Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

Represents the boundary line of Saskatchewan Crown resource lands designated as provincial forests as described in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020.Boundaries of the Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests are described, as well as the southern portion of the Northern Provincial Forest. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations The provincial forest boundary is described by clauses and subclauses in The Forest Resources Management Regulations. Each provincial forest boundary description clause and subclause has a corresponding line feature in FORESTRY.PLANNING_Forest_Boundary. Clause descriptions position provincial forest boundary line features according to Saskatchewan’s Land Survey System by Township, Range, and Meridian. Subclause descriptions further positions provincial forest boundary line features within the clause. When a subclause describes the provincial forest boundary according to a water body or water course bank, line features are digitized from the Saskatchewan Geospatial Imagery Collaborative 2016 three-band (red, green, blue) SPOT 6 and 7 satellite imagery mosaic, pan-sharpened to 1.5 m resolution (IMAGERY.SGIC_SPOT_RGB_2016_Ref). In certain situation, applying this satellite imagery to the provincial forest boundary description results in a gap between land and water. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Land to Water Gap” features are identified as such in the SUBCLAUSE_DESCR field. When a subclause describes the provincial forest boundary according to the Saskatchewan Land Survey System, line features are extracted from Information Services Corporation CADASTRE data (CADASTRE.SG_SECTION, .SG_QUARTERSECTION, .SG_LEGALSUBDIVISION, .surface, .boundary, .right_of_way). By convention, the west boundary of a line feature is defined by the vector west of the road allowance and the south boundary of a line feature is defined by the vector south of the road allowance. In certain situation, applying this convention to the provincial forest boundary description results in a gap created by an adjacent east or north road allowance. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Road Allowance Gap” features are identified as such in the SUBCLAUSE_DESCR field. In spite of west / south boundary road allowance convention, when a road allowance forms the boundary of the provincial forest, in FORESTRY.PLANNING_Forest_Boundary, the line feature is drawn such that the road allowance is excluded from the provincial forest.

Represents the gross area boundary within which Saskatchewan Crown resource lands are designated as provincial forests.For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. For the northern, eastern and western portions of the Northern Provincial Forest, boundaries were sourced from the SaskGIS Provincial Boundary data set (ADMINISTRATIVE.provincial_boundary) produced by Information Services Corporation. This data set depicts the provincial boundary of the province of Saskatchewan as reflected in the respective jurisdictional boundary acts, and is kept current on a monthly basis. The version used here has an effective date of 31 May 2020. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations

The purpose of this feature class is to identify the individual annual allowable cut and annual limit areas as referred to in the Forest Resources Act subsection 20(2) and 31(10 of the Forest Resources Regulation). Where there is no approved Forest Resources Management Plan (FRMP) for an area, forest resources harvesting can only be authorized in an amount less than that prescribed by regulation for that area. The Forest Resources Regulation subsection 31(1) establishes the annual limits for harvesting timber resources for areas without an FRMP. These areas are referred to as the Annual Limit Regions in Schedule 1 of the Regulation titled Timber Harvesting Areas. These annual limits are set as the annual allowable cut for each of the areas, until such time as a Forest Resources Management Plan is approved for that area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This feature class represents Manitoba's Forest Management Licence (FML) boundaries.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than twenty years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently two Forest Management Licences in Manitoba, FML-2 and FML-3 . Timber management and forest renewal are the responsibilities of Manitoba Sustainable Government on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSA's have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with linework from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve Provincial FML boundaries. Boundary linework the following related geospatial datasets were topologically checked for coincident linework: Manitoba Provincial Boundary; Manitoba Forest Management Units ; Manitoba Forest Management Licence Agreement Areas; Manitoba Forest Sections; Manitoba Provincial Forests . Fields Included: FML_NAME : Forest Management Licence area name.

