Mascot geodetic control monuments for BC. Geodetic Control Monuments are a network of interconnected markers in the ground which have accurately determined coordinates, and/or elevations. They are fixed points on which to spatially reference surveys, mapping, aerial and satellite imaging, etc

As part of the development of a nationally-consistent sampling design within the Aquaculture Monitoring Program (AMP), this data reports mesozooplankton assemblages observed at nine coastal shellfish aquaculture sites, located across four DFO regions, with sampling across months, tide phases, and sampling locations. In most sites, strong spatial effects were observed, while tide effects were generally less important for structuring the mesozooplankton communities. Seasonality emerged as an essential factor to design an efficient monitoring program. This dataset represents the first large-scale Canadian coastal study using imaging technology for plankton taxonomic Identification.Cite this data as: Finnis, S., Guyondet, T., McKindsey, C.W., Arseneau, J., Barrell, J., Duhaime, J., Filgueira, R., Gallardi, D., Gaspard, D., Gibb, O., Goodwin, C., Hua, K., Macdonald, T., Milne, R., Lacoursière-Roussel, A. 2023. Guidance on sampling effort to monitor mesozooplankton communities at Canadian bivalve aquaculture sites using an optical imaging system. Can. Tech. Rep. Fish. Aquat. Sci. 3581: vii + 101 p

The Shore Unit Classifications Lines depict the most current Shorezone mapping lines for the Province of British Columbia. Shorezone is an aerial imaging, habitat classification, and mapping system used to inventory alongshore and across-shore geomorphological and biological attributes of the coast. Habitat attributes are interpreted from oblique aerial imagery acquired during the lowest tides of the year.

This dataset was developed to document the procedures for acquiring underwater images in the Banc-des-Américains Marine Protected Area (MPA). Its primary objective is to provide a comprehensive inventory of metadata linked to imagery campaigns that allowed us to conduct a basic characterization of the area, and now that are used for ecological monitoring of the benthic habitats within the MPA.Metadata were collected during imagery surveys conducted since 2012, using three main methods: drop cameras on the crest, baited drop stereoscopic cameras on both the crest and plains, and towed cameras on the plains. For each operation are shared the type of gear used, sampling method, date, geographic coordinates, and acquisition depth.The released dataset contains only descriptive information related to the acquisition of images : file identifier, location, sampling methodology, depth, and technical imaging parameters. It does not include image files themselves, visual content, or the results of image analyses.A systematic quality control is applied to ensure completeness and consistency of the metadata: field format standardization, validation of GPS coordinates, verification of dates and recorded depths. Clear instructions guide the recording of metadata to guarantee their reliability for management and scientific monitoring purposes.

The Shore Unit Classifications Polygons depict the most current areas of Shorezone mapping for the Province of British Columbia. Shorezone is an aerial imaging, habitat classification, and mapping system used to inventory alongshore and across-shore geomorphological and biological attributes of the coast. Habitat attributes are interpreted from oblique aerial imagery acquired during the lowest tides of the year. The mapping project was first developed as an oil spill response tool for British Columbia, and now ShoreZone extends from Oregon to Alaska and has many other uses including ecological studies, marine conservation planning, coastal flooding and vulnerability assessments, and community education.

Vertical seismic profiling (VSP) surveys done by the Geological Survey of Canada for research into downhole seismic imaging techniques for mineral exploration.

