Hypsometry polygons captured at 1:1,000,000 scale from Digital Chart of the World data for the Yukon and surrounding area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 3 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead and cadmium and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 3 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 3 substances and water pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

The blue shark (Prionace glauca), is a species found in Atlantic Canadian waters which is commonly encountered in commercial and recreational fisheries. Pop-up Satellite Archival Tags (PSAT) and Smart Position and Temperature tag (SPOT) from Wildlife Computers were applied to blue sharks from 2004 to 2008 to collect data on depth (pressure), temperature and ambient light level (for position estimation). Deployments were conducted in Canada on commercial and recreational vessels from mid-August to early October, but mostly in September. A variety of tag models were deployed: PAT 4 (n=16), Mk10 (N=28), and SPOT3 (N=2) and 39 of 46 tags reported. The blue sharks tagged ranged in size from 124 cm to 251 cm Fork Length (curved); 30 were female, 15 were male and 1 was unknown sex. Time at liberty ranged from 4 – 210 days and 16 tags remained on for the programmed duration. Raw data transmitted from the PSAT’s after release was processed through Wildlife Computers software (GPE3) to get summary files, assuming a maximum swimming speed of 2m/s, NOAA OI SST V2 High Resolution data set for SST reference and ETOPO1-Bedrock dataset for bathymetry reference. The maximum likelihood position estimates are available in .csv and .kmz format and depth and temperature profiles are also in .csv format. Other tag outputs as well as metadata from the deployments can be obtained upon request from: warren.joyce@dfo-mpo.gc.ca or heather.bowlby@dfo-mpo.gc.ca.

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice.Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.

Get data on Lake Ontario tagged Atlantic salmon recaptures. This dataset represents tagged adult Atlantic salmon that were released and then recaptured by anglers. These fish were used as brood stock (breeding) in the Ministry of Natural Resources and Forestry’s fish culture program. All fish were tagged with a streamer tag near the dorsal fin. Each tag has a unique number and a phone number so anglers can call and let the ministry know about their catch. The data includes: * tagging date * recapture date * tag number/colour * location released * location recaptured * days since released * distance travelled

The Ontario Hydro Network (OHN) is a provincial medium scale originating from data with regional scales of 1: 10,000 in Southern Ontario, 1: 20,000 in Northern Ontario and 1: 50,000 in the Far North. The shoreline is taken from the OHN - Waterbody data class. This data is used for cartographic purposes and web mapping services. This product requires the use of geographic information system (GIS) software. [Ontario Hydro Network (OHN) User Guide (Word)](https://www.sdc.gov.on.ca/sites/MNRF-PublicDocs/EN/CMID/OHN%20-%20UserGuide.docx)

The Elk Valley Area Based Management Plan (ABMP) - “Elk Valley Water Quality Plan” was developed according to Ministerial Order No. 113 to remediate water quality effects of past coal mining and to guide future development. The Elk Valley Water Quality Plan was developed by Teck with input from the public, First Nations, governments, technical experts and other stakeholders. The purpose of the Plan is to identify a strategy and implement solutions to address increasing selenium and nitrate water concentrations within the Valley, and assess and track levels of cadmium and sulphate in waters; while at the same time allowing for continued sustainable mining in the Valley. The Plan also lays out a strategy to address calcite formation associated with historical and current mining activity. The Plan was submitted to the British Columbia Minister of Environment for approval on July 22, 2014. The ministry amended the Elk Valley ABMP in 2025. More information can be found at https://elkvalleywaterquality.gov.bc.ca/.

Features in the Hydrology - Polygon layer are representations of waterbodies for the City of Whitehorse.Data was modeled using the NENA NG9-1-1 GIS Data Template (NENA-REF-006. 2 -202 2 ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)