The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management systems: no till, conventional tillage and summerfallow. It is an estimate of the degree to which cultivation contributes to wind and water erosion. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).This map was created in 2002 using ArcGIS.

To support improved groundwater geoscience knowledge for southern Ontario, a regional 3-D model of the surficial geology of southern Ontario has been developed as a part of a collaboration between the Ontario Geological Survey and the Geological Survey of Canada. Covering approximately 66,870 km2 in area, the model is a synthesis of existing geological models, surficial geology mapping, and subsurface data. The model is a simplified 9-layer reclassification of numerous mapped local surficial sediment formations in places over 200 m thick with a total volume of approximately 2,455 km3. The model integrates 1:50,000 scale surficial geology mapping with 90 m bathymetrically corrected topographic digital elevation model (DEM) and 8 existing local 3-D models. Archival subsurface data include 10,237 geotechnical and stratigraphic boreholes, 3,312 picks from geophysical surveys, 15,902 field mapping sites and sections, 537 monitoring and water supply wells and 282,995 water well records. Roughly corresponding to regional aquifer and aquitard layers, primary model layers are (from oldest to youngest): Bedrock, Basal Aquifer, Lower Sediment, Regional Till, Post Regional Till Channel Fill, Glaciofluvial Sediment, Post Regional Till Mud, Glaciolacustrine Sand and Recent Sediment / Organics. Modelling was completed using an implicit modelling application (LeapFrog®) complemented by an expert knowledge approach to data classification and rules-based Expert System procedure for data interpretation and validation. An iterative cycle of automated data coding, intermediate model construction and manual data corrections, expert evaluations, and revisions lead to the final 3-D model. A semi-quantitative confidence assessment has been made for each model layer surface based on data quality, distribution and density. This surficial geology model completes the development of a series of regional 3-D geological and hydrogeological models for southern Ontario.

A Yukon-wide compilation of 1102 till geochemistry samples collected during 4 regional till sampling surveys conducted by Yukon Geological Survey in the Faro/Anvil Range, Weasel Lake, Finlayson Lake and Glenlyon/East Carmacks areas between 1998 and 2002. Complete analytical results for more than 40 elements are included in the attribute table for each sample.

This layer contains point features that represent New Brunswick Geological Survey till sample locations where laboratory grain size analysis was completed. Grain size data are contained in the attribute data for each location.Grain size analysis is limited to the dry-sieved <2 mm fraction of collected till samples. This fraction of the till sediment is subjected to hydrometer grain size analysis to determine the percentages of sand, silt, and clay. The process is based on the hydrometer method of Bouyoucous 1962.Sand: 63 µm to 2 mmSilt: 2µm to 63 µmClay: < 2 µmBouyoucous, G.H. (1962) Hydrometer Method Improved for Making Particle Size Analysis of Soils. Agronomy Journal, 54, 464-465

This layer contains point features that represent New Brunswick Geological Survey till sample locations where laboratory grain size analysis was completed. Grain size data are contained in the attribute data for each location.Grain size analysis is limited to the dry-sieved <2 mm fraction of collected till samples. This fraction of the till sediment is subjected to hydrometer grain size analysis to determine the percentages of sand, silt, and clay. The process is based on the hydrometer method of Bouyoucous 1962.Sand: 63 µm to 2 mmSilt: 2µm to 63 µmClay: < 2 µmBouyoucous, G.H. (1962) Hydrometer Method Improved for Making Particle Size Analysis of Soils. Agronomy Journal, 54, 464-465

The National Rail Network (NRWN) is a geometric and attributive description of the Canadian rail network.The NRWN product consists of the features classes: Track Segment, Railway Crossing, Railway Station, Marker Post, Junction and Railway Structure. Descriptive attributes include amongst others: Track Classification, Track Name, Track Operator, Track User, Track Owner, Subdivision Name, Junction Type, Crossing Type, Level of Crossing, Warning System, Transport Canada Identifier, Station Name, Station Type, Station User, Structure Type.

The spatial representation for a Natural Resource (NR) District, that is an administrative area established by the Ministry, within NR Regions.

