Fire management agreements divide land into 4 areas: * Crown Protection Area (CPA): The Crown is responsible for responding to all fires in the CPA * Municipal Protection Area (MPA): The municipality is responsible for responding in the MPA * Federal Protection Area (FPA): The federal government is responsible for responding in the FPA * Northern Fire Protection Area (NFPA): The local fire department (mostly in unorganized areas) is responsible for responding to all incidents and the suppression of fires in the NFPA

PURPOSE:Eastern Beaufort Sea beluga whales form one of the largest summering aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated to protect beluga whales and their habitats As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to moorings to (1) better understand oceanographic conditions within the TN MPA and (2) examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Several studies using this dataset have been completed, and others are ongoing. However, much more can be done with the acoustic and environmental data. The purpose of this report is to outline deployment methods and instrument settings for moorings to support the full use of the data collected. DESCRIPTION:Each summer, Eastern Beaufort Sea beluga whales form one of the largest aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated in the estuary to protect beluga whales and their habitats. As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to each PAM mooring to (1) better understand oceanographic conditions (i.e., temperature, salinity, turbidity, and wave conditions) within the TN MPA and (2) to examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Moorings have been deployed with varying configurations of oceanographic sensors in Kugmallit Bay since 2015, but typically record water temperature, salinity, depth, and wave conditions. In 2018, the program was expanded to the Niaqunnaq parcel of the MPA (Shallow Bay), and in 2021 it was expanded again to the Okeevik parcel of the MPA. These observatories have provided new knowledge about drivers of beluga habitat use in the TN MPA, in particular in Kittigaryuit, but more recently in Niaqunnaq and Okeevik.

Temperature logger data was collected from two Vemco miniloggers attached to range-testing moorings for an array of acoustic receivers at a depth of approximately 300 metres in the Gully MPA. The data covers 2021 through 2022.Cite this data as: Jeffery, N., Heaslip, S., and Stanley, R. Data of: Benthic temperature data from the Gully MPA. Published: June 2023. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/900c02b2-7eb7-48e3-8b3e-c3e65c99a8e6

In 2016-17, DFO Maritimes Region undertook a Marine Protected Area (MPA) network analysis for the Scotian Shelf-Bay of Fundy Bioregion. The analysis considered available bioregional-scale ecological and human use data in an effort to identify a draft MPA network design that would protect biodiversity while minimizing any potential impacts on commercial fishing and other industries. The data layers used for the offshore component of the MPA network analysis are provided here. These layers are not presented in their original forms and were modified (e.g. clipped, reclassified, etc.) specifically for use in the MPA network analysis. They should not be used for any other purpose. Please see Serdynska et al. 2021 for details on how each layer was created.Serdynska, A.R., Pardy, G.S., and King, M.C. 2021. Offshore Ecological and Human Use Information considered in Marine Protected Area Network Design in the Scotian Shelf Bioregion. Can. Tech. Rep. Fish. Aquat. Sci. 3382: xi + 100 p. https://publications.gc.ca/collections/collection_2021/mpo-dfo/Fs97-6-3382-eng.pdfCite this data as: Serdynska, A.R., Pardy, G.S., and King, M.C. Data of: Offshore Ecological and Human Use Information considered in Marine Protected Area Network Design in the Scotian Shelf Bioregion. Published: January 2022. Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/2d9cce9a-d634-4b49-879f-87c40c52acf2

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a habitat classification program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. In 2020, a habitat survey in the lower Musquash Marine Protected Area (MPA) was undertaken to further develop this project, using an Autonomous Underwater Vehicle (AUV) equipped with high-frequency (450 kHz) side scan sonar to build a habitat map of the MPA. This dataset includes mosaicked series of sonar images (raw & position-corrected versions), covering roughly 6 km2 of marine and intertidal areas in the Musquash MPA. Doppler Velocity logs and mission-specific files for each survey are also included, along with detailed methodological documentation. These data were generated from 17 separate survey missions that were completed in August, September and October 2020.

The selection of an Area of Interest (AOI) marks the beginning of the Oceans Act Marine Protected Area (MPA) establishment process led by Fisheries and Oceans Canada. The process includes completing detailed ecological and socioeconomic assessments, setting conservation objectives, determining boundaries and management measures, and eventually developing the regulations under section 35 of the Oceans Act. Collaboration, consultation, and engagement occurs with stakeholders and partners throughout each step of this process.

