Fisheries and Oceans Canada (DFO) selected the Manicouagan Peninsula area as a site of interest for the possible establishment of a Marine Protected Area (MPA) in 1998. With this in mind, DFO conducted surveys to assess benthic biodiversity between 2006 and 2008. During the various campaigns, more than a hundred stations were sampled using various tools to target epibenthic and endobenthic species. Various tools were used during the three years of sampling, including an SM (Smith-McIntyre) grab with an area of 0.1 m² and a height of 20 cm, an IKU-type grab with a surface area of 1.5 m² and a height of 50 cm, and a hydraulic dredge measuring 1.36 m wide and 0.66 m high with a net mesh size of 2.3 cm. As the dredge clogged fairly quickly, small organisms were collected in abundance. In 2006 and 2007, a camera mounted on a sled pulled by a boat along transects of varying lengths depending on the sampling campaign collected images (3,008 x 2,000 pixels) every 10 seconds, representing a seabed area of 40 x 40 cm.The data are presented in Darwin Core format in the file “donnees_manicouagan_data” The available data include taxonomic identifications of samples (individuals collected or identified in images) as well as metadata related to stations, including sampling date, depth, and geographic coordinates. Please note that the depths are for informational purposes only, since the bathymetry is very steep in this region.Further details on sampling can be found in the following report: Provencher, L et Nozères, C. 2011. Protocole de suivi des communautés benthiques de la zone de protection marine Manicouagan. Secr. can. de consult. sci. du MPO. Doc. de rech. 2011/051. iv +25 p. https://waves-vagues.dfo-mpo.gc.ca/library-bibliotheque/344357.pdf

Following the merger of the Duplessis and Manicouagan regions under the new name Côte-Nord, Quebec now has 21 tourist regions. The delimitation of regions is based on an unofficial division and is provided by Tourisme Québec. The boundaries were made using municipalities or MRCs.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

All the specific addresses of the City of Rouyn-Noranda. **This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Surface hydrographic network of the City of Rouyn-Noranda**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

All island polygons. Islands may overlap as there are islands within islands (e.g., a lake on an island contains an island). GNIS_NAME_1 contains the most atomic name for the island. For example, there are 3797 "Haida Gwaii" islands. If the island has not been named as part of a more specific group or with an individual name, "Haida Gwaii" is the GNIS_NAME_1 value. GNIS_NAME_2 and GNIS_NAME_3 values are null. If the island has a more specific name, "Haida Gwaii" moves to GNIS_NAME_2, and the more atomic name, such as "Moresby Island" is the GNIS_NAME_1. If the island has an individual name, belongs to a group, and is part of Haida Gwaii, the same logic of naming from most to least specific applies. For example, GNIS_NAME_1 = "George Island", GNIS_NAME_2 = "Copper Islands", GNIS_NAME_3 = "Haida Gwaii".

Location of timestampers.attributs:ID - Unique IdentifierNo - Number**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

GeoAI are buildings, hydrography, forests, and roads automatically extracted using Deep Learning models applied to a source dataset, typically aerial or satellite images. The primary aim of GeoAI is to increase Canada's availability of high-resolution foundational geospatial data for both spatial and temporal coverage.‌The infrastructure and expertise put in place by NRCan enables a rapid, efficient, and scalable data creation process through the use of leading-edge technology and Artificial Intelligence models. Published datasets for a given source can be revisited at a later date as more accurate models are developed and put into production. For now, only static files are available, but as the series develops, new products and services will be added.

Hamlets are smaller settlement areas identified in municipal official plans, generally without municipal water and sewer servicing. For precise boundaries and locations of hamlets, the appropriate municipality should be consulted.

Location of Major Infrastructure, Resource, Oil and Gas Projects in Nunavut, Northwest Territories and Yukon. Data and maps for illustrative purposes only. Users understand that, although all efforts have been made to accurately and exhaustively compile, locate and classify projects, the authors do not guarantee the accuracy and/or the comprehensiveness of the data and assume no responsibility for errors or omissions. CanNor does not assume responsibility for errors or omissions. In support of this initiative, proponents and partners are encouraged to contact CanNor should they identify any errors or omissions.

Toponymic Features entity is Named Feature (geographical name or toponym). CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)