In the hydrogeological unit, quantity of water that replenishes groundwater beneath the water table, expressed in mm/yr. Recharge is usually calculated using hydrology balance, integrating information from precipitation, hydrology data, drainage, soil properties, evapotranspiration, etc. The result is a raster dataset in which each cell has a given value for the recharge of the aquifer. It can be calculate using HELP software, developed by the US EPA. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset represent a raster in which each cell has a mean value describing the global annual recharge of the hydrogeological unit.

Watershed boundary delineated for Canada-BC hydrometric stations. Currently, watersheds were delineated using 1:50,000 scale boundaries in 1996, and many watersheds encompass entire drainages, instead of just the upstream watersheds. Note - Not yet available, but we are in the process of generating BC hydrometric station upstream watersheds using updated base data, using the following method: Within BC, watershed boundaries are based on the 1:20,000-scale Freshwater Atlas fundamental watersheds, and trimmed using the BC TRIM DEM used to approximate the height-of-land at the station locations. Outside of BC, but within Canada, watershed boundaries were approximated using Canada CDED DEM data for delineation (no "stream burning" was used) and some manual editing of boundaries was done to approximately match hydrology data after the fact. Within U.S.A., the USGS Watershed Boundary Dataset was used (at the best scale available for each drainage) to delineate the watershed boundary, with the watershed trimmed using the USGS National Elevation Dataset to approximate the height-of-land when necessary.

Zones of homogeneous low flow characteristics

Zones that represent areas of homogeneous hydrologic and geomorphological characteristics

The Waterbodies dataset is comprised of area features: lakes, intermittent waterbodies, islands, and rivers wide enough to be represented as an area feature (e.g. St. Lawrence River, Mackenzie River). In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some area features have been subdivided and several types of virtual linear features serve to separate them. Features in this dataset are linked (by an attribute) to their corresponding flow line in the Drainage Network Skeleton. Therefore the Waterbodies dataset may be used in conjunction with the Drainage Network Skeleton for analytical applications. The Islands dataset is comprised of area and linear features: islands within inland waters and the waterbodies and single line rivers within these islands. Oceanic islands are not included as they are part of the coastline component of the Drainage Network Skeleton dataset. The Islands dataset exists to complete the cartographic representation of Canadian hydrology. The Islands dataset is not logically connected with the Drainage Network Skeleton, and can not be used for analytical applications. It should be noted that flow lines of the Drainage Network Skeleton do not take into account of the existence of islands and therefore do not necessarily flow around them. In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some islands themselves contain waterbodies and rivers, not significant for network analysis. However, in order to support a complete cartographic representation such waterbodies and rivers have been added to the Islands dataset. The National Scale Frameworks Hydrology data consists of area, linear and point geospatial and attribute data for Canada's hydrology at a national scale. It provides a representation of Canada's surface water features, and data completeness reflects the content of the source, the original Vector Map level 0 (VMAP0) revision 4 hydrographic layers, except where revision editing has been performed. Key value-added characteristics include river flow direction, connectivity and the tagging of geographical name keys to selected rivers, lakes and islands included in the Concise Gazetteer of Canada.The Atlas Frameworks are a set of integrated base map layers which form part of a larger National Scale Frameworks data collection. These data have been compiled at a scale of 1:1 000 000 with the primary goal being to indicate correct relative positioning with other framework layers rather than absolute positional accuracy.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Polygon features represent developed ground water aquifers in BC (that have been mapped). Most aquifer boundaries are delineated based on geology, hydrology and topographic information. Some aquifer boundaries stop at the border of BC mapsheet boundaries due to resource or data constraints at the time of mapping.

The Baseline hydrology statistics (stream flow regime) in the Southwestern Hudson Bay and Nelson River watershed systems were produced for the Water Survey of Canada's HYDAT database. These baseline statistics provide information on the water quantity at each Water Survey Canada gauge location . They also provide a summary at a primary watershed scale. This data helps address the previous data gaps in the Far North region. Applications include: * land use planning * integrated watershed management * climate change studies * hydropower studies

The “Terrestrial Ecoprovinces of Canada” dataset provides representations of ecoprovinces. An ecoprovince is a subdivision of an ecozone and is characterized by major assemblages of structural or surface forms, faunal realms, and vegetation, hydrology, soil, and macro climate. For example, the Newfoundland ecoprovince (no. 6.4) is one of six ecoprovinces within the Boreal Shield Ecozone

Ontario Integrated Hydrology (OIH) data is used to generate watersheds and support provincial-scale hydrology applications including: * watershed generation * hydrologic modelling * watercourse network analysis Four key datasets are represented in each data package: * stream network (Enhanced Watercourse) * hydrology-enforced digital elevation model [DEM ] (Enforced DEM) * flow direction grid (Enhanced Flow Direction - EFDIR) * raster representation of the stream network (StreamGrid) __Technical information__ For the first time, OIH data is complete for the entire province making it possible to create a watershed for any location in Ontario. This includes areas flowing in from neighbouring provinces and Minnesota with the following exceptions: * points on the international border that drain to Lake Superior, south of Pigeon River * points on the international border that drain the Great Lakes connecting channels and St. Lawrence River stateside * points along the Ottawa River that drain from Quebec __Special note: North West package__ The North West package contains hydrography data for the entire Rainy River Basin, an area which straddles the international border between Canada and the United States. The data stateside originates from the National Hydrography Dataset (NHD) as of February/March 2014. This data has been harmonized with the Ontario Hydro Network (OHN) to create the Enhanced Watercourse and Integrated Waterbody layers found within the North West package. For more information on when the data was initially extracted and incorporated, refer to these fields stored in the attribute table of each vector layer in the geodatabase: * Effective Date (EFF_DATE) * Geometry Update Date (GEO_UPD_DT) The data stateside is a static snapshot of NHD intended to support regional modeling. Please refer to the [United States Geological Survey (USGS)](https://www.usgs.gov/core-science-systems/ngp/national-hydrography) website for the most current version of NHD. Data is updated after the completion of major updates to source data (such as OHN and/or the Provincial DEM).

Features in the Hydrology - Line layer are representations of creeks, streams, and rivers for the City of Whitehorse.Data was modeled using the NENA NG9-1-1 GIS Data Template (NENA-REF-006. 2 -202 2 ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)