The map identifies surficial materials and associated landforms left by the retreat of the last glaciers and non glacial environments. The surficial geology is based on compilation of existing maps. This work provides new geological knowledge and improves our understanding ofthe distribution, nature and glacial history of surficial materials. It contributes to resource assessments and effective land use management.This new surficial geology map product represents the conversion of the map "Surficial Materials of Canada" (Fulton, 1995) and its legend, using the Geological Survey of Canada's Surficial Data Model (SDM version 2.0) which can be found in Open File 7631 (Deblonde et al.,2014). All geoscience knowledge and information from map 1880A that conformed to the current SDM were maintained during the conversion process. However, only terrestrial units are depicted on this map. Map units below modern sea level or major lake levels are not shown but are maintained in the digital data of this publication. Where additional information was required in certain regions of the Arctic and Cordillera, legacy geology map data were used. These maps are listed in the digital "Map Information" document. All other source maps used in map 1880A are not relisted here. The purpose of converting legacy map data to a common science language and common legend is to enable and facilitate the efficient digital compilation, interpretation, management and dissemination of geologic map information in a structured and consistent manner. This provides an effective knowledge management tool designed around a geo-database which can expand following the type of information to appear on new surficial geology maps.

An interpretation of bedrock geology, topography and other sources of information that shows the potential for karst formations. This is a reconnaissance level map for all of British Columbia

Surficial geologic units are unconsolidated materials overlying bedrock. The dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of sediment in the hydrogeological unit. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

The confinement describes the types of aquifer: confined, unconfined and semi-confined. Confined aquifer is bounded from above and below by impervious formations. Unconfined aquifer has a water table which serves as its upper boundary. Semi-confined aquifer is in between. Aquifer confinement is derived from geology, stratigraphy and hydrogeological unit thickness. The dataset represents the confinement assessment of the local area over the hydrogeological unit, from a controlled vocabulary.

This entry provides access to surficial geology maps that have been published by the Geological survey of Canada. Two series of maps are available: "A Series" maps, published from 1909 to 2010 and "Canadian Geoscience Maps", published since 2010.Three types of CGM-series maps are available: 1)Surficial Geology: based on expert-knowledge full air photo interpretation (may include interpretive satellite imagery, Digital Elevation Models (DEM)), incorporating field data and ground truthing resulting from extensive, systematic fieldwork across the entire map area. Air photo interpretation includes map unit/deposit genesis, texture, thickness, structure, morphology, depositional or erosional environment, ice flow or meltwater direction, age/cross-cutting relationships, landscape evolution and associated geological features, complemented by additional overlay modifiers, points and linear features, selected from over 275 different geological elements in the Surficial Data Model. Wherever possible, legacy data is also added to the map. 2)Reconnaissance Surficial Geology: based on expert-knowledge full air photo interpretation (may include interpretive satellite imagery, DEMs), with limited or no fieldwork. Air photo interpretation includes map unit/deposit genesis, texture, thickness, structure, morphology, depositional or erosional environment, ice flow or meltwater direction, age/cross-cutting relationships, landscape evolution and associated geological features, complemented by additional overlay modifiers, points and linear features, selected from over 275 different geological elements in the Surficial Data Model. Wherever possible, legacy data is also added to the map. 3)Predictive Surficial Geology: derived from one or more methods of remote predictive mapping (RPM) using different satellite imagery, spectral characteristics of vegetation and surface moisture, machine processing, algorithms etc., DEMs, where raster data are converted to vector, with some expert-knowledge air photo interpretation (training areas or post-verification areas), varying degrees of non-systematic fieldwork, and the addition of any legacy data available. Each map is based on a version of the Geological Survey of Canada's Surficial Data Model (https://doi.org/10.4095/315021), thus providing an easily accessible national surficial geological framework and context in a standardized format to all users."A series" maps were introduced in 1909 and replaced by CGM maps in 2010. The symbols and vocabulary used on those maps was not as standardized as they are in the CGM maps. Some "A series" maps were converted into, or redone, as CGM maps, Both versions are available whenever that is the case.In addition to CGM and "A series" maps, some surficial geology maps are published in the Open File series. Those maps are not displayed in this entry, but can be found and accessed using the NRCan publications website, GEOSCAN:(https://geoscan.nrcan.gc.ca).

To support improved groundwater geoscience knowledge for southern Ontario, a regional 3-D model of the surficial geology of southern Ontario has been developed as a part of a collaboration between the Ontario Geological Survey and the Geological Survey of Canada. Covering approximately 66,870 km2 in area, the model is a synthesis of existing geological models, surficial geology mapping, and subsurface data. The model is a simplified 9-layer reclassification of numerous mapped local surficial sediment formations in places over 200 m thick with a total volume of approximately 2,455 km3. The model integrates 1:50,000 scale surficial geology mapping with 90 m bathymetrically corrected topographic digital elevation model (DEM) and 8 existing local 3-D models. Archival subsurface data include 10,237 geotechnical and stratigraphic boreholes, 3,312 picks from geophysical surveys, 15,902 field mapping sites and sections, 537 monitoring and water supply wells and 282,995 water well records. Roughly corresponding to regional aquifer and aquitard layers, primary model layers are (from oldest to youngest): Bedrock, Basal Aquifer, Lower Sediment, Regional Till, Post Regional Till Channel Fill, Glaciofluvial Sediment, Post Regional Till Mud, Glaciolacustrine Sand and Recent Sediment / Organics. Modelling was completed using an implicit modelling application (LeapFrog®) complemented by an expert knowledge approach to data classification and rules-based Expert System procedure for data interpretation and validation. An iterative cycle of automated data coding, intermediate model construction and manual data corrections, expert evaluations, and revisions lead to the final 3-D model. A semi-quantitative confidence assessment has been made for each model layer surface based on data quality, distribution and density. This surficial geology model completes the development of a series of regional 3-D geological and hydrogeological models for southern Ontario.