FCOVER corresponds to the amount of the ground surface that is covered by vegetation, including the understory, when viewed vertically (from nadir). FCOVER is an indicator of the spatial extent of vegetation independent of land cover class. It is a dimensionless quantity that varies from 0 to 1, and as an intrinsic property of the canopy, is not dependent on satellite observation conditions. This product consists of a national scale coverage (Canada) of monthly maps of FCOVER indicator during a growing season (May-June-July-August-September) at 20m resolution.References:L. Brown, R. Fernandes, N. Djamai, C. Meier, N. Gobron, H. Morris, C. Canisius, G. Bai, C. Lerebourg, C. Lanconelli, M. Clerici, J. Dash. Validation of baseline and modified Sentinel-2 Level 2 Prototype Processor leaf area index retrievals over the United States IISPRS J. Photogramm. Remote Sens., 175 (2021), pp. 71-87, https://doi.org/10.1016/j.isprsjprs.2021.02.020. https://www.sciencedirect.com/science/article/pii/S0924271621000617Richard Fernandes, Luke Brown, Francis Canisius, Jadu Dash, Liming He, Gang Hong, Lucy Huang, Nhu Quynh Le, Camryn MacDougall, Courtney Meier, Patrick Osei Darko, Hemit Shah, Lynsay Spafford, Lixin Sun, 2023.Validation of Simplified Level 2 Prototype Processor Sentinel-2 fraction of canopy cover, fraction of absorbed photosynthetically active radiation and leaf area index products over North American forests,Remote Sensing of Environment, Volume 293, https://doi.org/10.1016/j.rse.2023.113600.https://www.sciencedirect.com/science/article/pii/S0034425723001517

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning.In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

This dataset accompanies the open access article "Improving satellite chlorophyll-a retrieval in the turbid waters of the Bay of Fundy, Canada" published in Estuaries and Coasts (https://doi.org/10.1007/s12237-024-01334-x). A full methods description is provided in the article. Briefly, we processed daily satellite data from the MODerate-resolution Imaging Spectroradiometer (MODIS) on the Aqua satellite from 2003 to 2021 at 300 m resolution to understand and quantify spatial and temporal trends in chlorophyll-a concentration (chl-a, a measure of phytoplankton biomass), and suspended particulate matter concentration (SPM) in the Bay of Fundy surface waters. This dataset provides the median yearly and seasonal climatology of chl-a (mg m-3 ) and SPM (g m-3) from 2003 to 2021 as geotiff layers. Here winter is defined as January to March, spring as April to June, summer as July to September, and fall as October to December. Chl-a was calculated with the OCX-SPMCor algorithm and SPM was calculated with the Nechad et al 2010 algorithm.Cite this data as: Wilson, K., Hilborn, A., Clay, S., Devred, E. Data ofSatellite derived surface chlorophyll-a and suspended particulate matter in the Bay of Fundy from 2003 to 2021. Published February 2024. Ocean Ecosystem Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/272f5cf1-52bb-416b-b92a-8bc9384fc24d

Bivalve aquaculture has direct and indirect effects on plankton communities, which are highly sensitive to short-term (seasonal, interannual) and long-term climate changes, although how these dynamics alter aquaculture ecosystem interactions is poorly understood. Here, we investigate seasonal patterns in plankton abundance and community structure spanning several size fractions from 0.2 µm up to 5 mm, in a deep aquaculture embayment in northeast Newfoundland, Canada. Using flow cytometry and FlowCam imaging, we observed a clear seasonal relationship between fraction sizes driven by water column stratification (freshwater input, nutrient availability, light availability, water temperature). Plankton abundance decreased proportionally with increasing size fraction, aligning with size spectra theory. Within the bay, greater mesozooplankton abundance, and a greater relative abundance of copepods, was observed closest to the aquaculture lease. No significant spatial effect was observed for phytoplankton composition. While the months of August to October showed statistically similar plankton composition and size spectra slopes (i.e., food chain efficiency) and could be used for interannual variability comparisons of plankton composition, sampling for longer periods could capture long-term phenological shifts in plankton abundance and composition related to various processes, including climate change. Conclusions provide guidance on optimal sampling to monitor and assess aquaculture pathways of effects.Cite this data as: Sharpe H, Lacoursière-Roussel A, Gallardi D (2024). Ecological insight of seasonal plankton succession to monitor shellfish aquaculture ecosystem interactions. Version 3.2. Fisheries and Oceans Canada. Sampling event dataset. https://doi.org/10.25607/2ujdvh