A magnitude 5 earthquake scenario along an unnamed fault located about 15 km north-northeast of Burnaby City Hall and directly south of Mt Elsay. This fault is not known to be active, but this scenario represents a small but damaging event in the North Shore Mountains.

This dataset contains observations of species occurrences from seafloor imagery collected by the autonomous underwater vehicle (AUV) during the 2012 Expedition to Cobb Seamount. The National Oceanographic and Atmospheric Administration-operated SeaBED-class AUV which collected photographic images from 4 transects ranging from 436 m to 1154 m in depth.

This dataset contains observations of species occurrences from seafloor imagery collected by the remotely operated underwater vehicle (ROV) during the 2012 Expedition to Cobb Seamount. The ROV operated by Fisheries and Oceans Canada was a customized Deep Ocean Engineering Phantom HD2+2 which collected photographic images from 12 transects ranging from 35 m to 211 m in depth.

The spatial representation for a polygon defining the area of the province defined as west of the Cascade Mountains

Terrestrial Ecosystem Mapping for Mt Broadwood Heritage Conservation Area in the Rocky Mountain Forest District (ttem_bd)

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical into electric energy with an installed capacity of 1 Megawatt or more generated from renewable energy, including biomass, hydroelectric, pumped-storage hydroelectric, geothermal, solar, and wind.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

Crop Heat Units (CHU) are calculated on a daily basis, using the maximum and minimum temperatures in order to account for a crop’s negative response to higher temperatures.The formula used to calculate the CHU value for a day is: (1.8 × (Minimum Temperature − 4.4) + 3.33 × (Maximum Temperature − 10) − 0.084 × (Maximum Temperature − 10)²) ÷ 2.0CHU values are only accumulated during the Growing Season, April 1 through October 31.

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical, and/or fission energy into electric energy with an installed capacity of 100 megawatts or more.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

This dataset provides the results obtained by Health Canada’s Canadian Radiological Monitoring Network (CRMN) for the gross alpha and beta activity concentrations in drinking water, given in units of becquerels per liter (Bq/L). More information about the CRMN network can be found on the Health Canada website (see link below). Although water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON. The Guidelines for Canadian Drinking Water Quality recommend screening levels of 0.5 Bq/L and 1.0 Bq/L for gross alpha and gross beta activity, respectively. The screening levels are set to reflect the most restrictive Maximum Acceptable Concentrations (MACs) for specific radionuclides in drinking water. If the screening levels are not exceeded, compliance with the guidelines can be inferred. The screening levels set out in the Guidelines for Canadian Drinking Water Quality are calculated based on annual averages of radionuclides in drinking water. Short-term exposure to levels above those recommended by these guidelines does not indicate a health risk. The measured gross alpha and gross beta activity concentrations presented here are well below the screening levels set by the Guidelines for Canadian Drinking Water Quality, with only one exception to date. This occurred February 28, 2011, and was attributable to the flushing of lead pipes at the water treatment plant. It resulted in a spike of naturally occurring lead radionuclides that was dealt with immediately by the City of Ottawa. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007