Non-Productive Forest: Potential Moose Habitat within the Lillooet Timber Supply Area

Areas of non-productive forest land in the Cariboo Region. Includes icefields, alpine areas, rock, gravel pits, sand, clay, non-productive brush, etc. From FC1 circa 2002

Productive forest land base is defined as the total Crown forest area, determined by subtracting the following from the total area of the Cariboo Natural Resource Region: * All non-Crown land * All Crown land committed to non-timber use through a Land Act designation * All non-forest Crown Land, and * All forest area classified as brush or non-commercial cover in the Forest Inventory. See the CCLUP Land Use Order Implementation Direction for more information: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/natural-resource-use/land-water-use/crown-land/land-use-plans-and-objectives/cariboo-region/cariboochilcotin-rlup/cclup_land_use_order_implementation_direction_companion.pdf

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

Manitoba's Provincial Forest Boundaries (version 6): There are currently 15 provincial forests totalling almost 22,000 km2. Attributes include the name of the provincial forest, the year it was established and its area. Detailed descriptions of Manitoba’s provincial forests are provided in the Provincial Forest Act Regulations.Manitoba's Provincial Forest B oundaries ( V ersion 6 ). Manitoba's provincial forests reserve certain areas in the province for perpetual growth of timber, preserve the forest cover thereon and provide for a reasonable use of all the resources that the forest lands contain. All Crown lands within a provincial forest are withdrawn from disposition, sale, settlement or occupancy, except under authority of the Forest Act . Before the Province of Manitoba was established, European settlers were promised 160 acres of free land if they lived on it and cleared it for agriculture. As a result, farms began replacing our southern forests. The federal government decided they must retain some forests for building material. In 1885 , they established Turtle Mountain, Spruce Woods and Riding Mountain (now a national park) as timber reserves. Duck Mountain and Porcupine Mountain followed in 1906. What started out as federal timber reserves 100 years ago have become our provincial forests of today. Manitoba has 15 provincial forests , totalling almost 22,000 sq. km . These forests are among the highest quality timber stands in the province. Today, our provincial forests are much more than reserves for timber. They are also places for wildlife, recreation and research. Control of Manitoba's forests was transferred from the federal to the provincial governments in 1930. Provincial forests are Crown lands owned by the people of Manitoba. The feature class name (BDY_MB_PROV_FOREST_PY) components include: 1. ISO 19115 Topic Category Name (BDY for boundary); 2. Location code (MB for Manitoba); 3. Intuitive or descriptive name (PROV_FOREST); 4. Data/geometry type (PY for polygon); 5. Version number (v 6 ).Manitoba's provincial forests include Agassiz Provincial Forest, Belair Provincial Forest, Brightstone Sand Hills Provincial Forest, Cat Hills Provincial Forest, Cormorant Provincial Forest, Duck Mountain, Moose Creek Provincial Forest, Northwest Angle Provincial Forest, Porcupine Provincial Forest, Sandilands Provincial Forest, Spruce Woods Provincial Forest, Swan-Pelican Provincial Forest, Turtle Mountain Provincial Forest, Wampum Provincial Forest, and Whiteshell Provincial Forest.Detailed descriptions of Manitoba’s Provincial Forests are provided in the Provincial Forest Act Regulations. The dataset includes the following fields : Name / Nom Alias Description PROV_FOREST_ID Provincial Forest ID / No de la forêt provinciale Provincial Forest identifier Identificateur de la forêt provinciale PROV_FOREST_NAME Provincial Forest Name Provincial Forest name -- NOM_FORET_PROV Nom de la forêt provinciale -- Nom de la forêt provinciale ESTABLISHED Year Established / Année d’établissement The year that the provincial forest was established L’année où la forêt provinciale a été établie AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares

Wildfire perimeters for the current fire season, including both active and inactive fires, supplied from various sources. The data is refreshed from operational systems every 15 min. These perimeters are rolled over to Historical Fire Polygons on April 1 of each year Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province

Wildfire location points for the current fire season. This includes both active and inactive fires. Data is supplied through various sources and is updated from the operational systems every 15 minutes. These points are rolled over to Historical Fire Points on April 1 of each year. Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha. These maps are not available as geo-referenced rectified images or GIS-ready data.

The spatial representation for a Forest Deletion, which is any Forest land that is to be removed from the land designated by the Lieutenant Governor into an established forest