The data represents the relative amount of manure production in the agricultural area of Alberta. It is an estimate of the degree to which livestock production may contribute to nutrient loading, pathogens and odour. The classes shown on the map are ranked between 0 (lowest) and 1 (highest). This resource was created in 2002 using ArcGIS.

The data, created in ArcGIS, represents an assessment of air quality risk for the agricultural area of Alberta in 2005. Agricultural activities that may have some influence on air quality manure production (odour) and cultivation intensity (particulate matter). The airsheds of the agricultural region of Alberta are considered to be uniform in their physical susceptibility to risk from agricultural activities. Air quality risk is a useful measure for those concerned about health, safety and nuisance issues related the quality of air in agricultural areas. Awareness of where agricultural activities related to livestock production and intensive cultivation are located, may be useful for people with health or nuisance related concerns. Blowing soil can cause respiratory problems and can reduce visibility on roads and highways. Dust from farm traffic can be a concern during peak agricultural activity, such as harvesting or manure hauling. Frequent strong odours can be unpleasant nuisance for neighbours. In areas of greater air quality risk, environmental farm planning can help to address the issues and provide solutions. Practices including pen/barn maintenance, method of manure application, manure storage, composting, adjusting, feed rations and reducing or eliminating tillage can be looked at in an environmental farm plan.

Facilities that separate and convert crude oil or other feedstock into liquid petroleum products, including upgraders and asphalt refineries.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Total soil moisture is the modelled amount of plant available water (mm) in the root zone of the soil. The value given is the amount calculated to be present on the modeled day of the product.Values are computed using the Versatile Soil Moisture Budget (VSMB)

The Elk Valley Area Based Management Plan (ABMP) - “Elk Valley Water Quality Plan” was developed according to Ministerial Order No. 113 to remediate water quality effects of past coal mining and to guide future development. The Elk Valley Water Quality Plan was developed by Teck with input from the public, First Nations, governments, technical experts and other stakeholders. The purpose of the Plan is to identify a strategy and implement solutions to address increasing selenium and nitrate water concentrations within the Valley, and assess and track levels of cadmium and sulphate in waters; while at the same time allowing for continued sustainable mining in the Valley. The Plan also lays out a strategy to address calcite formation associated with historical and current mining activity. The Plan was submitted to the British Columbia Minister of Environment for approval on July 22, 2014. The ministry amended the Elk Valley ABMP in 2025. More information can be found at https://elkvalleywaterquality.gov.bc.ca/.

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The WSER require owners or operators of wastewater systems with combined sewers to submit an annual report on the total volume and the number of days wastewater is discharged per month via combined sewer overflow (CSO) points as a result of precipitation.The map below shows the volume of effluent (in cubic metres) discharged in a year from all CSO points situated within the collection area of a wastewater system. For the most part, the volumes provided to ECCC are estimates.Please note, a value of “999999999” in the dataset indicates that the volume data is unavailable and it does not mean that a volume of 999,999,999 m3 was released within the collection area of a wastewater system.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.Data from QuebecAs of 2018, no combined sewer overflow volumes from Quebec municipalities are available since an equivalency agreement is now in effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater

Land Plats illustrate in map view the oil or gas Spacing Areas delimited in a pool, and names the geological formation in which the pool is recognised. Land Plats are the sole official record of where the Director of PandNG Titles Branch recognizes a pool of hydrocarbons to exist for the purpose of administering oil and gas title

The annual maximum and minimum daily data are the maximum and minimum daily mean values for a given year.

Sectors and days for collecting waste, recyclable materials and compostable materials.attributs:ID - Unique identifierDAY1 - Sector collection day (see also DAY2 and DAY3) DAY2 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY2) CALENDAR - Hyperlink to the sector collection calendar (see also DAY1 and DAY3)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**