Manitoba's Provincial Forest Boundaries (version 6): There are currently 15 provincial forests totalling almost 22,000 km2. Attributes include the name of the provincial forest, the year it was established and its area. Detailed descriptions of Manitoba’s provincial forests are provided in the Provincial Forest Act Regulations.Manitoba's Provincial Forest B oundaries ( V ersion 6 ). Manitoba's provincial forests reserve certain areas in the province for perpetual growth of timber, preserve the forest cover thereon and provide for a reasonable use of all the resources that the forest lands contain. All Crown lands within a provincial forest are withdrawn from disposition, sale, settlement or occupancy, except under authority of the Forest Act . Before the Province of Manitoba was established, European settlers were promised 160 acres of free land if they lived on it and cleared it for agriculture. As a result, farms began replacing our southern forests. The federal government decided they must retain some forests for building material. In 1885 , they established Turtle Mountain, Spruce Woods and Riding Mountain (now a national park) as timber reserves. Duck Mountain and Porcupine Mountain followed in 1906. What started out as federal timber reserves 100 years ago have become our provincial forests of today. Manitoba has 15 provincial forests , totalling almost 22,000 sq. km . These forests are among the highest quality timber stands in the province. Today, our provincial forests are much more than reserves for timber. They are also places for wildlife, recreation and research. Control of Manitoba's forests was transferred from the federal to the provincial governments in 1930. Provincial forests are Crown lands owned by the people of Manitoba. The feature class name (BDY_MB_PROV_FOREST_PY) components include: 1. ISO 19115 Topic Category Name (BDY for boundary); 2. Location code (MB for Manitoba); 3. Intuitive or descriptive name (PROV_FOREST); 4. Data/geometry type (PY for polygon); 5. Version number (v 6 ).Manitoba's provincial forests include Agassiz Provincial Forest, Belair Provincial Forest, Brightstone Sand Hills Provincial Forest, Cat Hills Provincial Forest, Cormorant Provincial Forest, Duck Mountain, Moose Creek Provincial Forest, Northwest Angle Provincial Forest, Porcupine Provincial Forest, Sandilands Provincial Forest, Spruce Woods Provincial Forest, Swan-Pelican Provincial Forest, Turtle Mountain Provincial Forest, Wampum Provincial Forest, and Whiteshell Provincial Forest.Detailed descriptions of Manitoba’s Provincial Forests are provided in the Provincial Forest Act Regulations. The dataset includes the following fields : Name / Nom Alias Description PROV_FOREST_ID Provincial Forest ID / No de la forêt provinciale Provincial Forest identifier Identificateur de la forêt provinciale PROV_FOREST_NAME Provincial Forest Name Provincial Forest name -- NOM_FORET_PROV Nom de la forêt provinciale -- Nom de la forêt provinciale ESTABLISHED Year Established / Année d’établissement The year that the provincial forest was established L’année où la forêt provinciale a été établie AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares

Represents the gross area boundary within which Saskatchewan Crown resource lands are designated as provincial forests.For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. For the northern, eastern and western portions of the Northern Provincial Forest, boundaries were sourced from the SaskGIS Provincial Boundary data set (ADMINISTRATIVE.provincial_boundary) produced by Information Services Corporation. This data set depicts the provincial boundary of the province of Saskatchewan as reflected in the respective jurisdictional boundary acts, and is kept current on a monthly basis. The version used here has an effective date of 31 May 2020. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations

Represents the boundary line of Saskatchewan Crown resource lands designated as provincial forests as described in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020.Boundaries of the Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests are described, as well as the southern portion of the Northern Provincial Forest. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations The provincial forest boundary is described by clauses and subclauses in The Forest Resources Management Regulations. Each provincial forest boundary description clause and subclause has a corresponding line feature in FORESTRY.PLANNING_Forest_Boundary. Clause descriptions position provincial forest boundary line features according to Saskatchewan’s Land Survey System by Township, Range, and Meridian. Subclause descriptions further positions provincial forest boundary line features within the clause. When a subclause describes the provincial forest boundary according to a water body or water course bank, line features are digitized from the Saskatchewan Geospatial Imagery Collaborative 2016 three-band (red, green, blue) SPOT 6 and 7 satellite imagery mosaic, pan-sharpened to 1.5 m resolution (IMAGERY.SGIC_SPOT_RGB_2016_Ref). In certain situation, applying this satellite imagery to the provincial forest boundary description results in a gap between land and water. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Land to Water Gap” features are identified as such in the SUBCLAUSE_DESCR field. When a subclause describes the provincial forest boundary according to the Saskatchewan Land Survey System, line features are extracted from Information Services Corporation CADASTRE data (CADASTRE.SG_SECTION, .SG_QUARTERSECTION, .SG_LEGALSUBDIVISION, .surface, .boundary, .right_of_way). By convention, the west boundary of a line feature is defined by the vector west of the road allowance and the south boundary of a line feature is defined by the vector south of the road allowance. In certain situation, applying this convention to the provincial forest boundary description results in a gap created by an adjacent east or north road allowance. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Road Allowance Gap” features are identified as such in the SUBCLAUSE_DESCR field. In spite of west / south boundary road allowance convention, when a road allowance forms the boundary of the provincial forest, in FORESTRY.PLANNING_Forest_Boundary, the line feature is drawn such that the road allowance is excluded from the provincial forest.

The spatial representation for a Provincial Forest, which is any forest land that is designated by the Lieutenant Governor in council, to be managed and used for the social and economic benefit of the Province

The spatial representation for a Forest Exclusion, which is an areas or block excluded from Provincial Forest at the time of the original establishment by Order in Council

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province

Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

Priority for snow removal on the road network according to three service levels (1, 2 and 3) or under provincial jurisdiction (MTQ) .attributs:ID - Unique IdentifierPriority - Service Level or Provincial Jurisdiction (MTQ)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Provides a provincial coverage of 33 NBHC communities. All communities are groupings of municipalities (Census subdivisions).

Provincial listing of Active Condominium Corporation in Nova Scotia by County.