Pelagic Marine Ecounits are intended to describe the sea surface and water column. Two variables were selected to derive pelagic ecounits:1. Salinity and 2. Stratification. The British Columbia Marine Ecological Classification (BCMEC) is a hierarchical classification that delineates Provincial marine areas into Ecozones, Ecoprovinces, Ecoregions and Ecosections. The classification was developed from previous Federal and Provincial marine ecological classifications which were based on 1:2,000,000 scale information. The BCMEC has been developed for marine and coastal planning, resource management and a Provincial marine protected areas strategy. A new, smaller level of classification termed ecounits developed using 1:250,000 scale depth, current, exposure, subsurface relief and substrate was created to verify the larger ecosections, and to delineate their boundaries. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

Marine Ecosection classification for coastal and offshore British Columbia. The Marine Ecosections are: Johnstone Strait; Continental Slope; Dixon Entrance; Hecate Strait; Queen Charlotte Strait; Juan de Fuca Strait; North Coast Fjords; Queen Charlotte Sound; Strait of Georgia; Subarctic Pacific; Transitional Pacific; and Vancouver Island Shelf. The British Columbia Marine Ecological Classification (BCMEC) is a hierarchical classification that delineates Provincial marine areas into Ecozones, Ecoprovinces, Ecoregions and Ecosections. The classification was developed from previous Federal and Provincial marine ecological classifications which were based on 1:2,000,000 scale information. The BCMEC has been developed for marine and coastal planning, resource management and a Provincial marine protected areas strategy. A new, smaller level of classification termed ecounits developed using 1:250,000 scale depth, current, exposure, subsurface relief and substrate was created to verify the larger ecosections, and to delineate their boundaries. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

In 2009, DFO defined 12 marine bioregions across the three oceans bordering Canada to support its marine planning efforts, such as the establishment of networks of marine protected areas. However, these bioregions cover vast areas and exhibit significant ecological heterogeneity, especially along the coasts. Yet, this heterogeneity in coastal ecosystems often needs to be considered at the local scale, particularly for management and conservation purposes.The objective of this exercise is to subdivide the Estuary and Gulf of St. Lawrence (EGSL) bioregion for the province of Quebec into coastal sub-bioregions to better reflect local and regional coastal characteristics. The coastal classification presented in this report is based on the integration of four existing classification systems for the EGSL, which were not specifically designed for classifying coastal ecosystems. Integrating these classification systems into a single approach allowed us to define 13 coastal sub-bioregions for the EGSL. Data presented here are the limit of the 13 ecoregions made from this work. A technical report is available for more details. See supporting documents:Gendreau, Y., Narancic, B. et Bourassa, M-N. 2025. Classification écologique du territoire côtier de l’estuaire et du golfe du Saint-Laurent au Québec. Rapp. tech. can. sci. halieut. aquat. 0000 :v + 22p.

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in Canada (British Columbia, New Brunswick, Newfoundland and Labrador, Nova Scotia, Prince Edward Island and Quebec). These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations based on pollution source assessment and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications that may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.

Description:Biophysical Units: Under the Pacific Marine Ecological Classification System (PMECS; DFO 2016; Rubidge et al. 2016), biophysical units are areas of distinct physiographic and oceanographic conditions and processes that shape species composition at spatial extents of 1000s of km. Geomorphic units:Geomorphic units or geozones are discrete geomorphological structures at the scale of 100s of km that are assumed to have distinctive biological assemblages (e.g., plateaus, ridges, seamounts, canyons). Although the spatial scale of geomorphic units is nested within biophysical units, a single geomorphic unit such as a trough may span more than one biophysical unit. The following 5 layers are included in this geodatabase:1. Biophysical_Units_L4A - Predicted PMECS Biophysical Units (Level 4A) output from the random forest analysis2. Biophysical_Units_L4B - Predicted PMECS Biophysical Units (Level 4B) output from the random forest analysis3. Biophysical_Units_ProbAssign_L4AB - Layer showing the probability that a grid cell was assigned to a given biophysical unit in the final random forest predictive modelling step4. Cluster_L4AB - Layer showing the output of species assemblage cluster analysis5. Geomorphic_Units - Geomorphic units for the BC coast that combines geomorphic units produced by Rubidge et al. 2016) and Proudfoot and Robb (2022).Methods:Biophysical Units:Rubidge et al. (2016) used a two-step process to identify biophysical units in British Columbia. First, a cluster analysis based on the similarity of species composition was used to group sites with similar species into distinct biological assemblages. Second, a random forest analysis was used to identify environmental correlates of the biological assemblages identified by the cluster analysis and to predict and assign the biological assemblage present in areas with too few biological data. Two different similarity thresholds were used to identify two levels (4A, 4B) of biophysical units; see Rubidge et al. (2016) for details. Indicator species for each assemblage (biophysical unit) were also identified.Geomorphic units:Rubidge et al. (2016) used the benthic terrain modeller (BTM) tool with broad and fine-scale benthic positioning index (BPI) parameters to define geomorphic units on the continental shelf in the Northern Shelf Bioregion and the continental slope in both the Northern Shelf Bioregion and Southern Shelf Bioregion. In 2022, geomorphic units were produced for the Strait of Georgia and Southern Shelf Bioregions following the same methods as Rubidge et al. (2016) (Proudfoot and Robb 2022). The geomorphic units produced as part of the PMECS process were merged with the geomorphic units produced for the Strait of Georgia and Southern Shelf bioregions to produce a continuous spatial data product representing geomorphic units for the Canadian Pacific continental shelf and slope. After merging, the geomorphic units produced in 2016 were unchanged (i.e., they are consistent with the original geomorphic units described in Rubidge et al. 2016).Data Sources:From Rubidge et al. (2016): Species data was taken from Fisheries and Oceans Canada (DFO) standardized fisheries-independent research surveys: groundfish trawl and long-line (2003-2013), Tanner Crab trawl and trap (2000–2006), and Dungeness Crab trap (2000–2014). Environmental data came from NASA, the Canadian Hydrographic Service, Fisheries and Oceans Canada, Bio-ORACLE, and elsewhere (details in Rubidge et al. 2016). From Proudfoot and Robb (2022): bathymetry data came from Natural Resources Canada (details in Proudfoot and Robb 2022).Uncertainties:The data is intended for use at the bioregional scale, and caution should be used for finer-scale analyses.

