The Head Tax Permit Zone is comprised of three polygons for determining which zone a head tax permit falls in. These zones are used to apply the rental rate that forest grazing reserve permits, head tax permits (HTP), and provincial grazing reserves (GRR) are charged (Ministerial Order 01/2020).

This service shows the median after-tax income of lone parent families in 2015 for Canada by 2016 census division. The data is from the data table Household Income Statistics (3) and Household Type Including Census Family Structure (11) for Private Households of Canada, Provinces and Territories, Census Divisions and Census Subdivisions, 2016 Census - 100% Data, Statistics Canada Catalogue no. 98-400-X2016099.This data pertains to households with one lone-parent census family without other persons in the household. In the context of census families, total income refers to receipts from certain sources of all of its family members, before income taxes and deductions, during a specified reference period. After-tax income refers to total income less income taxes of the statistical unit during a specified reference period. The median income of a specified group is the amount that divides the income distribution of that group into two halves. For additional information refer to the 2016 Census Dictionary for 'Total income', 'After-tax income' and 'Census family'.For additional information refer to the 2016 Census Dictionary for 'Total income', 'After-tax income' and 'Census family'.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census division” web service, accessible in the data resources section below.

This service shows the median after-tax income of lone parent families in 2015 for Canada by 2016, census subdivision. The data is from the data table Household Income Statistics (3) and Household Type Including Census Family Structure (11) for Private Households of Canada, Provinces and Territories, Census Divisions and Census Subdivisions, 2016 Census - 100% Data, Statistics Canada Catalogue no. 98-400-X2016099.This data pertains to households with one lone-parent census family without other persons in the household. In the context of census families, total income refers to receipts from certain sources of all of its family members, before income taxes and deductions, during a specified reference period. After-tax income refers to total income less income taxes of the statistical unit during a specified reference period. The median income of a specified group is the amount that divides the income distribution of that group into two halves. For additional information refer to the 2016 Census Dictionary for 'Total income', 'After-tax income' and 'Census family'.For additional information refer to the 2016 Census Dictionary for 'Total income', 'After-tax income' and 'Census family'.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census subdivision” web service, accessible in the data resources section below.

This service shows the median household after-tax income in 2015 for Canada, by 2016 census division. The data is from the Census Profile, Statistics Canada Catalogue no. 98-316-X2016001.After-tax income - refers to total income less income taxes of the statistical unit during a specified reference period (for additional information refer to Total Income – 2016 Census Dictionary and After-tax Income – 2016 Census Dictionary). The median income of a specified group is the amount that divides the income distribution of that group into two halves.Census division (CD) is the general term for provincially legislated areas (such as county, municipalité régionale de comté and regional district) or their equivalents. In other provinces and the territories where laws do not provide for such areas, Statistics Canada defines equivalent areas for statistical reporting purposes in cooperation with these provinces and territories. Census divisions are intermediate geographic areas between the province/territory level and the municipality (census subdivision).To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census division” web service, accessible in the data resources section below.Besides the variable described here, the dataset contains the id, name, type, province, population, land area and the number of private households for each census division.

This service shows the median household after-tax income in 2015 for Canada, by 2016 census subdivision. The data is from the Census Profile, Statistics Canada Catalogue no. 98-316-X2016001.After-tax income - refers to total income less income taxes of the statistical unit during a specified reference period (for additional information refer to Total Income – 2016 Census Dictionary and After-tax Income – 2016 Census Dictionary). The median income of a specified group is the amount that divides the income distribution of that group into two halves.Census subdivision (CSD) is the general term for municipalities (as determined by provincial/territorial legislation) or areas treated as municipal equivalents for statistical purposes (e.g., Indian reserves, Indian settlements and unorganized territories). Municipal status is defined by laws in effect in each province and territory in Canada.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census subdivision” web service, accessible in the data resources section below.Besides the variable described here, the dataset contains the id, name, type, province, population, land area and the number of private households for each census subdivision.If a value is null, it could be because it is not available for a specific reference period, it is not applicable, it is too unreliable to be published or it is suppressed to meet confidentiality requirements of the Statistics Act. To find out the exact reason, refer to the source data from Census in the resources below.

Location and contact information for Pacific Recreational Fishery Salmon Head Recovery Depots.The sport fishing community has an important role in the recovery of coded-wire tags found in Coho and Chinook. A coded-wire tag is a 1mm piece of wire that is laser etched with a unique number. Tags are injected into the nose cartilage of juvenile salmon prior to ocean migration. Annually, Canada and the United States tag over 50 million juvenile salmon. Fisheries and Oceans Canada applies about 5.5 million tags, using about 5.5 kilometres of wire. Anglers can recognize the presence of a coded-wire tag because of the missing adipose fin (located on the dorsal surface of the salmon). If you have caught an adipose fin clipped Coho and Chinook, it is a simple matter of removing the head from the fish, completing a sport head label and then submitting the head to a Sport Head Recovery Depot in the area. It is just as important to turn in heads from terminal or freshwater sites as it is from marine areas. Even though anglers fishing close to hatcheries can be fairly certain of the origin of their catch, data will not be recorded unless the heads from fin-clipped recoveries are turned in. Without the data, the health of the stock and the value of the resource to anglers could be underestimated.

