In the Capital Urban Lands Plan (2015), Land designations identify the desired uses for federal urban lands in relation to the role they play for the Capital in a given location. Each land designation provides policy direction for an ensemble of sites that serve similar functions. https://ncc-ccn.gc.ca/our-plans/capital-urban-lands-planhttps://ncc-website-2.s3.amazonaws.com/documents/Capital-Urban-Lands-plan.pdf#page=45

The Local Area Plans and Community Plans are approved by Minister of Energy, Mines and Resources and Cabinet as a Policy Document. Newer joint Local Area Plans are approved in the same manner for non Settlement Land and by First Nation Chief and Council for Settlement Land.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

**NOTE: Not for operational use. This dataset is the result of an analysis (Aug 2018) of many input layers and as such the accuracy, currency, and completeness of the dataset cannot be relied upon for operational or management decision making.** Land designations that contribute to conservation are spatially-defined areas established through legislation or purchased for the protection of nature and cultural values, the conservation of biological diversity and ecosystem services and the management of natural resources. Over 40 land designations were divided into three broad categories: - **Protected Lands** includes all Parks & Protected Areas and Other Protected Lands with the primary purpose of the long-term conservation of nature and cultural values. - **Resource Exclusion Areas** includes all designations that fully exclude one or two resource activities for the purpose of conservation. - **Spatially Managed Areas** includes all spatial designations managing or limiting development or a resource activity for the purpose of conservation, or a spatial management regime in place to preserve specified elements of biodiversity but where activity is still allowed to occur. Land designations layers were combined into a single layer, with overlaps removed such that areas with overlapping designations were assigned to the highest conservation contribution category. **Data sources:** A list of the source datasets, including links to their sources, more information, and data processing steps is available [**here**](https://raw.githubusercontent.com/bcgov/designatedlands/v0.1.0/sources.csv). Details on methods are available [**here**](https://github.com/bcgov/designatedlands). Previous versions of the data are available [**here**](https://github.com/bcgov/designatedlands/releases).

The Guide to Crown Land Use Planning Atlas (CLUPA) is the authoritative source for information on overlays. The dataset maintains a spatial record for all geographic areas of Ontario affected by the designations that modify area- specific land use policy. To be used as an overlay to [CLUPA Provincial data class](/data/crown-land-use-policy-area-provincial). Official GEO title: CLUPA Overlay

Depicts the internal boundaries of the Niagara Escarpment Plan area. The 7 land use designations are: * escarpment natural area * escarpment protection area * escarpment rural area * [minor urban centre](/dataset/minor-urban-centres-in-the-niagara-escarpment-plan) * urban area * escarpment recreation area * mineral resource extraction area The land use designations represent the internal boundaries between designations within the Niagara Escarpment Plan. These internal boundaries are not intended to be site-specific and should not be used for accurate measurements. The exact delineation of designation boundaries on specific sites will be done by the implementing body through the application of the designation criteria as outlined in Part 1 of the Niagara Escarpment Plan, utilizing the most detailed or up-to-date information available and site inspection. [More information](http://www.escarpment.org)

Minor urban center is one of the 7 Niagara Escarpment Plan land use designations. This designation includes rural settlements, villages and hamlets. The boundaries of minor urban centres are defined by the municipality in an approved official plan and/or secondary plan. [More information](http://www.escarpment.org)

Examples of linework include: Dog Mushing Trails - part of the Mount Lorne/Carcross Road Area Plan, Schedule B - Land Use Plan200 Metre River Setback - part of the Golden Horn Local Area Plan, Schedule A, Land Management PlanDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.hel](mailto:geomatics.help@yukon.ca)[p@yukon.ca](mailto:geomatics.help@yukon.ca)

This polygon dataset shows First Nation land acquisitions designated as Other Land as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d).The purpose of this dataset is to show geographic boundaries for land acquisitions designated as Other Land, as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d). This is a dynamic dataset - data can change daily.Other Land includes land that has been purchased by the First Nations from private landowners or Surplus Provincial or Surplus Federal land that has been purchased from the Manitoba or Canada governments. The title to the land is privately held by a First Nation corporation until it gets transferred to the Government of Canada, however the mines and minerals and other residual interests may be owned by the Crown (Government of Manitoba) and they are required to be transferred to the Government of Canada (subject to third party interest resolution, if applicable).The sites are generally identified by title with reference to a plan of survey, metes and bounds description. Locations are mapped using existing cadastral or parcel mapping data, or reasonably illustrate the site within the dataset. A record may contain multiple polygons that have been combined to form one record.All boundaries are to be considered approximate and for illustrative purposes only.For more information on Treaty Land Entitlement (TLE) Agreements please visit the Manitoba government website: https://www.gov.mb.ca/inr/treaty-land-entitlement/index.htmlFields included [Alias (Field Name): Field description]OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generatedSite ID (SITE_ID): Site ID number of the selected siteArea in Square Metres (AREA): Area in square metresArea in Acres (ACREAGE): Area in acresBand Council Resolution Number (BCR_NO): Band Council Resolution numberName of the First Nation Making the Land Selection (BAND_NAME): Name of the First Nation making the land selectionSite Number (SITE_NO): Site number of the selected siteSelection Name (SELECTION): Name of the selected site

In the Greenbelt Master Plan (2013), the proposed land designations are a “classification” which assigns desired landscape character and uses to defined land areas across the Greenbelt. Areas are classified according to their desired role, whether to protect biodiversity, maintain agricultural resources, or accommodate permanent facilities. https://ncc-ccn.gc.ca/our-plans/greenbelt-master-planhttps://ncc-website-2.s3.amazonaws.com/documents/final-2013-greenbelt-master-plan-en.pdf#page=69

The purpose of this layer is to provide end users with a spatial representation of the Designated Areas in adopted Development Plans and their consolidated amendments in Manitoba. It also allows users of the data to undertake a variety of land use planning analyses based on Development Plan Designations. This layer is intended to be a source of data delivery as well as usage in situ.This dataset is comprised of boundary geometry representing the Development Plan Designations for all of the Development Plan bylaws (as defined in The Planning Act) in force and effect within the Province of Manitoba. Spatial referencing of the designations is based on the best available land parcel data for each municipality. Where available, land parcel data based on registered survey plans and ground control coordinates was used. Otherwise, the reference grid maintained by Manitoba Sustainable Development was used. The delineation of the boundaries is set by the bylaw establishing or amending the boundary of each designation. Dataset content is subject to: Ongoing changes in designated areas which are determined by amendments to adopted Development Plans or the adoption of new Development Plans. Ongoing development and maintenance of the land parcel datasets. Improvements to the land parcel data are used to improve the positional accuracy of the Development Plan designation polygons. As of the publication date of this dataset, the following known issues remain: For designation boundaries that include water boundaries, the water boundary that best reflects the intended designation boundary was used. In some instances, road allowances on a municipal boundary are included in both of the adjoining municipalities. Please visit the Manitoba Municipal Relations website for more information at www.gov.mb.ca/mr. The Development Plan Designations data reflects the most current designations at the time of export and was uploaded to Manitoba Maps as a feature layer. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated DP_BYLAW: Number assigned by planning authority to identify a specific bylaw DPA_BYLAW: Number assigned to a bylaw that amends an existing development plan bylaw PLANNINGDISTRICT: Name of the Planning District establishing the bylaws PLANNINGREGION: Area of responsibility for a Community and Regional Planning Branch (In the Department of Municipal Relations) office ACRES: Area of each polygon expressed in acres DES_NAME: Name of Designation as stated in the Development Plan bylaw DES_CATEGORY: Designation category as interpreted by Municipal Relations RES_MIN_ACRES_PER_LOT: Minimum acreage for a residential lot as defined by the Development Plan bylaw RES_MAX_ACRES_PER_LOT: Maximum acreage for a residential lot as defined by the Development Plan bylaw MUNI_NO: Manitoba municipality identifier number MUNI_NAME: Name of municipality AU_LIMIT: Animal Unit limit as set by the Development Plan Policy