Marine protected areas (MPAs) are one among a number of spatial management tools, and are defined as areas that are established for the long-term, and managed through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values.Currently, Fisheries and Oceans Canada has a number of MPAs designated under the Oceans Act and Areas of Interest for new MPAs at various stages of progress towards designation. These areas are ecologically significant, with species and/or features that require special management consideration.  An Oceans Act MPA can be established for any of the six conservation purposes outlined in the Act:• The conservation and protection of commercial and non-commercial fishery resources, including marine mammals, and their habitats;  • The conservation and protection of endangered or threatened marine species, and their habitats;  • The conservation and protection of unique habitats;  • The conservation and protection of marine areas of high biodiversity or biological productivity; • The conservation and protection of any other marine resource or habitat as is necessary to fulfill the mandate of the Minister; and• The conservation and protection of marine areas for the purposes of maintaining ecological integrity

Includes: * National Parks * National Marine Conservation Areas * heritage canals * National Wildlife Areas * Other Federal Protected areas This dataset is provided by the federal government, and may not include all Federal protected lands.

Pelagic Marine Ecounits are intended to describe the sea surface and water column. Two variables were selected to derive pelagic ecounits:1. Salinity and 2. Stratification. The British Columbia Marine Ecological Classification (BCMEC) is a hierarchical classification that delineates Provincial marine areas into Ecozones, Ecoprovinces, Ecoregions and Ecosections. The classification was developed from previous Federal and Provincial marine ecological classifications which were based on 1:2,000,000 scale information. The BCMEC has been developed for marine and coastal planning, resource management and a Provincial marine protected areas strategy. A new, smaller level of classification termed ecounits developed using 1:250,000 scale depth, current, exposure, subsurface relief and substrate was created to verify the larger ecosections, and to delineate their boundaries. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

Marine Ecosection classification for coastal and offshore British Columbia. The Marine Ecosections are: Johnstone Strait; Continental Slope; Dixon Entrance; Hecate Strait; Queen Charlotte Strait; Juan de Fuca Strait; North Coast Fjords; Queen Charlotte Sound; Strait of Georgia; Subarctic Pacific; Transitional Pacific; and Vancouver Island Shelf. The British Columbia Marine Ecological Classification (BCMEC) is a hierarchical classification that delineates Provincial marine areas into Ecozones, Ecoprovinces, Ecoregions and Ecosections. The classification was developed from previous Federal and Provincial marine ecological classifications which were based on 1:2,000,000 scale information. The BCMEC has been developed for marine and coastal planning, resource management and a Provincial marine protected areas strategy. A new, smaller level of classification termed ecounits developed using 1:250,000 scale depth, current, exposure, subsurface relief and substrate was created to verify the larger ecosections, and to delineate their boundaries. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

Biogeoclimatic Ecosystem Classification (BEC) zone boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by BEC zone provides a zonal ecosystem context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata

The Canadian Protected and Conserved Areas Database (CPCAD) is the authoritative source of data on protected and conserved areas in Canada. The database consists of the most up-to-date spatial and attribute data on marine and terrestrial protected areas in all governance categories recognized by the International Union for Conservation of Nature (IUCN), as well as Other effective area-based conservation measures (OECMs, or conserved areas) across the country. Indigenous Protected and Conserved Areas (IPCAs) are also included if they are recognized as protected or conserved areas. CPCAD adheres to national reporting standards and is freely available to the public.CPCAD is compiled and managed by Environment and Climate Change Canada (ECCC), in collaboration with federal, provincial, territorial, and other reporting authorities that provide the data. The database contains combined data from all these Canadian reporting authorities, who have determined that their areas meet the Canadian criteria as protected or conserved areas. CPCAD is used by a wide range of organizations, including governments, environmental non-governmental organizations (ENGOs), academia, land managers, industry, and the general public. CPCAD supports many of the Government of Canada’s priorities including Canada’s national reporting on protected areas, Canada’s international reporting on protected areas as a result of Canada’s commitments under the United Nations Convention on Biological Diversity, and Canada’s protected areas program by providing baseline information.More detailed information on CPCAD is available by downloading the User Manual.The data is current as of the date of the most recent revision. For prior years, please reach out to scf-geocarto-cws-geomapping@ec.gc.ca.

