Description:This dataset consists of monthly mean simulation results from Canada's three Oceans: the Atlantic, Pacific and Arctic from 2015 to 2017.Abstract from the report:A numerical ocean model with biogeochemistry has been developed for a domain that spans Canada's three oceans: the Atlantic, Pacific and Arctic. The domain extends to 26°N in the Atlantic and 44°N in the Pacific, and spans the full width of each basin as well as the whole of the Arctic Ocean. The resolution is moderate to high (≈0.25°, 75 levels). A series of simulations was conducted to assess the best choices for biogeochemical model parameters across the diverse regions, using a variety of validation data sets including satellite ocean colour (surface chlorophyll and particulate organic carbon, integrated primary production), surface underway pCO2, and depth profiles of oxygen and nitrate concentration from ships and Argo floats. In addition to parameter values, processes examined include interactive sediments, fluvial nutrients, light attenuation by fluvial coloured dissolved organic matter (CDOM), and iron limitation. The results indicate that the optimal parameter set is one that limits phytoplankton losses to grazing and other processes so as to ensure strong biological drawdown of dissolved inorganic carbon and nutrients in spring and summer; among the parameter sets tested both insufficient and excessive drawdown were observed. Sensitivity to other processes such as interactive sediments, fluvial nutrients or CDOM attenuation was weak in most regions. In some regions, attenuation by CDOM or sequestration of nutrients in the sediment can substantially reduce primary production and zooplankton biomass, and fluvial nutrients can cause localized reduction of pCO2 by as much as 60 μatm. Iron limitation has an effect on the model solution in regions generally considered iron-replete; building a model that successfully spans iron-limited and non-iron-limited domains will require complete and accurate specification of iron sources and sinks.

The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

The wind power density layer shows the modeled wind power density [W/m2] at a height of 100 m above ground level, at each grid point, averaged over the three year period from January 1, 2008 to December 31, 2010. Values are presented in bins with ranges of 0.5 W/m2 each. Further details including data at different heights, and for individual years, can be obtained by clicking on the dot representing the grid point location.

FluWatch is Canada's national surveillance system that monitors the spread of flu and flu-like illnesses on an on-going basis.Activity Level surveillance is a component of FluWatch that provides an overall assessment of the intensity and geographical spread of laboratory-confirmed influenza cases, influenza-like-illness (ILI) and reported outbreaks for a given surveillance region. Activity Levels are assigned and reported by Provincial and Territorial Ministries of Health. A surveillance region can be classified under one of the four following categories: no activity, sporadic, localized or widespread.For a description of the categories, see the data dictionary resource. For more information on flu activity in Canada, see the FluWatch report.(https://www.canada.ca/en/public-health/services/diseases/flu-influenza/influenza-surveillance/weekly-influenza-reports.html)Note: The reported activity levels are a reflection of the surveillance data available to FluWatch at the time of production. Delays in reporting of data may cause data to change retrospectively.

This data contains the memorials and monuments located in communities across the country. Currently, more than 8,000 memorials are included in this data. This data is regularly updated as we continue to receive information on Canadian military memorials.

Note: To visualize the data in the viewer, zoom into the area of interest. The National Air Photo Library (NAPL) of Natural Resources Canada archives over 6 million aerial photographs covering all of Canada, some of which date back to the 1920s.This collection includes Time Series of aerial orthophoto mosaics over a selection of major cities or targeted areas that allow the observation of various changes that occur over time in those selected regions.These mosaics are disseminated through the Data Cube Platform implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The data is available as Cloud Optimized GeoTIFF (COG) for direct access and as Web Map Services (WMS) or Web Coverage Services (WCS) with a temporal dimension for consumption in Web or GIS applications. The NAPL mosaics are made from the best spatial resolution available for each time period, which means that the orthophotos composing a NAPL Time Series are not necessarily coregistrated. For this dataset, the spatial resolutions are: 100 cm for the year 1932 and 50 cm for the year 1950.The NAPL indexes and stores federal aerial photography for Canada, and maintains a comprehensive historical archive and public reference centre. The Earth Observation Data Management System (EODMS) online application allows clients to search and retrieve metadata for over 3 million out of 6 million air photos.The EODMS online application enables public and government users to search and order raw Government of Canada Earth Observation images and archived products managed by NRCan such as aerial photos and satellite imagery. To access air photos, you can visit the EODMS web site: https://eodms-sgdot.nrcan-rncan.gc.ca/index-en.html

Stream Macro-Reaches delineated through interpretation of Topographic features from the 1:50,000 scale Canadian National Topographic Series of Maps.

Note: To visualize the data in the viewer, zoom into the area of interest. The National Air Photo Library (NAPL) of Natural Resources Canada archives over 6 million aerial photographs covering all of Canada, some of which date back to the 1920s.This collection includes Time Series of aerial orthophoto mosaics over a selection of major cities or targeted areas that allow the observation of various changes that occur over time in those selected regions.These mosaics are disseminated through the Data Cube Platform implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The data is available as Cloud Optimized GeoTIFF (COG) files for direct access and as Web Map Services (WMS) or Web Coverage Services (WCS) with a temporal dimension for consumption in Web or GIS applications. The NAPL mosaics are made from the best spatial resolution available for each time period, which means that the orthophotos composing a NAPL Time Series are not necessarily coregistered. For this dataset, the spatial resolutions are: 100 cm for the year 1947 and 50 cm for the year 1977.The NAPL indexes and stores federal aerial photography for Canada, and maintains a comprehensive historical archive and public reference centre. The Earth Observation Data Management System (EODMS) online application allows clients to search and retrieve metadata for over 3 million out of 6 million air photos.The EODMS online application enables public and government users to search and order raw Government of Canada Earth Observation images and archived products managed by NRCan such as aerial photos and satellite imagery. To access air photos, you can visit the EODMS web site: https://eodms-sgdot.nrcan-rncan.gc.ca/index-en.html

