Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

Polygon features showing various zones of protection around drinking water system intakes/wellheads. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. Zone of protection is a broad term that represents a wide variety of areas as they have been delineated in their corresponding report. The methods and processes used to delineate these zones vary based on several factors including, but not limited to, population, vulnerability, hydrologic/hydrogeologic parameters, etc. For the use of this dataset, the term Protection Zone means that protection measures should be considered and/or implemented in these areas due to the importance of these areas supplying drinking water to their water system users. Protection Zone does not mean that protection measures have been implemented in these areas, nor that protection measures are not required beyond the boundary of these areas. This is one of three Drinking Water Sources datasets (along with the DWS - Intakes/Wellheads points dataset, and DWS - Source Areas polygons dataset). Note: these polygons have unique Protection Zone IDs used to relate them to the Intakes/Wellhead points.

Watercourses are line features - natural or manmade - that represent the location of flowing surface water. This product requires the use of geographic information system (GIS) software.

The STAC API for NRCan's Earth Observation Database Management System (EODMS)..**This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

A measure of the intrinsic susceptibility of an aquifer representing the tendency or likelihood for contaminants to reach a specified position in the groundwater system after introduction at some location above the uppermost aquifer. The method used to create the dataset is described in the metadata associated with the dataset. The dataset is a general assessment of the vulnerability of the hydrogeological unit considered as a whole. It features the local and regional qualifiers in a controlled vocabulary list referring to the extent where the vulnerability value is valid. Because the vulnerability is assessed using contextual indices linked to the regional hydrogeological settings, it is very unlikely to have an homogeneous range of data throughout the various hydrogeologic units across the country for this dataset. Hence, the vulnerability dataset will not qualify as an homogeneous dataset. A more generic reclassification using for examples three vulnerability classes could then be used to solve this problem. Each sub layers used to create the global vulnerability index can be provided along with the final vulnerability index map.

In permafrost dominated regions, a gap persists in our understanding of water resources, the influence of groundwater, and the impact of climate change at the regional scale. Regional scale modelling can help to advance the understanding of these impacts by integrating with regional climate models. For regional modelling to be tenable, ongoing development of modelling methods and conceptualizations is required. By developing a fully integrated numerical groundwater-surface water climate model using HydroGeoSphere (HGS) (Aquanty 2021) for a gauged basin within the discontinuous permafrost zone, this dataset allows the verification of existing numerical methods and the testing of various conceptualizations of integrated groundwater-surface water flow in permafrost regions at the regional scale. This work informs future modelling and forecasting of regional water resources in permafrost regimes.

This polygon layer represents accumulated precipitation forecasts from the Global Forecast System (GFS), a global numerical weather prediction model operated by NOAA/NCEP. It provides global medium‑range precipitation forecasts, as a 168‑hour (7‑day) accumulation, to support a wide range of weather and hydrological applications.This polygon layer is generated by extracting the accumulated precipitation field from Global Forecast System (GFS) GRIB2 files. The raw data are converted into a TIF raster, then resampled, smoothed, and classified into discrete precipitation ranges. The resulting polygon features depict forecasted precipitation accumulations over a 7‑day (168‑hour) period, allowing users to monitor expected rainfall and snowfall patterns on a global scale.

This theme includes the drainage areas of various watercourse monitoring stations (physicochemical and bacteriological, benthic organisms, diatoms, pesticides, etc.) carried out by the Ministry of the Environment, the Fight against Climate Change, Wildlife and Parks (MELCCFP) as well as lake catchments (MELCCFP) as well as lake catchments including the majority of lakes in the Voluntary Lake Monitoring Network (RSVL).The drainage area and the watershed represent the territory whose water flows to the sampling station or to the outlet of the lake. Boundaries are generated using a geographic information system (GIS) from topographic maps, numerical elevation models and flow models, and watershed boundaries produced by the Main Directorate of Water Expertise (DPEH).The drainage area and watershed are used to calculate the area drained upstream of the sampling station or lake, to characterize the drained territory (for example, to determine land use), and to meet specific mapping needs. The linked tables also provide compilations of land use according to three classifications to contextualize the various monitoring carried out at the stations. Note that the use of land outside Quebec, drainage areas and transboundary watersheds is not calculated and that the percentages in each category correspond to the Quebec area only.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Well capture zones are intended to identify potential areas of risk to aquifers where the release of contaminants could affect the water quality of community wells. The information was compiled as a discreet project under the 'Yukon Water Strategy' and represents a 'snapshot in time' of the Drinking Water Systems. Well capture zones were identified using a combination of buffers, analytical methods, and groundwater flow modelling using the Waterloo Hydrogeologic Inc. Visual MODFLOW.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)