A geographic layer dividing Montreal into historical and analytical entities, meeting housing analysis needs. In addition, these neighborhoods are relatively homogeneous socio-economically living environments. **This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Point features showing the location of intakes and/or wellheads for drinking water systems. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. These locations are updated as more information is received and is therefore continually being updated and may or may not match the corresponding Point of Diversion locations available through the Water Rights dataset and application. This is one of three Drinking Water Sources datasets (along with the DWS - Source Areas polygons dataset, and DWS - Protection Zones polygons dataset). Note: the polygons all have unique polygon IDs used to relate them to these points.

Polygon features representing the geographical extent of a source area that contributes water to a drinking water system. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. Source Area is a broad term used to describe any area that could potentially contribute water to the drinking water system; it does not mean that hydrologic analyses have been completed to determine likelihood of connectivity. These source areas most often represent the entire aquifer extent (for ground water systems) or the watershed upstream from the intake (for surface water systems). This is one of three Drinking Water Sources datasets (along with the DWS - Intakes/Wellheads points dataset, and DWS - Protection Zones polygons dataset). Note: these polygons have unique Source Areas IDs used to relate them to the Intakes/Wellhead points.

DescriptionConservation of marine biodiversity requires understanding the joint influence of ongoing environmental change and fishing pressure. Addressing this challenge requires robust biodiversity monitoring and analyses that jointly account for potential drivers of change. Here, we ask how demersal fish biodiversity in Canadian Pacific waters has changed since 2003 and assess the degree to which these changes can be explained by environmental change and commercial fishing. Using a spatiotemporal multispecies model based on fisheries independent data, we find that species density (number of species per area) and community biomass have increased during this period. Environmental changes during this period were associated with temporal fluctuations in the biomass of species and the community as a whole. However, environmental changes were less associated with changes in species’ occurrence. Thus, the estimated increases in species density are not likely to be due to environmental change. Instead, our results are consistent with an ongoing recovery of the demersal fish community from a reduction in commercial fishing intensity from historical levels. These findings provide key insight into the drivers of biodiversity change that can inform ecosystem-based management.The layers provided represent three community metrics: 1) species density (i.e., species richness), 2) Hill-Shannon diversity, and 3) community biomass. All layers are provided at a 3 km resolution across the study domain for the period of 2003 to 2019. For each metric, we provide layers for three summary statistics: 1) the mean value in each grid cell over the temporal range, 2) the probability that the grid cell is a hotspot for that metric, and 3) the temporal coefficient of variation (i.e., standard deviation/mean) across all years.Methods:The analysis that produced these layers is presented in Thompson et al. (2022). The analysis uses data from the Groundfish Synoptic Bottom Trawl Research surveys in Queen Charlotte Sound (QCS), Hecate Strait (HS), West Coast Vancouver Island (WCVI), and West Coast Haida Gwaii (WCHG) from 2003 to 2019. Cartilaginous and bony fish species caught in DFO groundfish surveys that were present in at least 15% of all trawls over the depth range in which they were caught were included. This depth range was defined as that which included 95% of all trawls in which that species was present. The final dataset used in our analysis consisted of 57 species (Table S1 in Thompson et al. 2022).The spatiotemporal dynamics of the demersal fish community were modeled using the Hierarchical Modeling of Species Communities (HMSC) framework and package (Tikhonov et al. 2021) in R. This framework uses Bayesian inference to fit a multivariate hierarchical generalized mixed model. We modeled community dynamics using a hurdle model, which consists of two sub models: a presence-absence model and a biomass model that is conditional on presence. Our list of environmental covariates included bottom depth, bathymetric position index (BPI), mean summer tidal speed, substrate muddiness, substrate rockiness, whether the trawl was inside or outside of the ecosystem-based trawling footprint, and survey region (QCS & HS vs. WCVI & WCHG)), mean summer near-bottom temperature deviation, mean summer near-bottom dissolved oxygen deviation, mean summer cross-shore and along-shore current velocities near the seafloor, mean summer depth-integrated primary production, and local-scale commercial fishing effort.Layers are provided for three community metrics. All metrics should be interpreted as the value that would be expected in the catch from an average tow in the Groundfish Synoptic Bottom Trawl Research Surveys taken in a given 3 km grid cell. Species density (sometimes called species richness) should be interpreted as the number of the 57 species that would be caught in a trawl. Hill-Shannon diversity is a measure of diversity that gives greater weight to communities where biomass is spread equally across species. Community biomass is the total biomass across all 57 species that would be expected to be caught per square km in an average tow. Data Sources:Research data was provided by Pacific Science's Groundfish Data Unit for research surveys from the GFBio database between 2003 and 2019 that occurred in four regions: Queen Charlotte Sound, Hecate Strait, West Coast Haida Gwaii, and West Coast Vancouver Island. Our analysis excludes species that are rarely caught in the research trawls and so our estimates would not include the occurrence or biomass of these rare species.Commercial fishing data was accessed through a DFO R script detailed here: https://github.com/pbsassess/gfdata. Local scale commercial fishing effort was calculated from this data. The substrate layers were obtained from a substrate model (Gregr et al. 2021). The oceanographic layers (bottom temperature, dissolved oxygen, tidal and circulation speeds, primary production) were obtained from a hindcast simulation of the British Columbia continental margin (BCCM) model (Peña et al. 2019).Uncertainties:Species that are not well sampled by the trawl surveys may not be accurately estimated by our model. The model did not include spatiotemporal random effects, which likely underestimates spatiotemporal variability in the region. It is also important to underline covariate uncertainty and model uncertainty. The hotspot estimates provide one measure of model uncertainty/certainty.