The spatial planning framework for Canada's national network of Marine Protected Areas (MPAs) is comprised of 13 ecologically defined bioregions that cover Canada's oceans and the Great Lakes. Note that the geographic boundaries for the bioregions are fuzzy and may change based on ecosystemic conditions.Detailed descriptions and discussions on the federal network of marine bioregions can be found in: - DFO. 2009. Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2009/056 (http://www.dfo-mpo.gc.ca/csas-sccs/publications/sar-as/2009/2009_056-eng.htm);- DFO. 2010. Proceedings of a National Science Advisory Process to Provide Guidance on the Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas; 15-16 June 2009. DFO Can. Sci. Advis. Sec. Proceed. Ser. 2009/039. (http://www.dfo-mpo.gc.ca/csas-sccs/publications/pro-cr/2009/2009_039-eng.htm); and - National Framework for Canada's Network of Marine Protected Areas (http://www.dfo-mpo.gc.ca/oceans/publications/mpanf-cnzpm/page01-eng.html).

Appropriately responding to a marine pollution event, especially hydrocarbon spills, often requires detailed knowledge of local habitat and environmental features. Access to high resolution habitat profiles can support effective spill response plans, informing discussions on protection priorities or expediated remediation. However, marine habitat composition data for a given area is often lacking due to the high cost and effort of conducting such surveys across the vast shorelines of Canada. The purpose of this study was to develop methodologies for conducting rapid and affordable habitat compositions in the marine environment via drone aerial photography; an emerging technology for conducting high resolution surveys. We used the Musquash Marine Protected Area (MPA; Musquash, NB, Canada) as a model system as it contains a diverse range of habitat types, is a region of conservation concern in Atlantic Canada, and is in close proximity to oil and gas handling facilities and vessel traffic. The MPA consists of a tidal river that outflows into the Bay of Fundy. Using Geographic Information System (GIS) software, we subdivided the MPA into several transects (N =61) that were used to generate flight plans for a Remotely Piloted Aircraft System (RPAS; DJI Mavic 3 Enterprise, DJI ). The RPAS was flown (6 m s-1) at an altitude of 100m (Above ground level) taking images with side (70%) and front (80%) overlap. Resulting images were then compiled as an orthomosaic map using Pix4Dmatic software. These data will be used to inform marine spill response planning in the region, to support marine planning and conservation, and Marine Protected Area (MPA) monitoring efforts as well as develop further methodological approaches for conducting RPAS-based habitat surveys in other coastal systems within Atlantic Canada. Cite this data as: Lawrence MJ, Coates PJ, Matheson K, Hamer A. Characterisation of intertidal habitat types in the Musquash Marine Protected Area using aerial drone photography. Published November 2025. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a habitat classification program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. In 2020, a habitat survey in the lower Musquash Marine Protected Area (MPA) was undertaken to further develop this project, using an Autonomous Underwater Vehicle (AUV) equipped with high-frequency (450 kHz) side scan sonar to build a habitat map of the MPA. This dataset includes mosaicked series of sonar images (raw & position-corrected versions), covering roughly 6 km2 of marine and intertidal areas in the Musquash MPA. Doppler Velocity logs and mission-specific files for each survey are also included, along with detailed methodological documentation. These data were generated from 17 separate survey missions that were completed in August, September and October 2020.

Ecosection boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by ecosection provides a landscape context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. Ecosections are distinguished from each other by enduring characteristics such as minor physiographic and macroclimatic or oceanographic variations. For more information on ecosections and the Ecoregion Classification System see: http://www.env.gov.bc.ca/ecology/ecoregions/index.html. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata