City of Trois-Rivières landslide zones**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

Delineation of areas potentially exposed to landslides and protective bands.attributs:ID - Unique IdentifierType - Entity type**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A magnitude 5 earthquake scenario along an unnamed fault located about 15 km north-northeast of Burnaby City Hall and directly south of Mt Elsay. This fault is not known to be active, but this scenario represents a small but damaging event in the North Shore Mountains.

The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

The dataset shows the distribution and spatial extent of the 3D models that were created in the context of Canadian aquifers mapping projects from the Geological Survey of Canada.

Terrain Inventory Mapping (TIM) contains polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. TIM is multi-purpose and divides the landscape into units according to surficial material, surface expression and geomorphological process using the Terrain Classification System for British Columbia. Most of the inventory mapping was completed in the 1970s and 1980s on 1 to 50,000 scale base maps using air photo interpretation with selective field checking, and manual transfer and drafting of paper maps. These maps were later digitized and have been converted from IGDS or CAPAMP to ArcInfo to Geodatabase. This layer is derived from the STE_TEI_ATTRIBUTE_POLYS_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: TIM and TIMSOI. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01)

Terrain Stability Mapping (TSM) contains polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. TSM uses air photo interpretation and select field checking to divides the landscape into units using the Terrain Classification System for British Columbia and stability criteria. Polygon attributes include (but are not limited to) surficial material, surface expression, geomorphological processes, drainage class, slope range and stability class. TSM methods include manual air photo interpretation and setting stability criteria supported by selective field checking. This layer is derived from the STE_TEI_ATTRIBUTE_POLYS_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: TEMSET, TEMTSM, TSM, TSMREC, TSMDET, TBW, and TBS. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01)

STE_TEM_ATTRIBUTE_POLYS_SVW contains Terrestrial Ecosystem Mapping (TEM) polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. TEM divides the landscape into units according to a variety of ecological features including climate, physiography, surficial material, bedrock geology, soils and vegetation. TEM methods include manual air photo interpretation supported by selective field checking. This layer is derived from the STE_TEI_ATTRIBUTE_POLYS_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: TEM, NEM, TEMNSS, NEMNSS, TEMPRE, NEMPRE, TEMSEI, TEMSET, TEMTSM, TEMWHR, TEMSDM, TEMPRW, NEMPRW, and TEMSEW. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01)

Soil Survey Project Boundaries (soil mapping study areas) contains the soil survey project area and attributes describing each project (project level metadata), plus links to the locations of other data associated with the project (e.g., soil survey reports, polygon datasets, plotfiles, scanned maps, legends). Soil Mapping divides the landscape into units according to soil association, name, type, drainage, parent material, and texture. This layer is derived from the STE_TEI_PROJECT_BOUNDARIES_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: SOIL, TIMSOI, and SOILSW. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01) The Soil Survey dataset contains project boundaries as well as the soil survey polygons which are available in a variety of formats including: 1) via the [Soil Information Finder Tool](http://www2.gov.bc.ca/gov/content/environment/air-land-water/land/soil-information-finder) Mapping App (interactive app), 2) [Soil Survey Spatial data](https://catalogue.data.gov.bc.ca/dataset/soil-survey-spatial-view) with [Soil Name and Layer Files](https://catalogue.data.gov.bc.ca/dataset/soil-name-and-layer-files) (for download or viewing via iMapBC), or as 3) [Soil Mapping Data Packages](http://www.env.gov.bc.ca/esd/distdata/ecosystems/Soil_Data/Soil_Data_Pkgs/) with geodatabase or shape files, and a data dictionary.