To identify the overall reach and configuration of the Capital Pathway, show the location of existing pathways (as of 2020) and proposed pathway segments, and distinguish between discovery routes and feeder links.Capital Pathway Strategic Plan, October 2020 https://ncc-website-2.s3.amazonaws.com/documents/Pathways-BOOK-10-15-2020-EN_Final_Compressed.pdf

Map of the number of individuals in official language minority communities (according to first official language spoken, adjusted responses) by economic region. Multiple responses distributed equally among respondents. Data from 2016 Census of Canada, 100% sample.

Location of timestampers.attributs:ID - Unique IdentifierNo - Number**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

All the specific addresses of the City of Rouyn-Noranda. **This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The purpose is to provide end users with a digital data representing the boundaries of incorporated municipalities in Manitoba. It also enables users of Manitoba spatial data to identify which municipality selected features fall within.This dataset is comprised of boundary geometry for all of the incorporated municipalities and Northern Affairs Communities within the Province of Manitoba.  The boundaries in this dataset represent the descriptions set forth in the Municipal Status and Boundaries Regulation (567/88R) and subsequent amendments, and regulations under The Northern Affairs Act.  The geospatial referencing of the Municipal Boundaries is based on the best available land parcel data for each municipality and Northern Affairs Community.  Where available, cadastral data based on registered survey plans was used.  Otherwise, the Manitoba Property Assessment Information dataset produced by Manitoba Municipal Relations was used.  The delineation of the boundaries was established according to the regulation establishing or amending the boundary of a municipality or Northern Affairs Community.  Dataset content is subject to:  Ongoing changes in municipal status and boundary and Northern Affairs Community boundary alterations that are generated through annexations, amalgamations, dissolutions or formations, all of which are approved by regulations made under The Municipal Act (for incorporated municipalities) and The Northern Affairs Act (for Northern Affairs Communities).  This dataset content is current to the most recent effective date of any such regulation amendment.   Ongoing development and maintenance of the land parcel datasets.  Improvements to the cadastral data are used to improve the positional accuracy of the municipal boundary polygons.   As of the publication date of this dataset the following known issues remain:  For municipal boundaries and Northern Affairs Communities that include water boundaries, such as in the Lake Winnipeg and Lake Manitoba areas the water boundary portion that best reflects the municipal boundary was used.     In some instances, road allowances on a municipal boundary are included in both of the adjoining municipalities.   Please visit the Manitoba Municipal Relations website for more information www.gov.mb.ca/mr/land_use_dev/index.html.   The Manitoba Municipal Boundaries data reflects the status of municipal boundaries and Northern Affairs Communities at the time of export and was uploaded to Manitoba Maps as a feature layer. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated MUNI_NO: Manitoba municipality identifier number MUNI_NAME: Legal name of municipality MUNI_TYPE: Type of municipality MUNI_LIST_NAME: Name of municipality suitable for alphabetical list MUNI_LIST_NAME_WITH_TYPE: Name of municipality suitable for alphabetical list including type

Feature point layer showing locations of community kitchens available for rent in ManitobaThis feature point layer shows locations of community kitchens available for rent in Manitoba. Each kitchen has a Food Service Establishment permit issued by Manitoba Health, and is a suitable facility to produce value-added food products for sale. For more information, visit Manitoba Agriculture. This layer is used in the Manitoba Commercial Community Kitchens map and the Commercial Community Kitchens in Manitoba application. Fields included [Alias (Field Name): Field description] UID (UID): Unique identifier for the kitchen Operating (Operating): Indicates whether or not the kitchen is currently in operation Facility Name (Facility_Name): Name of the kitchen Region (Region): Economic region in which the kitchen is located Address (Address): Physical address of the kitchen City or Town (City_or_Town): City or town in which the kitchen is located Phone (Phone): Phone number for the kitchen Website (Website): Website link for the kitchen Equipment (Equipment): List of available equipment in the kitchen Contact (Contact): Contact person for the kitchen Contact Email (Contact_Email): Email address of contact person for the kitchen Contact Phone (Contact_Phone): Phone number of contact person for the kitchen Secondary Contact (Secondary_Contact): Secondary contact person for the kitchen Secondary Contact Email (Secondary_Contact_Email): Email address of secondary contact person for the kitchen Secondary Contact Phone (Secondary_Contact_Phone): Phone number of secondary contact person for the kitchen Latitude (Latitude): Latitudinal coordinates of the representative centre of the feature in decimal degrees Longitude (Longitude): Longitudinal coordinates of the representative centre of the feature in decimal degrees

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

Individuals (15 years and over) with at least a university bachelor's degree living in Official Language Minority Communities. Refers to the individual's educational attainment or highest certificate, diploma or degree obtained by the person. The data used is based on the 2016 Census of Canada, 25% sample, the universe is the population 15 years and over.

An annual trawl survey is conducted in Southwestern Nova Scotia and the Bay of Fundy to assess the lobster stocks in the area. The survey is conducted with the Northeast Fisheries Science Center Ecosystem Survey Trawl (NEST), a small mesh trawl with a cod end liner, which ensures the capture of various sizes of lobster. The dimensions and location of the trawl are monitored and recorded throughout the tow using an electronic trawl mensuration system. In addition, water temperature and depth are also monitored. The target tow length is 1 kilometer which is tracked using an Olex marine charting system. Vessel crew, DFO science staff and a contracted at sea observer work together to perform required tasks and collect all relevant data. Catch from each tow is separated by species, weighed and counted. Length frequency data is collected on select groundfish and crab species and detailed morphometric data is collected on each lobster.PARAMETERS COLLECTED:Set information and profile - includes set date, time depth and locationCatch summary - weight and number caught of each speciesLength Freqeuncies - completed for up to 100 fish for selected speciesLobster Morphological Data - detailed data collected on each lobsterBottom TemperatureTrawl MetricsNOTES ON QUALITY CONTROL:Data is visually verified and double keypunched. On loading to Oracle, data is run through rigorous automated checks to verify data accuracy and integrity.SAMPLING METHODS:The target tow length is 1 kilometer which is tracked using an Olex marine charting system. Vessel crew, DFO science staff and a contracted at sea observer work together to perform required tasks and collect all relevant data. Catch from each tow is separated by species, weighed and counted. Length frequency data is collected on select groundfish and crab species, detailed morphometric data is collected on each lobster. Bottom temperature and trawl metrics are collected for each tow.CITATION LIST:Denton, Cheryl M.. 2020. Maritimes Region Inshore Lobster Trawl Survey Technical Description. Canadian technical reports of fisheries and aquatic sciences (DFO) 3376.

644 datasets of Typical Meteorological Years (TMY) created by joining twelve Typical Meteorological Months selected from a database of up to 20 years of CWEEDS hourly data. The months are chosen by statistically comparing individual monthly means with long-term monthly means for daily total global solar irradiance, mean, minimum and maximum dry bulb temperature, mean, minimum and maximum dew point temperature, and mean and maximum wind speed. These hourly datasets are used by the engineering and scientific community mainly as inputs for solar system design and analysis and building energy systems analysis tools. This dataset has been updated with the most recent changes made in March 2023. The solar values in these files are based on 0.1° x 0.1° (11 km x 11 km grid) for all of Canada. Refer to Data Resources below for additional information on the TMY file format.