Deep water (> 200 m) dissolved oxygen interpolated on a grid cell of 10 km x10 km in the Estuary and Gulf of St. Lawrence. Input data are from the annual August multidisciplinary survey hold in 2014 to 2023.PurposeSince 1990, the Department of Fisheries and Oceans has been conducting an annual multidisciplinary survey in the Estuary and northern Gulf of St. Lawrence using a standardized protocol. These surveys are an important source of information about the status of the marine ressources. The objectives of the survey are multiple: to estimate the abundance and biomass of groundfish and invertebrates, to identify the spatial distribution and biological characteristics of these species, to monitor the biodiversity of the Estuary and the northern Gulf and finally, to describe the environmental conditions observed in August in the sampling area.Annual reports are available at the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Bourdages, H., Brassard, C., Desgagnés, M., Galbraith, P., Gauthier, J., Légaré, B., Nozères, C. and Parent, E. 2017. Preliminary results from the groundfish and shrimp multidisciplinary survey in August 2016 in the Estuary and northern Gulf of St. Lawrence. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/002. v + 87 p.Supplemental InformationThe bottom dissolved oxygen is determined from a CTD profile in the water column according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

In permafrost dominated regions, a gap persists in our understanding of water resources, the influence of groundwater, and the impact of climate change at the regional scale. Regional scale modelling can help to advance the understanding of these impacts by integrating with regional climate models. For regional modelling to be tenable, ongoing development of modelling methods and conceptualizations is required. By developing a fully integrated numerical groundwater-surface water climate model using HydroGeoSphere (HGS) (Aquanty 2021) for a gauged basin within the discontinuous permafrost zone, this dataset allows the verification of existing numerical methods and the testing of various conceptualizations of integrated groundwater-surface water flow in permafrost regions at the regional scale. This work informs future modelling and forecasting of regional water resources in permafrost regimes.

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

In 2008 Exploration Syndicate Inc. contracted Geotech Inc. to fly a regional-scale ZTEM survey covering a 25,000 km2 area (1 km line spacing) in the Selwyn basin. The survey footprint straddles the Canol Road in east-central Yukon and overlaps into the western Northwest Territories.In March 2013 Yukon Geological Survey purchased the survey data, and in May we received approval to distribute the data publicly. As no interpretation was included with the purchase of the data, Condor Consulting Inc. offered to process the data and generate maps, gridded data, and a report. Condor undertook the work at no charge, and their contribution to the project is gratefully acknowledged.This Miscellaneous Report comprises a number of parts: - original survey report produced by Geotech Ltd. describing the data acquisition and processing parameters;- raw survey data acquired from Exploration Syndicate Inc.;- a report summarizing the processing and interpretation undertaken by Condor Consulting;- a series of maps in pdf and tiff formats; and - gridded data.File sizes are large. If you experience problems downloading any of the products or would like to obtain the raw data, Geotech data, Multiplots, or any of the other files please contact us at geology@gov.yk.ca.The project was funded by the Canadian Northern Economic Development Agency (CanNor) through their Strategic Investments in Northern Economic Development program.

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**