Feature layer of the Manitoba provincial boundary.A feature layer of Manitoba's provincial boundaries:Manitoba/Ontario boundary, Manitoba/Saskatchewan boundary, Manitoba/Nunavut boundary, International boundary. Excluding the International Boundary, the graphical data was computed from original boundary survey measurements published in respective official boundary commission reports using least squares adjustment software "Manor". The adjustments were constrained to known NAD83 [nmip94 adj.] federal/provincial boundary marker positions. For the International Boundary, the graphics were created by converting the official published NAD27 marker positions for the boundary into NAD83 using datum conversion software NTv2 and interconnecting the plotted marker positions with straight lines using CARIS map software. The purpose is to provide end users with a digital map of Manitoba's boundaries.  This data layer is suitable for most medium and small scale digital map applications as well as GIS georeferencing in general. This Manitoba provincial boundary was originally published on January 12, 2004. It was uploaded to Manitoba Maps as a feature layer on December 15, 2016. Use Constraints: The Hudson Bay shoreline for this product was taken from 1:500,000 scale digital mapping and is intended for generalized small scale mapping of this portion of the provincial boundary. Estimated accuracy if plus or minus 125m. Fields Included: FID: Sequential unique whole numbers that are automatically generated, AREA: GIS area in square-metres calculated in the NAD83 Universal Transverse Mercator Zone 14 coordinate system, PERIMETER: GIS perimeter in metres calculated in the NAD83 Universal Transverse Mercator Zone 14 coordinate system, NAME: province name

Represents the gross area boundary within which Saskatchewan Crown resource lands are designated as provincial forests.For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. For the northern, eastern and western portions of the Northern Provincial Forest, boundaries were sourced from the SaskGIS Provincial Boundary data set (ADMINISTRATIVE.provincial_boundary) produced by Information Services Corporation. This data set depicts the provincial boundary of the province of Saskatchewan as reflected in the respective jurisdictional boundary acts, and is kept current on a monthly basis. The version used here has an effective date of 31 May 2020. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the Alberta Provincial Boundary ATS v4.1 polygon layer contains the polygon that represents the location of the boundaries of the Province of Alberta. This version of the Province of Alberta boundaries should be considered definitive for Government of Alberta use, and supersedes all previous versions.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Quarter Section with Road Allowance layer contains polygons that represent the location of Quarter Sections and adjacent Road Allowance Segment polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Quarter Section with Road Allowance layer contains polygons that represent the location of Quarter Sections and adjacent dissolved Road Allowance Segment polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Township Index polygon layer contains polygons that represent the location of Township polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary. No road allowance segments are included in this layer.

Ministry of Transportation Regional Boundary is an exclusive geographic area within the province that the Ministry organizational unit is responsible for. Each Ministry Region is partitioned into one or more non-overlapping Ministry Districts that cover the entire Ministry Region

Manitoba's forest boundaries datasets in 2021. This data is used within Manitoba's Five Year Report on the Status of Forestry, 2016 - 2021 story map.Manitoba's forest boundaries datasets in 2021. This data is used within Manitoba's Five Year Report on the Status of Forestry, 2016 - 2021 story map.  The forest boundaries included represent forest sections, forest management units, provincial forests and forest management license areas.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Legal Subdivision (LSD) with Road Allowance layer contains polygons that represent the location of LSD and adjacent Road Allowance Segment polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary. Legal Subdivisions and adjacent road allowance segment polygons are new data that were not available for publication at the inception of ATS Version 4.1.

Manitoba's Provincial Forest Boundaries (version 6): There are currently 15 provincial forests totalling almost 22,000 km2. Attributes include the name of the provincial forest, the year it was established and its area. Detailed descriptions of Manitoba’s provincial forests are provided in the Provincial Forest Act Regulations.Manitoba's Provincial Forest B oundaries ( V ersion 6 ). Manitoba's provincial forests reserve certain areas in the province for perpetual growth of timber, preserve the forest cover thereon and provide for a reasonable use of all the resources that the forest lands contain. All Crown lands within a provincial forest are withdrawn from disposition, sale, settlement or occupancy, except under authority of the Forest Act . Before the Province of Manitoba was established, European settlers were promised 160 acres of free land if they lived on it and cleared it for agriculture. As a result, farms began replacing our southern forests. The federal government decided they must retain some forests for building material. In 1885 , they established Turtle Mountain, Spruce Woods and Riding Mountain (now a national park) as timber reserves. Duck Mountain and Porcupine Mountain followed in 1906. What started out as federal timber reserves 100 years ago have become our provincial forests of today. Manitoba has 15 provincial forests , totalling almost 22,000 sq. km . These forests are among the highest quality timber stands in the province. Today, our provincial forests are much more than reserves for timber. They are also places for wildlife, recreation and research. Control of Manitoba's forests was transferred from the federal to the provincial governments in 1930. Provincial forests are Crown lands owned by the people of Manitoba. The feature class name (BDY_MB_PROV_FOREST_PY) components include: 1. ISO 19115 Topic Category Name (BDY for boundary); 2. Location code (MB for Manitoba); 3. Intuitive or descriptive name (PROV_FOREST); 4. Data/geometry type (PY for polygon); 5. Version number (v 6 ).Manitoba's provincial forests include Agassiz Provincial Forest, Belair Provincial Forest, Brightstone Sand Hills Provincial Forest, Cat Hills Provincial Forest, Cormorant Provincial Forest, Duck Mountain, Moose Creek Provincial Forest, Northwest Angle Provincial Forest, Porcupine Provincial Forest, Sandilands Provincial Forest, Spruce Woods Provincial Forest, Swan-Pelican Provincial Forest, Turtle Mountain Provincial Forest, Wampum Provincial Forest, and Whiteshell Provincial Forest.Detailed descriptions of Manitoba’s Provincial Forests are provided in the Provincial Forest Act Regulations. The dataset includes the following fields : Name / Nom Alias Description PROV_FOREST_ID Provincial Forest ID / No de la forêt provinciale Provincial Forest identifier Identificateur de la forêt provinciale PROV_FOREST_NAME Provincial Forest Name Provincial Forest name -- NOM_FORET_PROV Nom de la forêt provinciale -- Nom de la forêt provinciale ESTABLISHED Year Established / Année d’établissement The year that the provincial forest was established L’année où la forêt provinciale a été établie AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares