These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

A single-tier municipality doesn't form part of an upper-tier municipality and assumes all municipal responsibilities set out under the Municipal Act and other Provincial legislation. A lower-tier municipality forms part of an upper-tier municipality. Municipal responsibilities set out under the Municipal Act and other Provincial legislation are split between the upper-tier and lower-tier municipalities.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 27 of the Atlas, Geological History of the Williston Basin and Sweetgrass Arch, Figure 14, Triassic Spearfish Lower Watrous and Lower Amaranth Isopach. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

Funded through DFO's Strategic Program for Ecosystem-based Research and Advice (SPERA), this benthic survey covers several seabed areas adjacent to Deer Island and Campobello Island, the Wolves Islands, and Grand Manan (NB) over a two-year study period (2016-2017). One hundred and fifty drift camera transects were completed within the ~91 sq-km study region collecting continuous high-definition video with periodic 4K resolution video (provided by a downward facing Blackmagic Production Camera 4K equipped with video lights). A Nikon D800 36.1 megapixel digital still imagery camera (equipped with a studio strobe light) captured seafloor images at ~30s intervals over a maximum 25-minute drift survey period. The camera was triggered by lowering the camera frame within 1 m of the seabed, releasing tension on a trigger weight suspended below the frame. Camera location was tracked using an ultra-short baseline acoustic positioning system (Tracklink 1500HA transceiver with 1505B transponder on the camera frame). Species presence/absence, abundance, and bottom type was recorded manually using PhotoQuad v1.4 software. An average field of view of 0.7 x 0.5 m was determined from a subset of digital still images within which the 10 cm diameter trigger weight was fully in view. Thirty-eight key and common species were described using explicit taxonomic identifiers, while other species were recorded within broader general categories (e.g. unidentified Cnidaria). Identification was made to the lowest possible taxonomic level. Primary bottom-type was defined as the grain size with the most percent coverage for each image/video interval. Grain size limits were determined using the Wentworth scale.Cite this data as: Lawton P. Benthic Species Presence/Absence in the Lower Bay of Fundy Derived From High Resolution Video and Still Imagery. Published May 2022. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.

Contains 2 datasets: * lower and single tier municipalities * upper tier municipalities and districts.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 18 of the Atlas, Jurassic and Lowermost Cretaceous Strata of the Western Canada Sedimentary Basin, Figure 21, Rock Creek/Lower Gravelbourg/Reston-Upper Watrous/Upper Amaranth Isopach and Lithofacies. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 18 of the Atlas, Jurassic and Lowermost Cretaceous Strata of the Western Canada Sedimentary Basin, Figure 21, Rock Creek/Lower Gravelbourg/Reston-Upper Watrous/Upper Amaranth Isopach and Lithofacies. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.