NAME Provincial Forest Name Provincial Forest name -- NOM_FORET_PROV Nom de la forêt provinciale -- Nom de la forêt provinciale ESTABLISHED Year Established / Année d’établissement The year that the provincial forest was established L’année où la forêt provinciale a été établie AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares

The spatial representation for a Forest Deletion, which is any Forest land that is to be removed from the land designated by the Lieutenant Governor into an established forest