The Nova Scotia Hydrographic Network is an enhanced version of the Nova Scotia Topographic Database's Water Features theme. This dataset includes network spines for connectivity of water flow and various attribution for flow direction, priority of water flow and toponymic objects where applicable.

This dataset provides results obtained by Health Canada’s Canadian Radiological Monitoring Network (CRMN) for 90Sr activity in milk samples originating from various locations across Canada. More information about the CRMN network can be found on the Health Canada website (see link below). From 1984 to 1993, data was collected from 20 locations. After 1993, routine milk analysis for radio-strontium activity was discontinued for all monitoring stations, except the Ottawa location. The results provided here are 90Sr activity concentrations in units of becquerels per litre (Bq/L). Milk is an important matrix for environmental radioactivity assessment since many radionuclides of health concern exhibit efficient soil to milk uptake pathways. As such, the surveillance of milk provides a very good indication as to the severity of environmental impact following a nuclear event. Strontium-90 (90Sr) is a radionuclide of particular concern because it has a long radiological and biological half-life coupled with a high affinity for incorporation into human bone and teeth. Nuclear weapons testing and nuclear accidents have released such long-lived radionuclides into the atmosphere, which in turn have entered the biological life cycle. Nevertheless, a steady decline in the activity concentration of 90Sr in milk can be seen since most of the nuclear weapon testing was halted in the 1960s. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Feature point layer showing COVID-19 rapid antigen test kit distribution sites in Manitoba.Feature point layer showing locations of distribution sites that currently have COVID-19 rapid antigen test kits available in Manitoba. The main purpose of this data is to provide the public with the hours of operation for these sites. Distributors include pharmacies, retail stores, and community libraries. This data is populated by Manitoba Shared Health and is updated as needed. This feature layer is used in the Manitoba COVID-19 Rapid Antigen Test Kit Availability Map and Manitoba COVID-19 Rapid Antigen Test Kit Availability application. For more information on Manitoba’s response to COVID-19, please visit the following site: https://www.gov.mb.ca/covid19/index.html Fields included [Alias (Field Name): Field description] Site Category (Site_Category): Indicates whether the site is a retail business, pharmacy, or community library Site Name (Site_Name): Official business name of the site  Address (Address): Street address of the site  City or Town (City_or_Town): City or town in which the site is located Postal Code (Postal_Code): Postal code that corresponds with the street address of the site  Phone (Phone): Telephone number for the site French Service (French_Service): Indicates whether a site self-identified as having services available in French; if unknown, value is null   Health Authority (Health_Authority): Name of the regional health authority where the site is located Hours of Operation (Hours_of_Operation): Listing of days and times that the site is open to the public Alt Hours Start (Alt_Hours_Start): Start date of when alternate hours are in effect Alt Hours End (Alt_Hours_End): End date of when alternate hours are in effect Alternate Hours of Operation (Alternate_Hours_of_Operation): Listing of alternate days and times that the site is open to the public Latitude (Latitude): Latitudinal coordinate of the site Longitude (Longitude): Longitudinal coordinate of the site

The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

Feature point layer showing locations of community kitchens available for rent in ManitobaThis feature point layer shows locations of community kitchens available for rent in Manitoba. Each kitchen has a Food Service Establishment permit issued by Manitoba Health, and is a suitable facility to produce value-added food products for sale. For more information, visit Manitoba Agriculture. This layer is used in the Manitoba Commercial Community Kitchens map and the Commercial Community Kitchens in Manitoba application. Fields included [Alias (Field Name): Field description] UID (UID): Unique identifier for the kitchen Operating (Operating): Indicates whether or not the kitchen is currently in operation Facility Name (Facility_Name): Name of the kitchen Region (Region): Economic region in which the kitchen is located Address (Address): Physical address of the kitchen City or Town (City_or_Town): City or town in which the kitchen is located Phone (Phone): Phone number for the kitchen Website (Website): Website link for the kitchen Equipment (Equipment): List of available equipment in the kitchen Contact (Contact): Contact person for the kitchen Contact Email (Contact_Email): Email address of contact person for the kitchen Contact Phone (Contact_Phone): Phone number of contact person for the kitchen Secondary Contact (Secondary_Contact): Secondary contact person for the kitchen Secondary Contact Email (Secondary_Contact_Email): Email address of secondary contact person for the kitchen Secondary Contact Phone (Secondary_Contact_Phone): Phone number of secondary contact person for the kitchen Latitude (Latitude): Latitudinal coordinates of the representative centre of the feature in decimal degrees Longitude (Longitude): Longitudinal coordinates of the representative centre of the feature in decimal degrees

All island polygons. Islands may overlap as there are islands within islands (e.g., a lake on an island contains an island). GNIS_NAME_1 contains the most atomic name for the island. For example, there are 3797 "Haida Gwaii" islands. If the island has not been named as part of a more specific group or with an individual name, "Haida Gwaii" is the GNIS_NAME_1 value. GNIS_NAME_2 and GNIS_NAME_3 values are null. If the island has a more specific name, "Haida Gwaii" moves to GNIS_NAME_2, and the more atomic name, such as "Moresby Island" is the GNIS_NAME_1. If the island has an individual name, belongs to a group, and is part of Haida Gwaii, the same logic of naming from most to least specific applies. For example, GNIS_NAME_1 = "George Island", GNIS_NAME_2 = "Copper Islands", GNIS_NAME_3 = "Haida Gwaii".

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

Toponymic Features entity is Named Feature (geographical name or toponym). CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@gov.yk. ca](mailto:geomatics.help@yukon.ca)

In celebration of the tremendous diversity of tree species that tell the story of our culture and history, the NCC released in September 2020 a compilation of close to 170 remarkable trees across Canada’s Capital region entitled A Living Legacy: Remarkable Trees of Canada’s Capital. An interactive map and downloadable book are available for free on the NCC’s website and will allow the public to discover distinctive features of these trees, revealing a story of the beauty of our natural heritage through the rich diversity of species thriving within Canada’s Capital. This compilation features trees according to their commonalities, which can include their physical relationship with the land, the fact that they were a source of food for Indigenous peoples, or for their contribution to the forest industry.https://ncc-ccn.gc.ca/remarkable-treeshttps://ncc-ccn.maps.arcgis.com/apps/MapJournal/index.html?appid=a9ba98fb7e8b4c2ba9be337235b95291

MetNotes are a geo- and time-referenced, free form polygon product issued by MSC that complement today's location-based dissemination systems. The concise text of a MetNote (similar to a Tweet) is consistent with communication today where people are seeking information at a glance. Meteorologists will issue a MetNote to add contextual and/or impact information to complement the public forecast that is valid over a specific area, for a specific time range.