This shapefile dataset was designed using polygons extracted from the Cartography of Coastal Ecosystems of Maritime Quebec geodatabase (2022, Laboratory for Dynamics and Integrated Management of Coastal Zones, Fisheries and Oceans Canada), described in the paragraph below. It consists of polygons with eelgrass and incorporates attributes describing the vegetation cover, the composition of the seagrass beds, the associated ecosystem name, the imagery data that allowed photo-interpretation and the presence or absence of field data. A unique sequence number associated with each polygon makes it possible to trace the paired polygon of the geodatabase of coastal ecosystems to attribute values not detailed in this shapefile. The study area includes all of the estuarine and maritime coasts of Quebec, with the exception of certain sectors, including most of the Lower North Shore and Anticosti Island, with the exception of villages of Kegaska, la Romaine, Chevery, Blanc-Sablon and Port-Menier. Some islands off the estuary and gulf coasts are part of the region covered, such as Île d'Orléans, Isle-aux-Coudres, Île Verte and Île Bonaventure.The Mapping of Coastal Ecosystems of Maritime Quebec was carried out jointly by the Laboratory for Dynamics and Integrated Coastal Zone Management (LDGIZC) of the University of Quebec at Rimouski as part of the Coastal Resilience Project; and by the Fisheries and Oceans Canada team, as part of the Integrated Marine Response Planning Program (IMRP). A classification of coastal ecosystems was carried out on more than 4,200 km of coastal corridor, focusing on estuarine and maritime coasts of Quebec located between the limit of the upper foreshore and the shallow infralittoral (about 10m deep). The mapping method developed is based on semi-automated segmentation and a photo-interpretation of coastal ecosystems, using very high resolution multispectral photographs (RBVI) acquired between 2015 and 2020 by DFO. The classification of polygons is based on the assignment of predefined value classes for the biological and physical attributes under study (e.g., substrates, plant type, vegetation cover, geosystem, etc. ). Helicopter-born oblique photographs and field data helped to reduce the uncertainty associated with photo-interpretation. UQAR and DFO conducted field sampling campaigns targeting the mediolittoral (4,390 stations) and the lower mediolittoral and infralittoral zones (2,959 stations), respectively , which validated some of the attributes identified by photo-interpretation and provided detailed information on community structure . The geodatabase of the Mapping of coastal ecosystems is hosted and managed by UQAR on their SIGEC-Web cartographic platform: https://ldgizc.uqar.ca/Web/sigecwebCredits © DFO (2023, Fisheries and Oceans Canada)Provencher-Nolet, L., Paquette, L., Pitre, L.D., Grégoire, B. and Desjardins, C. 2024. Cartographie des macrophytes estuariens et marins du Québec. Rapp. Tech. Can. Sci. halieut. Aquat. 3617 : v + 99 p.Grégoire, B., Pitre, L.D., Provencher-Nolet, L., Paquette, L. and Desjardins, C. 2024. Distribution d’organismes marins de la zone côtière peu profonde du Québec recensés par imagerie sous-marine de 2017 à 2021. Rapp. tech. can. sci. halieut. aquat. 3616 : v + 78 p.Grégoire, B. 2022. Biodiversité du relevé côtier Planification pour une intervention environnementale intégrée dans l’estuaire et le golfe du Saint-Laurent (2017–2021). Observatoire global du Saint-Laurent. [Jeu de données]Jobin, A., Marquis, G., Provencher-Nolet, L., Gabaj Castrillo. M. J., Trubiano C., Drouet, M., Eustache-Létourneau, D., Drejza, S. Fraser, C. Marie, G. et P. Bernatchez (2021) Cartographie des écosystèmes côtiers du Québec maritime — Rapport méthodologique. Chaire de recherche en géoscience côtière, Laboratoire de dynamique et de gestion intégrée des zones côtières, Université du Québec à Rimouski. Rapport remis au ministère de l’Environnement et de la Lutte contre les changements climatiques, septembre 2021, 98 p.

This catalog contains annual 30 m spatial resolution snow dynamics metrics for each snow-year from 2018-2019 to 2023-2024 for all of Canada. We gather all Landsat and Sentinel-2 images collected over Canada and identify the status of each pixel observation on the image collection date: snow (and ice), non-snow (i.e., land, water), unclear (i.e., clouds, shadows). We built an algorithm to calculate snow cover metrics for each pixel during each winter: start date of the first (and biggest) snow period [startF, startB], end date of the last (and biggest) snow period [endL, endB], number of days with snow cover in total (or in the biggest snow period) [lengthT, lengthB], number of snow periods (i.e., separated times with multiple confirmed snow observations) [periods], and a status classification (e.g., continuous snow, snow free) [status]. We do not obtain a clear observation every day because of satellite orbit frequencies and clouds. This means that timing-based metrics are identified by the middle date between two clear observations, with uncertainty quantified as half the length of the gap (i.e., ± days) [startF_u, startB_u, endL_u, endB_u, lengthT_u, lengthB_u].