Manitoba's Forest Management Licence Area (FML) Boundaries – Version 4.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than 20 years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently three Forest Management Licences in Manitoba. Timber management and forest renewal are the responsibilities of Manitoba Conservation on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 4 of Manitoba's Forest Management Licence (FML) boundaries incorporates minor edits made to the BDY_MB_FMU_PY feature class, ensuring coincident line work with the provincial boundary and provincial forests. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSAs have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with line work from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve p rovincial FML boundaries. Boundary line work for all of the following feature classes were topologically checked for coincident line work: 1. BDY_MB_FMU_PY (Provincial FMUs); 2. Provincial Boundary; 3. BDY_MB_FML_PY (Provincial Forest Management Licence Areas); 4. BDY_MB_FOREST_SECTION_PY (Provincial Forest Sections); 5. BDY_MB_PROV_FOREST_PY (Provincial Forests)   The dataset includes the following fields /Les ensembles de données comprennent les champs suivants Name / Nom Alias Description FML FML Forest Management Licence Area number Numéro de zone de gestion forestière visée par une licence FML_NAME FML Name / Nom Forest Management Licence Area name Nom de zone de gestion forestière visée par une licence AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares   Limites des zones de gestion forestière du Manitoba visées par une licence – Version 4

This dataset is produced for the Government of Alberta and is available to the general public. The Forest Management Agreement (FMA) Published Area dataset consists of polygons representing the areas of land where the Province of Alberta grants FMA holders the rights to establish, grow, harvest, and remove timber in accordance with the relevant regulations and policies. Please note that the distribution contact differs for the general public compared to Government of Alberta ministries. Refer to the Distribution Information section of this metadata for the appropriate contact to acquire this dataset.

Forest resource roads (FRR) are actively used for accessing forest resources. FRRs are tracked and managed in a road management database. These roads do not represent a complete road network, they should be viewed in conjunction with the Roads -50k - Canvec dataset. Many FRRs are gated with controlled access. There are four categories of roads in the dataset: Forest Resource Roads (act); Forest Resource Access (non-act), Public Access (non-act) and auxiliary roads:- Forest resources road (Act): a road constructed, modified or maintained for the purpose of providing access for forest resources harvesting or management of forest resources that is authorized under subsection 32(1) of the Act, or a road designated as forest resources road under section 73 of the Regulation. These roads were constructed or designated after the Forest Resources Act and Regulation were enacted. - Forest resource access (non-Act): a road constructed, modified or maintained for the purpose of providing access for forest resources harvesting or management of forest resources that is considered a capital investment by the Government of Yukon, Department of Energy, Mines and Resources, Forest Management Branch. These roads were constructed prior to the enactment of the Forest Resources Act. - Public Access (non act): a pre-existing public road. In this road network all Public Access is part of the forest resource access network. - Auxiliary access: a variety of access types that do not conform to the above descriptions and may include: research forest trails, skid trails, heritage trails, trails that access forest resources. Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Private map (managed forest code 50) used in the Story Map of Forest Management in Canada, 2017.Private map (managed forest code 50) used in the  Story Map of Forest Management in Canada, 2017. Private lands were identified using provincial and territorial land ownership datasets. Detailed ownership datasets were not available in all jurisdictions, so proxies were used where necessary. In Saskatchewan, lands south of the province's Commercial Forest Zone were classified as Private. This includes some Crown lands, but these are generally small and not included in forest management plans or leased for commercial forestry purposes. Source:  This web map shows the private areas used in the map of forest management in Canada, 2017 and includes the following tiled layer: Private (Managed Forest Code 50)Data provided by Alberta Agriculture and Forestry; British Columbia Ministry of Forests; Manitoba Sustainable Development; Natural Resources Canada; New Brunswick Department of Energy and Resource Development; Newfoundland & Labrador Department of Fisheries and Land Resources; Northwest Territories Department of Environment and Natural Resources; Nova Scotia Department of Lands and Forestry; Ontario Ministry of Natural Resources and Forestry; Prince Edward Island Department of Communities, Land & Environment; Québec Ministère des Forêts, de la Faune et des Parcs; Saskatchewan Ministry of Environment; and Yukon Energy, Mines and Resources.

The purpose of this feature class is to identify the forest resources management zones within a Forest Resources Management Plan, as per subsection 2(h) of the Forest Resources Regulation. These sub-divided smaller forest planning areas or landscape units are based on watershed boundaries and modified by local access and development patterns. They usually contain similar management concerns and forest types. The units form the boundaries for detailed information gathering, monitoring and planning.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)