Catch, effort, location (latitude, longitude), relative abundance indices, and associated biological data from groundfish multi-species bottom trawl surveys in Strait of Georgia.IntroductionThe Strait of Georgia (SOG) synoptic bottom trawl survey was conducted in 2012 and 2015. This survey is one of a set of long-term and coordinated surveys that together cover the continental shelf and upper slope of most of the British Columbia coast. The other surveys are the Queen Charlotte Sound (QCS) survey, the Hecate Strait (HS) survey, the West Coast Vancouver Island (WCVI) survey and the West Coast Haida Gwaii (WCHG) survey. The survey was not impacted by the COVID-19 pandemic. The objectives of these surveys are to provide fishery independent abundance indices of all demersal fish species available to bottom trawling and to collect biological samples of selected species. The surveys follow a random depth-stratified design and the sampling units are 2 km by 2 km blocks. The synoptic bottom trawl surveys are conducted by Fisheries and Oceans Canada (DFO) in collaboration with the Canadian Groundfish Research and Conservation Society (CGRCS), a non-profit society composed of participants in the British Columbia commercial groundfish trawl fishery. The Queen Charlotte Sound and West Coast Haida Gwaii surveys are conducted under collaborative agreements, with the CGRCS providing chartered commercial fishing vessels and field technicians, while DFO provides in-kind contributions for running the surveys including personnel and equipment. The Hecate Strait, West Coast Vancouver Island, and Strait of Georgia surveys are conducted by DFO and have typically taken place on a Canadian Coast Guard research vessel. Until 2016 this vessel was the CCGS W.E. Ricker. From 2021 onwards, this vessel was the CCGS Sir John Franklin. In years when a coast guard vessel has not been available, the Hecate Strait, West Coast Vancouver Island, and Strait of Georgia surveys have taken place on chartered industry vessels. Data from these surveys are also presented in the groundfish data synopsis report (Anderson et al. 2019).EffortThis table contains information about the survey trips and fishing events (trawl tows/sets) that are part of this survey series. Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey, and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the date, time, location, and depth that fishing took place, as well as information that can be used to calculate fishing effort (duration) and swept area. All successful fishing events are included, regardless of what was caught.CatchThis table contains the catch information from successful fishing events. Catches are identified to species or to the lowest taxonomic level possible. Most catches are weighed, but some are too small (“trace” amounts) or too large (e.g. very large Big Skate). The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location).BiologyThis table contains the available biological data for catches which were sampled. Data may include any or all of length, sex, weight, age. Different length types are measured depending on the species. Age structures are collected when possible for species where validated aging methods exist and are archived until required for an assessment; therefore, all existing structures have not been aged at this time. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.BiomassThis table contains relative biomass indices of species that have been captured in every survey of the time series. The coefficient of variation and bootstrapped 95% confidence intervals are provided for each index. The groundfish data synopsis report (Anderson et al. 2019) provides an explanation of how the relative biomass indices are derived.

This map service provides access to most of the Resource Map datasets shown on the GeoAtlas application.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. This map service is used by the GeoATLAS web application, sub-section Resource Map in the Mineral Exploration theme. It includes Base Metals Potential, Coal Potential, Gold Potential, Helium Potential, Bitumen (Oil Sands) Potential, Lithium Potential, Potash and Salt Resource Potential, Rare Earth Elements Potential and Uranium Potential schema in Production Data Warehouse. Note: Oil and Gas pools are found in the /Petroleum service.

* This dataset is updated on a daily basis. The ‘Record Modified’ date refers to the last metadata update.This dataset contains the extent of mineral claims held in Nunavut. A mineral claim is an area of Crown Land that is selected using the Nunavut Map Selection system by an individual or mineral exploration company that holds a valid licence to prospect. This grants the individual or mineral exploration company the mineral rights to the recorded area as provided for under the Nunavut Mining Regulations, SOR/2014-69. If the holder of a mineral claim wishes to produce minerals from the claim, or to hold it for more than thirty years, the holder must apply for a lease of the claim. This digital coverage provides a record and tracking mechanism for mining exploration in Nunavut.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100036000/1547749889500. Note: This is one of the four (4) datasets that describe mineral tenure in Nunavut. It includes mineral claims, mining leases, prospecting permits as well as coal exploration licences.