This polygon layer depicts sub-basin average observed precipitation from the High Resolution Deterministic Precipitation Analysis (HRDPA). Offers insight into how much rain/snow actually fell across each watershed in the past observation period. Observation periods we are interested are for past 1 day, 3 days and 7 days.HRDPA is ECCC’s high-resolution precipitation analysis, merging gauge, radar, and HRDPS model data. This layer aggregates the final (or preliminary) HRDPA accumulations to sub-basin polygons. Each record indicates the average precipitation that truly occurred over each watershed, vital for verifying model forecasts, calibrating hydrological models, and conducting post-event analyses of flood or drought severity.

The Canadian Precipitation Analysis System (CaPA) produces a best estimate of 6 and 24 hour precipitation amounts. This objective estimate integrates data from in situ precipitation gauge measurements, radar QPEs and a trial field generated by a numerical weather prediction system. In order to produce the High Resolution Deterministic Precipitation Analysis (HRDPA) at a resolution of 2.5 km, CaPA is connected to the continental HRDPS for its trial field. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analysis valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

This polygon layer visualizes actual observed precipitation polygons (classed by amounts) from the HRDPA product, offering a clear map-based depiction of recent rainfall or snowfall distribution. Observation periods depicted are past 1 day, past 3 days and past 7 days.This polygon layer is generated by taking HRDPA’s gridded precipitation data (6h, 24h, or multi-day accumulations) and grouping them into precipitation ranges, then polygonizing. Each feature shows how much precipitation truly fell in that zone. This is essential for event verification against forecasts, analyzing localized extremes, and updating water resource or flood models with real observed input.

The Canadian Precipitation Analysis System (CaPA) produces a best estimate of 6 and 24 hour precipitation amounts. This objective estimate integrates data from in situ precipitation gauge measurements, radar QPEs and a trial field generated by a numerical weather prediction system. In order to produce the High Resolution Deterministic Precipitation Analysis (HRDPA) at a resolution of 2.5 km, CaPA is connected to the continental HRDPS for its trial field. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analyses valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

This WebMap comprises of three layers , namely, HRDPA Observed Accumulated Precipitation - Past 1 day, 3 days and 7 days (feature layer) ; HRDPA SubBasin Precipitation Distribution - Past 1 day, 3 day, and 7 days (feature layer) and Supporting Layers (group layer) - Comprising of Main Cities, Nelson River Basin and Basin Boundaries (feature layers).HRDPA is ECCC’s high-resolution precipitation analysis, merging gauge, radar, and HRDPS model data. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analysis valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

This WebMap comprises of three layers , namely, HRDPA Observed Accumulated Precipitation - Past 1 day, 3 days and 7 days (feature layer) ; HRDPA SubBasin Precipitation Distribution - Past 1 day, 3 day, and 7 days (feature layer) and Supporting Layers (group layer) - Comprising of Main Cities, Nelson River Basin and Basin Boundaries (feature layers).HRDPA is ECCC’s high-resolution precipitation analysis, merging gauge, radar, and HRDPS model data. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analysis valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

The HealthLink BC Mental Health and Substance Use (MHSU) data set includes the following: Programs that offer early intervention, transitional care or other services that supplement and facilitate primary and adjunctive therapies; which offer community mental health education programs; or which link people who are in need of treatment with appropriate providers. Programs that provide preventive, diagnostic and treatment services in a variety of community and hospital-based settings to help people achieve, maintain and enhance a state of emotional well-being, personal empowerment and the skills to cope with everyday demands without excessive stress or reliance on alcohol or other drugs. Treatment may include emotional support, introspection and problem-solving assistance using a variety of modalities and approaches, and medication, as needed, for individuals who have a substance use disorder involving alcohol and/or other drugs or for people who range from experiencing difficult life transitions or problems in coping with daily living to those with severe, chronic mental illnesses that seriously impact their lives. Multidisciplinary programs, often offered on an inpatient basis with post-discharge outpatient therapy, that provide comprehensive diagnostic and treatment services for individuals who have anorexia nervosa, binge-eating disorder, bulimia or a related eating disorder. Treatment depends on the specific type of eating disorder involved but typically involves psychotherapy, nutrition education, family counseling, medication and hospitalization, if required, to stabilize the patient's health. Alliance of Information & Referral Systems (AIRS) / 211 LA County taxonomy is the data classification used for all HealthLink BC directory data, including this MHSU data set (https://www.airs.org/i4a/pages/index.cfm?pageid=1). AIRS taxonomy and data definitions are protected by Copyright by Information and Referral Federal of Los Angeles County, Inc (https://211taxonomy.org/subscriptions/#agreement)

The Homogenized Surface Pressure data consist of monthly, seasonal and annual means of hourly sea level and station pressure (hectopascals) for 626 locations in Canada. Homogenized climate data incorporate adjustments (derived from statistical procedures) to the original station data to account for discontinuities from non-climatic factors, such as instrument changes or station relocation. The time periods of the data vary by location, with the oldest data available from 1953 at some stations to the most recent update in 2014. Data availability over most of the Canadian Arctic is restricted to 1953 to present. The data will continue to be updated every few years (as time permits).

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

Feature point layer of the 124 licensed personal care homes (PCHs) in Manitoba.This is a feature point layer of the 124 licensed personal care homes (PCHs) in Manitoba. All licensed PCHs in Manitoba are required to comply with minimum standards of care as set out in the Personal Care Home Standards Regulation under the Health Services Insurance Act. The Licensing and Compliance Branch of Manitoba Health Seniors and Active Living monitors compliance through regular review processes. PCH operators are required to take the necessary steps to address concerns identified in the course of reviews within specified time lines and must provide status updates until concerns have been addressed. PCH licences are reviewed and renewed annually and review findings are used to inform decision-making.  The dataset includes the following fields (Alias (Name): Description)  Regional Health Authority (Regional_Health_Authority): The name of the Regional Health Authority in which the facility is located.  Community (Community): The name of the community in which the facility is located.  Facility (Facility): The name of the licensed personal care home.  Facility Key (Facility_Key): Primary key used to query records in the Summary Reviews table.  Facility Label (Facility_Label): An abbreviated facility name suitable for use as a label in a map.  Address (Address): The street address of the facility.  Postal Code (Postal_Code): The postal code for the facility.  Phone Number (Phone_Number): The phone number for the facility.  Proprietary Status (Proprietary_Status): Refers to the ownership of the facility, either Proprietary or Non-proprietary.  Language (Language): The designated language of the facility, either English or Bilingual.  Bed (Beds): The number of beds in the facility.  Status of Licence (Status_of_Licence): The status of the facility’s license. Possible values are Unencumbered, Under Review, or With Conditions.  Owner/Operator (Owner_Operator): The individual or company that owns the facility.  Website (Website): The URL for the website of the facility.  Latitude (Latitude): The latitudinal coordinate in decimal degrees.  Longitude (Longitude): The longitudinal coordinate in decimal degrees. This feature point layer forms part of the data for the Manitoba Personal Care Home Reporting app.