Boundary geometry and summary assessment data for all of the assessed property within the Province of Manitoba. Please visit the Manitoba Property Assessment website for more information www.gov.mb.ca/assessmentBoundary geometry for all of the assessed property within the Province of Manitoba. Please visit the Manitoba Property Assessment website for more information www.gov.mb.ca/assessment. The purpose is to provide end users with a digital map of Manitoba's property assessment boundaries and summary assessment data. This data layer is suitable for GIS georeferencing. The Manitoba Property Assessment Information data reflects the most current mapping data available and was originally uploaded to Manitoba Maps as a feature layer on December 23, 2016. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated ROLL_NO: Identify property within a municipality ROLL_NO_TXT: Identify property within a municipality. Formatted with 3 decimals PROPERTY_ADDRESS: Civic address if the property has one. Otherwise short legal description-section/township/range or plan MUNI_NO: Manitoba municipality identifier number MUNICIPALITY: Manitoba municipality identifier number and legal name of municipality MUNI_NAME_WITH_TYP: Name of municipality suitable for alphabetical list including type ASMT_ROLL: Tax year and assessment roll version (Preliminary, Final, Tax) DWELLING_UNITS: Number of dwelling units on the property FRONTAGE_OR_AREA: size of property in either acres or feet of frontage TOTAL_VALUE: Assessed value of property as of tax year and assessment roll version

This dataset identifies potential low head hydropower development sites across Canada, based on a comprehensive review of existing studies and resource databases. Low head hydropower refers to sites where the vertical drop (head) is 15 meters or less. Sites included in this dataset also have an estimated generation capacity of 50 megawatts (MW) or less.The original database was developed by Hatch Ltd. for Natural Resources Canada (NRCan) as part of a national low head hydropower market assessment. It integrates data from multiple sources, including provincial inventories, prior Hatch studies, and legacy fieldwork records. To enhance data completeness, NRCan subsequently revised the database by supplementing missing site names, river names, and geographic coordinates where possible.The finalized dataset comprises 2,629 potential low head hydropower sites distributed across Canada. It is provided in the form of provincial and territorial shapefiles, each containing detailed site-level attributes. Attributes include site name, river name, site ID, source of information, local map number, geographic coordinates (X and Y), site region, presence of a dam, grid connection status, Indigenous affiliation, catchment area, mean annual flow, rated discharge, gross head, penstock length and diameter, estimated installed capacity, dedicated transmission line length, site comments, and Indigenous reserve name.Disclaimer:This dataset was developed to support preliminary assessments of low head hydropower potential in Canada and is subject to the following limitations:• The original database was compiled from various secondary sources, including data provided by third-party contributors and Hatch Ltd.’s own records. Some of these sources date back several decades. The data provided has not necessarily undergone independent verification for its accuracy, completeness, or validity.• NRCan undertook a data revision process involving manual review and geolocation using publicly available mapping tools (e.g., Google Maps) to address missing information. Where geographic coordinates could not be reliably determined, this is explicitly indicated in the dataset.• Site conditions may have changed over time due to natural processes or human activities. NRCan does not accept responsibility for any impact such changes may have on the accuracy or validity of the dataset’s observations, conclusions, or recommendations.• The inclusion of a site in this dataset does not imply technical, economic, or environmental feasibility. Any potential development would require further investigation, including detailed field studies, environmental assessments, and comprehensive technical and financial evaluations.This dataset is provided for informational purposes only and is not intended to serve as the sole basis for investment, planning, or development decisions. Users are strongly advised to undertake independent due diligence, including site-specific assessments and technical evaluations, prior to making any decisions based on the dataset.By accessing or using this dataset, users acknowledge and accept these terms and limitations. The dataset providers expressly disclaim any responsibility or liability for consequences resulting from the use, interpretation, or reliance on the information contained herein. Use of this dataset is entirely at the user’s own risk, and users assume full responsibility for any actions or decisions made based on its contents.This disclaimer is provided in accordance with applicable laws and regulations. By utilizing the dataset, users agree to release the dataset providers from any legal claims, damages, or liabilities that may arise from such use.

Data set covers metrics and metadata related to wild collected copepods Calanus spp. (C. hyperboreus, C. glacialis, C. finmarchicus) and Metridia longa: - body size in prosome length [PL]- dry weight [DW]- lipid content (oil sac area [OSA] and oil sac volume [OSV])Spatial coverage: North Atlantic sampling sites- Scotian Shelf (SS)- Gulf of Saint Lawrence (GSL)- Gulf of Maine-Georges Bank-Nantucket Shoals (GoM)- Newfoundland shelf (NFL)Cite this data as: Helenius LK, Head EJH, Jekielek P, Orphanides CD, Pepin P, Plourde S, Ringuette M, Walsh HJ, Runge JA, Johnson CL. Calanus spp. size and lipid content metrics in North Atlantic, 1977-2019. Published September 2022. Ocean Ecosystem Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/72e6d3a1-06e7-4f41-acec-e0f1474b555b

This dataset contains miscellaneous point features including: * mine head frames * cadastral iron bar (a type of survey monument) * historical monuments * horizontal control monuments * mile posts * smoke stacks We are no longer updating this data. It is best suited for historical research and analysis.