The Canadian indexes of social resilience and vulnerability were created to provide area-based information on resilience and vulnerability to natural hazards and disasters across Canada. Specifically, the Canadian Index of Social Resilience (CISR) aims to reflect a community’s ability to respond to and recover from natural hazards. In contrast, the Canadian Index of Social Vulnerability (CISV) aims to reflect the social vulnerability of an area based on factors that have the potential to amplify the impact of disasters on populations.Before the CISR and CISV were built, indicator frameworks were developed for social resilience and social vulnerability, respectively. Indicators were selected because of their demonstrated association with social resilience or social vulnerability. The selection was informed by the theoretical and research literature, existing indexes, availability of relevant data and engagement with subject-matter experts.The CISR and the CISV were created using data from Dissemination areas (DAs) across the country. The selected indicators were included in a principal component analysis, which is a statistical technique that allows a large number of indicators to be collapsed into a smaller number of interpretable components. Based on the results of the principal component analysis, DA-level scores were calculated for each index. Higher CISR scores correspond to DAs that are more resilient and higher CISV scores correspond to DAs that are more vulnerable.These indexes can be used to better understand areas which may experience the largest disproportional social impacts from natural hazards.

The Natural Disturbance Type map is based on the Provincial Biodiversity Guidebook (1995) and the current and most detailed version of the approved corporate provincial Biogeoclimatic Ecosystem Classification (BEC) Zone/Subzone/Variant/Phase map (version 12, September 2, 2021) (Data Catalog record: https://catalogue.data.gov.bc.ca/dataset/bec-map). The natural disturbance type classification code is used to designate a period process or event such as insect outbreaks, fire, disease, flooding, windstorms and avalanches that cause ecosystem change and renewal. Natural disturbance type classification and mapping is used for a wide variety of applications in British Columbia. A few examples include: delineation of Natural Disturbance Types for Landscape Unit Planning; delineation of Seed Planning Zones; as an input for Predictive Ecosystem Mapping; reporting on the ecological representation of the Protected Areas Strategy; and as a level in the classification hierarchy for Broad Ecosystem Units. Note that this mapping is deliberately extended across the ocean, lakes, glaciers, etc to facilitate intersection with a terrestrial landcover layer of your choice

The Natural Resources Conservation Board Service Area dataset is comprised of all the polygons that represent Natural Resources Conservation Board Service Areas in Alberta. The dataset is the administrative boundary for the 4 regional offices of Natural Resources Conservation Board.

Flood extent polygons from the current calendar year in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the flood products generated in the past year. For any data relating to previous years, please refer to the [Floods in Canada – Archive]( https://open.canada.ca/data/en/dataset/74144824-206e-4cea-9fb9-72925a128189) entry. Please note that the web mapping service may not display data if flood polygons have not been published by the EGS for the current year. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer : Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability : Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Flood extent polygons from the last three days in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the latest flood products generated in the past three days. For any data older than 72 hours, please refer to the [Floods in Canada - Current Year](https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71) entry. Note that the web mapping service may not display data if flood polygons have not been published by the EGS in the past three days. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product directly is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer: Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability: Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Yukon Bedrock Geology MapThis update of the Yukon bedrock geology map builds upon the previous compilation by Gordey and Makepeace (1999, 2001). It includes new, detailed bedrock geology maps and regional compilations that have been published by the Yukon Geological Survey and the Geological Survey of Canada between 1999 and 2015, as well as some recent thesis works. A few of these maps were partially integrated into the digital dataset by Gordey and Makepeace (2003), but only as overlay to the 1999 compilation. A number of errors and omissions from the 1999 compilation of Gordey and Makepeace were also noted and corrected during compilation of this version of the map.The Yukon bedrock geology GIS dataset is regularly updated and can be downloaded from the Yukon Geological Survey ' s website: [https://yukon.ca/en/science-and-natural-resources/geology](https://yukon.ca/en/science-and-natural-resources/geology) . Users are advised to consult the website regularly to ensure they are working with the latest version of the geodatabase or shape files. This update of the GIS dataset includes an expanded attribute structure (compared to the 1999 dataset) that facilitates searching of the geodatabase.This dataset requires the gscGeology font in order to properly label the bedrock polygons. This font file is packaged with the dataset when downloaded from [https://yukon.ca/maps](https://yukon.ca/maps) or [https://yukon.ca/en/science-and-natural-resources/geology](https://yukon.ca/en/science-and-natural-resources/geology) .The Yukon Geological Survey aims to provide users with the best available geoscience data for Yukon. Any revisions or additional geological information known to the user would be welcomed by the Yukon Geological Survey.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Productive forest land base is defined as the total Crown forest area, determined by subtracting the following from the total area of the Cariboo Natural Resource Region: * All non-Crown land * All Crown land committed to non-timber use through a Land Act designation * All non-forest Crown Land, and * All forest area classified as brush or non-commercial cover in the Forest Inventory. See the CCLUP Land Use Order Implementation Direction for more information: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/natural-resource-use/land-water-use/crown-land/land-use-plans-and-objectives/cariboo-region/cariboochilcotin-rlup/cclup_land_use_order_implementation_direction_companion.pdf

Most of these events involved community evacuations, significant structural loss and/or involvement of a Ministry of Natural Resources (MNR) Emergency Response Officer. Events include those assigned to MNR by an Order-In-Council under the Emergency Management and Civil Protection Act as well as events where MNR provided requested emergency response assistance. These events fall into one of ten type categories: * dam failure * drought /low water * erosion * flood * forest fire * soil and bedrock instability * Petroleum Resource Center event * EMO requested assistance * continuity of operations event * other requested assistance This product requires the use of geographic information system (GIS) software.

An abiotic damage event is a non-biological event -- such as wind or an ice storm -- that has damaged areas of forested land. Abiotic damage event information is mainly used to: * generate summary maps for these events at a general or provincial scale * monitor the extent of damage for forest fire prevention purposes * calculate gross timber volume loss estimates caused by these events This product requires the use of geographic information system (GIS) software.

## Get data on boundaries of local climatic areas used for forest fire weather forecasting. This dataset shows the boundaries of administrative areas used for forest fire weather forecasting. North of the French River, boundaries correspond closely with Environment Canada’s areas for public weather forecasting. South of the French River, 25 Environment Canada areas are combined into six larger areas for provincial forecasting.