The AAFC Infrastructure Flood Mapping in Saskatchewan 1 meter Bare Earth DEM are the bare earth DEMs created at a 1 m interval for the capture area of Saskatchewan. The bare earth DEM elevations were derived from a TIN surface model of the combined DTM Key Point and Ground classes in the LiDAR point cloud tiles. It should be noted that the grid point elevations have been interpolated from the LiDAR points and may contain greater uncertainty depending on the amount of interpolation performed.

The LiDAR data was produced for an Agriculture and Agri-Food Canada land and water resource study. The data is required to produce high resolution DEMs to improve hydrologic and environmental resource modelling within the area.

The National Hydro Network (NHN) focuses on providing a quality geometric description and a set of basic attributes describing Canada's inland surface waters. It provides geospatial digital data compliant with the NHN Standard such as lakes, reservoirs, watercourses (rivers and streams), canals, islands, drainage linear network, toponyms or geographical names, constructions and obstacles related to surface waters, etc. The best available federal and provincial data are used for its production, which is done jointly by the federal and interested provincial and territorial partners. The NHN is created from existing data at the 1:50 000 scale or better. The NHN data have a great potential for analysis, cartographic representation and display and will serve as base data in many applications. The NHN Work Unit Limits were created based on Water Survey of Canada Sub-Sub-Drainage Area.

The spatial representation for a Timber Supply Area or TSA Supply Block: A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination. A TSA Supply Block is a designated area within the TSA where the Ministry approves the allowable annual cuts

Administrative boundaries called mining divisions were once used for recording claims. This information is now historic. This dataset contains the codes for each of the 24 mining division. For example, 1=ALBERNI, 2=ATLIN, 3=CARIBOO, 4=CLINTON, 5=FORT STEELE. These boundaries are no longer used for current administration. Mining division is needed when submitting the title page for your Technical Work Report. More information on ARIS Reports (https://www2.gov.bc.ca/gov/content/industry/mineral-exploration-mining/british-columbia-geological-survey/assessmentreports/submissionmineral). They can also be used to reference historical records.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007

This service shows the percentage of the population who reported an Aboriginal identity by census division. The data is from the Census Profile, Statistics Canada Catalogue no. 98-316-X2016001.Aboriginal identity refers to whether the person identified with the Aboriginal peoples of Canada. This includes those who are First Nations (North American Indian), Métis or Inuk (Inuit) and/or those who are Registered or Treaty Indians (that is, registered under the Indian Act of Canada) and/or those who have membership in a First Nation or Indian band. Aboriginal peoples of Canada are defined in the Constitution Act, 1982, section 35 (2) as including the Indian, Inuit and Métis peoples of Canada.Users should be aware that the estimates associated with this variable are more affected than most by the incomplete enumeration of certain Indian reserves and Indian settlements in the 2016 Census of Population.For additional information refer to the 2016 Census Dictionary for 'Aboriginal identity'.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census division” web service, accessible in the data resources section below.

The spatial representation for a Natural Resource Area. An NR AREA is an amalgamation of all NR Regions within the supplied boundaries and acts as an administrative area to these regions as established by the Ministry. This dataset supersedes WHSE_ADMIN_BOUNDARIES.NRO_ADM_AREAS_SP

The Indigenous Mining Agreements dataset provides information on the Indigenous communities signatory to agreements, the types of agreements negotiated, exploration projects and producing mines.

A tribal council is a grouping of First Nations with common interests who voluntarily joined together to provide services to member First Nations.The tribal council geographic location dataset contains the geographic location of all tribal councils in Canada as points as well as basic attributes data. Each tribal council point represents its address as it is registered in Indigenous and Northern Affairs Canada (INAC) Indian Government Support System (IGSS). A connection with the IGSS is in place to ensure that any update to the system is reflected in the attributes data associated with the geography of each tribal council. This dataset is Indigenous Services Canada (ISC) and Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) official source for Tribal Councils geographic location on maps.