Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants that combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) with hourly observations from various monitoring networks in North America, including the Canadian measurement networks operated by the provinces, territories and certain cities, as well as the various American networks in the context of the AIRNow program administered by US/EPA (US Environmental Protection Agency). RDAQA analysis provides the best description of current air quality conditions, and is used to inform the public, meteorologists in the various Environment and Climate Change Canada forecasting offices, Health Canada and other users about the distribution of air pollutants near the ground, and the performance of forecasting models. Each hour, a preliminary product is available approximately one hour after the observation measurement time, while final and Firework products are available approximately two hours after the measurement time. The preliminary and final products contain analysis of the chemical constituents O3, SO2, NO, NO2, PM2.5 (fine particles with diameters of 2.5 micrometers or less) and PM10 (coarse particles with diameters of 10 micrometers or less), while the Firework product contains analysis of PM2.5 and PM10.

Data has been collected primarily using a depth measurement device, such as an echo-sounder, in combination with a Global Positioning System (GPS) for horizontal positioning. Other survey methods, such as bathymetric LiDAR may also have been used. The survey method used in each body of water is shown in the [Bathymetry Index](https://geohub.lio.gov.on.ca/datasets/mnrf::bathymetry-index ).

The Fibre Recovery Zones (FRZ) define areas where increased waste rates may apply to avoidable waste left on a cutting authority as detailed in the Provincial Logging Residue and Waste Measurement Procedure Manual. The boundaries have been approved by the Director of the Forest Tenures Branch, Ministry of Forests, Lands, Natural Resource Operations and Rural Development. Current extent of the data is for the Coast Fibre Recovery Zones only.

**NOTE** This dataset is going to be replaced by the Data Catalogue layer: [Forest Inventory Ground Plots - Public Access](https://catalogue.data.gov.bc.ca/dataset/6d6d115f-4cc2-4141-909e-3344b3a72bcf) This new layer links to the updated database for all Forest Analysis and Inventory Branch ground sample plots. Growth and Yield dataset is a provincial data set that comprised of Permanent Sample Plots (PSP). Researchers such as GY modellers and those wanting to know the position of all samples will use the all status view to better understand the spatial distribution of historic measurement data including samples that are currently destroyed or inactive

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for tritium content in atmospheric water vapor sampled from monitoring stations in Ontario, Quebec and New Brunswick. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are for tritium activity concentration, expressed in units of becquerels per cubic meter (Bq/m3). Atmospheric water is sampled monthly for determination of tritium content. The majority of such monitoring activity occurs in close proximity to nuclear power plants. Until 1996, Health Canada monitored the areas near Darlington, Bruce and Pickering in Ontario, Gentilly in Quebec, and Point Lepreau in New Brunswick. In 1996, Health Canada’s monitoring of the Ontario stations was terminated to avoid redundancy, since a similar initiative was underway through the Ontario Ministry of Labour. Currently, the CRMN monitors six sites in the vicinity of Point Lepreau, four sites in the vicinity of Gentilly, and a single site in the Greater Toronto Area. The average tritium concentration for the CRMN stations is 0.22 Bq/m3 for the time period from 2004 to 2013. This is consistent with results reported for other monitoring stations in close proximity to Canadian nuclear power stations, and the levels are considered to be safe from a health perspective. Note that the tritium values are measured using liquid scintillator measurements. This requires removing the background contribution from the measurement. The uncertainty associated with each measurement, can lead to reported values of less than zero. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Forest Lorey's Height 2015Lorey's mean height. Average height of trees weighted by their basal area (m). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

A building is a structure that has a roof and walls and stands more or less permanently in one place. Small buildings have only their location recorded. A 'building to scale' is a structure that has one dimension larger than 50 metres for the 1: 20,000 scale and larger than 30 metres for the 1: 10,000 scale. Their extents are recorded. This product requires the use of geographic information system (GIS) software.

BCGS 1:2,500 scale grid, North Amercian Datum 1927. The British Columbia Geographic System is a geographic system in which the coverage in minutes and seconds of longitude is double the coverage in minutes and seconds of latitude for sheets at all scales.This particular grid was generated in the older NAD27 datum to replicate historic Water Rights paper maps used by surface water rights management program