Bay and Channel (fresh and marine) features and associated names

This data is intended to identify Canadian fresh waters which require additional measures (e.g., ballast water exchange and treatment) prior to release, as described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, vessels which are managing ballast water to meet the ballast water performance standard cannot release ballast water into fresh waters unless that ballast water was first exchanged in accordance with the ballast water exchange standard. For the purpose of this requirement, Canadian fresh waters are the following:- the waters at the Port of Kitimat and waters in or upstream of the Kitimat Arm, east of a line between Hilton Point and Steel Point;- the waters at the Port of Stewart and waters in or upstream of the Portland Canal, north of a line between Portland Point and Ramsden Point;- the waters of all Fraser River ports that are: -- east of Tilbury Island in the main arm of the Fraser River including Annacis Island and New Westminster docking areas; and -- east of the eastern tip of Mitchell Island in the north arm of Fraser River;- the waters of the Saguenay River ports and waters upstream of L’Anse-Creuse;- the waters of all St. Lawrence River ports and waters west of the east point of Ile d’Orléans including the port of Quebec City;- all Canadian waters of the Great Lakes Basin; and- the waters of Happy Valley-Goose Bay and waters of Lake Melville west of Rabbit Island.Legal Constraints: Users should be aware that the polygons depicting areas requiring additional measures to manage ballast water are intended for illustration only and should not be used for navigational or legal purposes.

Digitization of long-term water chemistry data collected between 1920's - 1990's from lakes across Saskatchewan by the Saskatchewan Fisheries Research Laboratory. Samples were collected using methods from the Standard Methods for the Examination of Water and Wastewater (APHA, AWWA and WPCF). This data serves as a baseline for water quality.This dataset is a digitization from paper records of water chemistry data across Saskatchewan collected by the Saskatchewan Fisheries Research Laboratory. Data ranges from the 1920's to the 1990's and were sampled using methodes from the Standard Methods for the Examination of Water and Wastewater (American Public Health Association, American Water Works Association and Water Pollution Control Facility) This long-term water chemistry data serves as a baseline for water quality. Different variables of water chemistry are organized into individual fields. The units of measurement appear at the end of each field name. Due to the historical nature of the data some uncertainty exist in values.  Additonal notes on data: ND: no detection Trace: trace amounts Nil: zero NA: no data 

Named point features (both fresh and marine) such as points of land, etc. Point names included as an attribute

Point features showing the location of intakes and/or wellheads for drinking water systems. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. These locations are updated as more information is received and is therefore continually being updated and may or may not match the corresponding Point of Diversion locations available through the Water Rights dataset and application. This is one of three Drinking Water Sources datasets (along with the DWS - Source Areas polygons dataset, and DWS - Protection Zones polygons dataset). Note: the polygons all have unique polygon IDs used to relate them to these points.

The contaminants in fish database is a compilation of contaminant data analysed from fish tissue at the Fresh Water Institute from 1970 to 2005. Data include lab number, region, analysis, organs, species, lake, form (whole fish, headon dressed, headless dressed), weight, and length and contaminant concentrations. Total mercury was the predominant contaminant measured. Results were expressed as ppm or ppb based on the parameter analyzed. Concentrations are expressed based on wet weight.

The theme on physicochemical monitoring of rivers and rivers presents data from all stations in networks monitoring water quality in rivers in Quebec and the St. Lawrence River.The purpose of networks for monitoring general water quality is to characterize, using current physicochemical and bacteriological parameters, the quality of water in spatial terms and to monitor the evolution of this quality over time. For the regular monitoring of the general quality of river and river water, the parameters measured are: total phosphorus, total nitrogen, nitrites and nitrates, ammonia nitrogen, chlorophyll a, pheopigments, faecal coliforms, faecal coliforms, turbidity, suspended matter, pH, conductivity, dissolved organic carbon and temperature. This data is used to calculate the Bacteriological and Physicochemical Water Quality Index (IQBP), a water quality classification index.The data set on physicochemical monitoring of rivers and rivers also includes the drainage areas of some of the stations. The attribute table provides a compilation of land use by category for the last year available at the time the data was generated. Follow-up is carried out annually.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A wide range of different territorial, federal, and first nation governments have a role in monitoring water. The water monitoring sites data set compiles these varied sources into a single source with the intent to provide a 'one-stop shop' when searching for water monitoring data. Information contained includes the 'who, what, when, and where' of water monitoring by providing contact information, sample type, sample period, and location.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset displays aquifers with water allocation notations on them. This dataset is updated daily.

This data is intended to identify Canadian Alternate Exchange Areas described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, if your vessel enters waters under Canadian jurisdiction from somewhere other than the U.S. waters within the Great Lakes Basin, and it cannot conduct a ballast water exchange in the areas set out in paragraphs 14(1)(a) and (b) of the regulations, then it will have to conduct a ballast water exchange in one of the areas listed below:-Gulf of St. Lawrence-Atlantic Canada-Western Canada-Canadian Eastern Arctic-Canadian Western Arctic: If you bring your vessel to a Canadian port, offshore terminal or anchorage area in the Western Arctic ballast water must be exchanged in an area as far away from shore as possible, where the water is more than 100 meters deep.Legal Constraints: Users should be aware that the polygons depicting ballast water exchange areas are intended for illustration only and should not be used for navigational or legal purposes.