Amalgamations of Wildlife Management Units which share similar ecological characteristics and hunter harvest patterns, and thus provide a suitable geographical framework for implementing population management strategies

This data contains the current caribou subpopulation (herd) boundaries. Herd boundaries are derived from the best available science and expert knowledge. A caribou subpopulation (herd) boundary is the area required to be managed to achieve a self-sustaining population. Subpopulation boundaries do not overlap even though some caribou subpopulations share portions of their annual range. *This dataset is the focal point of the Caribou in British Columbia - Web Application.

Summer, Winter Alpine, and Winter Forest-Dwelling habitat model for caribou in the Itcha, Ilgachuz, and Rainbow Mountains of West-Central BC. This habitat model was developed using telemetry from the Itcha-Ilgachuz, Rainbow, and Charlotte Alplands Herds. [Season] field should be used to split the data out into separate summer, winter alpine, and winter forest-dwelling habitat models. Model development is detailed in _Apps, C. D., T. A. Kinley, and J. A. Young. 2001. Multi-scale habitat modeling for woodland caribou in the Itcha, Ilgachuz, and Rainbow mountains of west-central British Columbia.Wildlife Section, Ministry of Water, Land and Air Protection, Williams Lake, British Columbia, Canada_. See also: https://catalogue.data.gov.bc.ca/dataset/caribou-habitat-model-for-the-western-cariboo-region-2017-. __Note: The 2017 habitat model covers a similar area, but does not supersede the 2001 habitat model.__

The wildlife values area and site datasets represent the consolidation of 13 wildlife data classes collected by the Ministry of Natural Resources. The data estimates locations used by wildlife for various reasons, including: * breeding * calving and fawning * denning * feeding * staging * nesting * wintering * general habitat areas * nurseries * travel corridors Locations are represented as points (site) or polygons (area) and may be related to a specific species or described more generally. Wildlife values data is most often used to support policy and legislation associated with the Crown Forest Sustainability Act. The data may also be used to inform a wide range of resource management activities and decisions. There are additional sensitive features related to provincially tracked species and species at risk that are not available as part of the open data package. Sensitive features are subject to licensing and approvals and may be requested by contacting [geospatial@ontario.ca](geospatial@ontario.ca).

The purpose of the survey is to document and record habitat types and associated algae and marine invertebrate species in a variety of habitat types. Transect locations are randomly selected throughout the study area, which rotates between the north and south coasts of British Columbia on a biannual basis. Transects are laid perpendicular to the shoreline. A team of two divers swim the transect with data sheets to collect habitat, algae and marine invertebrate data as detailed below in the methods section. Data is keypunched in an MS Access database that can be queried for species observations and environmental information.This dataset includes three tables pulled from the original database containing observations by species, observations by quadrat, and additional header information for each observation. All three tables can be linked by the field HKey. Three lookup tables are included as well, one for algae, one for invertebrates, and one for substrates.

Wildlife habitat areas (WHAs) are mapped areas that are necessary to meet the habitat requirements of an Identified Wildlife element. WHAs designate critical habitats in which activities are managed to limit their impact on the Identified Wildlife element for which the area was established. The purpose of WHAs is to conserve those habitats considered most limiting to a given Identified Wildlife element. This dataset contains proposed WHAs for the entire province except for the Omenica Region as there are none in the consultation phase at this time