This dataset provides marine bacteriological water quality data for bivalve shellfish harvest areas in Canada (British Columbia, New Brunswick, Newfoundland and Labrador, Nova Scotia, Prince Edward Island and Quebec). Shellfish harvest area water temperature and salinity data are also provided as adjuncts to the interpretation of fecal coliform concentration data. The latter is the indicator of fecal contamination monitored by Environment and Climate Change Canada (ECCC) within the framework of the Canadian Shellfish Sanitation Program (CSSP). The geospatial positions of the sampling sites are also provided.These data are collected by ECCC for the purpose of making recommendations on the classification of shellfish harvest area waters. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO).

This dataset provides marine bacteriological water quality data for bivalve shellfish harvest areas in Prince Edward Island, Canada. Shellfish harvest area water temperature and salinity data are also provided as adjuncts to the interpretation of fecal coliform density data. The latter is the indicator of fecal matter contamination monitored annually by Environment and Climate Change Canada (ECCC) within the framework of the Canadian Shellfish Sanitation Program (CSSP). The geospatial positions of the sampling sites are also provided. These data are collected by ECCC for the purpose of making recommendations on the classification of shellfish harvest area waters. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO).This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/6417332a-7f37-49bd-8be9-ce0402deed2a

This dataset contains results from an eelgrass classification in Shippagan Harbour, New Brunswick. Derived from a Quickbird satellite image collected on July 27, 2007 at as close to low-tide as possible. Classification was objected-oriented using Definiens software. Data used for accuracy and training was collected along transects using a differential GPS positioned towfish holding sidescan sonar, and a video camera that was later transcribed as XY points to describe eel-grass presence.

This dataset contains results from an eelgrass classification for Bouctouche Bay, New Brunswick. True colour aerial photography at 57 centimetre resolution was collected on September 2, 2009 by Nortek Resources of Thorburn, Nova Scotia (http://www.nortekresources.com/). Image classification was conducted using eCognition Developer v. 8 Software, which first segments the image into spectrally similar units, which were then classified manually. Additionally, the Department of Fisheries and Oceans (Gulf Region, Moncton, NB) conducted a visual field survey in the same field season at 688 sites. Two-thirds of these sites were used to assist in image classification, while the remainder were used to assess accuracy. Three classes were identified:i. Good Quality Eelgrass: relatively dense, clean, green blades with minimal epiphytes or algal growth. ii. Medium Quality Eelgrass: predominately green blades that may have some epiphyte or algal growth. These stands can be less or equally dense as Good Quality Eelgrass, but the best grasses are certainly not as abundant.iii. Eelgrass Absent/Poor Quality: eelgrass is absent, or if it is present it is typically covered with epiphytes or other algae or dying or dead. Eelgrass was classified correctly 83.7% of the time in a fuzzy accuracy assessment technique, whereby those classes that were ‘off’ by one class, e.g. Good Quality eelgrass classed as Medium Quality, were given half credit towards the overall accuracy. Of 187 sites that were within the classification area, 131 were correct, 51 were "one-off", and 5 were incorrect [(131 + (51/2))/ 187 = 0.837].

An eelgrass distribution map was classified from remotely sensed imagery in Richibucto Harbour, New Brunswick. Derived from a Quickbird satellite image collected on August 28th, 2007 at as close to low-tide as possible. Quickbird's ground resolution is 2.4 m. Classification was objected-oriented using Definiens software. Accuracy was 81.5%. Data used for accuracy and training was collected along transects using a differential GPS positioned towfish holding sidescan sonar, and a video camera that was later transcribed as XY points to describe eel-grass presence.