Appropriately responding to a marine pollution event, especially hydrocarbon spills, often requires detailed knowledge of local habitat and environmental features. Access to high resolution habitat profiles can support effective spill response plans, informing discussions on protection priorities or expediated remediation. However, marine habitat composition data for a given area is often lacking due to the high cost and effort of conducting such surveys across the vast shorelines of Canada. The purpose of this study was to develop methodologies for conducting rapid and affordable habitat compositions in the marine environment via drone aerial photography; an emerging technology for conducting high resolution surveys. We used the Musquash Marine Protected Area (MPA; Musquash, NB, Canada) as a model system as it contains a diverse range of habitat types, is a region of conservation concern in Atlantic Canada, and is in close proximity to oil and gas handling facilities and vessel traffic. The MPA consists of a tidal river that outflows into the Bay of Fundy. Using Geographic Information System (GIS) software, we subdivided the MPA into several transects (N =61) that were used to generate flight plans for a Remotely Piloted Aircraft System (RPAS; DJI Mavic 3 Enterprise, DJI ). The RPAS was flown (6 m s-1) at an altitude of 100m (Above ground level) taking images with side (70%) and front (80%) overlap. Resulting images were then compiled as an orthomosaic map using Pix4Dmatic software. These data will be used to inform marine spill response planning in the region, to support marine planning and conservation, and Marine Protected Area (MPA) monitoring efforts as well as develop further methodological approaches for conducting RPAS-based habitat surveys in other coastal systems within Atlantic Canada. Cite this data as: Lawrence MJ, Coates PJ, Matheson K, Hamer A. Characterisation of intertidal habitat types in the Musquash Marine Protected Area using aerial drone photography. Published November 2025. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B.

Marine protected areas (MPAs) are one among a number of spatial management tools, and are defined as areas that are established for the long-term, and managed through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values.Currently, Fisheries and Oceans Canada has a number of MPAs designated under the Oceans Act and Areas of Interest for new MPAs at various stages of progress towards designation. These areas are ecologically significant, with species and/or features that require special management consideration.  An Oceans Act MPA can be established for any of the six conservation purposes outlined in the Act:• The conservation and protection of commercial and non-commercial fishery resources, including marine mammals, and their habitats;  • The conservation and protection of endangered or threatened marine species, and their habitats;  • The conservation and protection of unique habitats;  • The conservation and protection of marine areas of high biodiversity or biological productivity; • The conservation and protection of any other marine resource or habitat as is necessary to fulfill the mandate of the Minister; and• The conservation and protection of marine areas for the purposes of maintaining ecological integrity

This dataset was developed to document the procedures for acquiring underwater images in the Banc-des-Américains Marine Protected Area (MPA). Its primary objective is to provide a comprehensive inventory of metadata linked to imagery campaigns that allowed us to conduct a basic characterization of the area, and now that are used for ecological monitoring of the benthic habitats within the MPA.Metadata were collected during imagery surveys conducted since 2012, using three main methods: drop cameras on the crest, baited drop stereoscopic cameras on both the crest and plains, and towed cameras on the plains. For each operation are shared the type of gear used, sampling method, date, geographic coordinates, and acquisition depth.The released dataset contains only descriptive information related to the acquisition of images : file identifier, location, sampling methodology, depth, and technical imaging parameters. It does not include image files themselves, visual content, or the results of image analyses.A systematic quality control is applied to ensure completeness and consistency of the metadata: field format standardization, validation of GPS coordinates, verification of dates and recorded depths. Clear instructions guide the recording of metadata to guarantee their reliability for management and scientific monitoring purposes.

The St. Anns Bank Marine Protected Area was established in June 2017. Data describing the spatial-temporal patterns and drivers of species movement is essential for evaluating species composition and to gauge the protective capacity of the MPA. Since 2015, an acoustic telemetry receiver array has been deployed and re-deployed annually in St. Anns Bank Marine Protected Area. Each receiver detects tagged fish that swim past and records hourly bottom temperature. Here we provide the bottom temperature data recorded on 46 receivers. Note that in 2021 the array design (mooring positions) changed. Please visit the Ocean Tracking Network data portal for more details (https://members.oceantrack.org/project?ccode=SABMPA).Cite this data as: Pettitt-Wade, H., Jeffery, N.W., Stanley, R.E. Data of: Bottom temperature data from St. Anns Bank MPA acoustic telemetry receivers deployed 2015 to 2022Published: January 2024. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.https://open.canada.ca/data/en/dataset/910b8e22-2fd1-4ba1-8db6-d16763c7a625