Hillshade created from the Swift Current LiDAR Project 2009 – DEM. The hillshade provides a 3 D effect for the landscape covered by this project.

Canada Base Map Elevation (CBME) consists of a simple light hillshade for use as a background for mapping application. The Canada Atlas Lambert (EPSG:3978) is used and only covers the extents of Canada.

The AAFC Infrastructure Flood Mapping in Saskatchewan 1 meter Bare Earth Hillshade is are the bare earth hillshades created at a 1 m interval for the capture area of Saskatchewan. The bare earth hillshade images were derived from the bare earth DEM. The hillshades were created using a 315 degree sun azimuth and 45 degree sun angle.

The AAFC Infrastructure Flood Mapping in Saskatchewan 1 meter Full Feature Hillshade is are the full feature hillshades created at a 1 m interval for the capture area of Saskatchewan. The full feature hillshade images were derived from the full feature DEM. The hillshades were created using a 315 degree sun azimuth and 45 degree sun angle.

The lithogeochemical data provides the chemical composition of rock samples. This data helps characterize the rocks and can be used to understand their mode of formation.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

FCOVER corresponds to the amount of the ground surface that is covered by vegetation, including the understory, when viewed vertically (from nadir). FCOVER is an indicator of the spatial extent of vegetation independent of land cover class. It is a dimensionless quantity that varies from 0 to 1, and as an intrinsic property of the canopy, is not dependent on satellite observation conditions. This product consists of a national scale coverage (Canada) of monthly maps of FCOVER indicator during a growing season (May-June-July-August-September) at 20m resolution.References:L. Brown, R. Fernandes, N. Djamai, C. Meier, N. Gobron, H. Morris, C. Canisius, G. Bai, C. Lerebourg, C. Lanconelli, M. Clerici, J. Dash. Validation of baseline and modified Sentinel-2 Level 2 Prototype Processor leaf area index retrievals over the United States IISPRS J. Photogramm. Remote Sens., 175 (2021), pp. 71-87, https://doi.org/10.1016/j.isprsjprs.2021.02.020. https://www.sciencedirect.com/science/article/pii/S0924271621000617Richard Fernandes, Luke Brown, Francis Canisius, Jadu Dash, Liming He, Gang Hong, Lucy Huang, Nhu Quynh Le, Camryn MacDougall, Courtney Meier, Patrick Osei Darko, Hemit Shah, Lynsay Spafford, Lixin Sun, 2023.Validation of Simplified Level 2 Prototype Processor Sentinel-2 fraction of canopy cover, fraction of absorbed photosynthetically active radiation and leaf area index products over North American forests,Remote Sensing of Environment, Volume 293, https://doi.org/10.1016/j.rse.2023.113600.https://www.sciencedirect.com/science/article/pii/S0034425723001517

This Shaded Relief Image has a resolution of 500 meters and was derived from the United States Geological Survey "30 Arc-second Digital Elevation Model".Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This Shaded Relief Image has a resolution of 300 meters and was derived from the "Yukon 90m Shaded Relief" from Environment Yukon, the "Canada 3D" elevation model from Natural Resources Canada, and the United States Geological Survey "1:250k DEM of Alaska".Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

One meter hillshade generated from full feature DEM.LiDAR Services International (LSI), a Calgary-based LiDAR company completed an airborne LiDAR survey for the Redberry Lake Biosphere Reserve (RLBR) and Agriculture and Agri-Foods Canada (AAFC) in October 2011. The project involved collection of LiDAR data for a 362.97 km2 block area, 252.77 km2 for Redberry Lake and 110.20 km2 for AAFC northwest of Saskatoon, SK.