Designated gas storage areas are land areas designated by the Ontario Energy Board that contain geological formations used for subsurface storage of natural gas. This product requires the use of geographic information system (GIS) software.

This dataset shows the surficial geology lines for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan.This dataset shows the surficial geology lines for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. Mapping in support of the dataset includes years of field observations which were then compiled and integrated into this dataset. The data was created as a file geodatabase feature class and output for public distribution. 1:1,000,000 scale surficial geology lines map of Saskatchewan symbol layer.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

Geology faults are part of the British Columbia Digital Geology, which is the data source used for the seamless province-wide, up-to-date, and detailed bedrock geology. The bedrock geology integrates all details of compilations from 1:50,000 to 1:250,000. The data is maintained by a geospatial frame data model with techniques used to simplify the integration process and shorten the time frame from field mapping, compilation, integration, to data delivery. Geology faults with the related data sets, Bedrock Geology and Quaternary Alluvium and Cover, are displayed on MapPlace and MapPlace 2 and is available for download in shapefile and GeoPackage formats.

Layer that includes the known information on potential haul-out sites for the harbour seal and gray seal in the Estuary and Gulf of St. Lawrence according to a literature review of documents produced between 1978 and 2000.Additional InformationPotential haul-out sites for the harbor seal and gray seal were produced according to a literature review of the following documents:Andersen, A. et M. Gagnon. 1980. Les ressources halieutiques de l'estuaire du Saint-Laurent. Rapp. can. ind. sci. halieut. aquat., 119: iv + 56 p.Argus Groupe-Conseil inc. 1992. Synthèse et analyse des connaissances relatives aux ressources naturelles du Saguenay et de l'estuaire maritime du Saint-Laurent. Parc marin du Saguenay. Service canadien des parcs, région du Québec.Biorex. 1995. Cartographie des ressources halieutiques et de leurs habitats dans l'estuaire moyen du Saint-Laurent. Rapport au ministère des Pêches et des Océans, Région du Québec, Division de la gestion de l'habitat du poisson. 36 p. + annexes. Biorex. 1996. Base de données géoréférencées sur les ressources halieutiques et leurs habitats : estuaire maritime du Saint-Laurent et fjord du Saguenay. Rapport au ministère des Pêches et des Océans, Région du Québec, Division de la gestion de l'habitat du poisson. Volume 1 : 38 p. + annexes et Volume 2 : 34 p. + annexes.Chevrier, V. 1994. Cartographie des habitats du poisson aux Îles-de-la-Madeleine. Rapport technique no. 1. Réalisé en collaboration avec le M.P.O., Attention Frag'Îles et la M.R.C. des Îles-de-la-Madeleine. 24 p. + 1 ann. + 36 cartes.Comité de la zone d'intervention prioritaire (ZIP) de la Côte-Nord du golfe. 1999. Inventaire des habitats côtiers et marins sensibles de la Basse-Cote-Nord : Rapport final, présenté à Pêches et Océans Canada par le Comité ZIP Côte-Nord du Golfe. 126 p.Comité de protection de la santé et de l'environnement de Gaspé inc. (C.P.S.E.G.). 1996.Communication personnelle par Carol Fournier, MPO. 1999. Communications personnelles par Gosselin, J-F-. 1996. Desaulniers, J. 1989. Étude des populations de pinnipèdes de l'Archipel-de-Mingan et relation entre l'activité de chasse au phoque et la sécurité publique 1987 à 1989. Parcs Canada. Région du Québec. Service de la conservation des ressources naturelles.Enquêtes auprès des pêcheurs. 1995.Lavigne, P.-J. 1978. La chasse estivale du phoque dans le Saint-Laurent. Rapport non publié. 65 p. Pêches et Océans Canada, Région du Québec.Lesage, Véronique. 2000. Communication personnel.Lesage, V., M. O. Hammill, and K.M. Kovacs. 1995. Harbour seal (Phoca vitulina) and Grey seal (Halichoerus grypus) abundance in the St. Lawrence estuary. Can. Manuscr. Rep. Fish. Aquat. Sci. 2307: iii + 19 p.Naturam Environnement inc. 1996. Caractérisation physique et biologique de l'habitat du poisson du secteur de Pointe-aux-Outardes. Realisé pour le compte de la Corporation du Parc régional de Pointe-aux-Outardes. 196 p.