Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2015.attributes:ID - Unique identifierSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The product High Resolution Digital Elevation Model (MNEHR) is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The level curves are derived from a LiDAR survey carried out in May 2014.The equidistance is 25 cm, the absolute planimetric accuracy (XY) isof approximately 40 cm and the absolute altimeter accuracy (Z) is approximately 20 cm.The urban sectors covered are the urban perimeters of Rouyn, Noranda,Granada, Évain (partially), Lac-Dufault and the airport.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

The Physical Exposure component of the National Human Settlement Layer (NHSL), defined here as the ‘Physical Exposure Model’, includes a delineation of settled areas and related land use across Canada, as well as information about buildings, persons, and building replacement values (structure and contents) within those areas.Buildings within the inventory are classified using a combination of occupancy types, engineering-based construction types adopted for Canada, and design levels representing the approximate building code requirements at the time of construction. The inventory is derived from detailed housing statistics provided at the dissemination area level as part of the 2016 national census and from georeferenced business listings. Building populations at different times of day are estimated for standard daytime hours (9am-5pm); for morning and evening commute hours (7am-9am; 5pm-7pm), and; for nighttime hours when the majority of people are home (7pm-7am). Replacement values are provided for structural, nonstructural, and contents components of buildings, based on industry replacement costs for representative regions across Canada.The physical exposure model is provided in two formats: (1) According to settled areas (i.e., polygons), which are areas that approximately delineate clusters of buildings across Canada. Summary statistics about buildings and populations within each settled area boundary are provided. (2) According to building archetypes (i.e., points) within settled areas. These are represented as point locations at the centroid of the corresponding settled area, and each settled area can have multiple point features corresponding to different building archetypes present within that area. In total, the model characterizes 35.2 million people in 9.7 million buildings across 390,000 locations with a total approximate replacement value of $8.2 trillion (2019 CAD) including contents.

A Railroad Crossing is where the road surface is common to both the Railway Authority and the Ministry of Transportation Road Network; also includes overhead and under passes. It is a Point feature

Wildlife Key Areas (WKA) are locations used by wildlife for critical, seasonal life functions. WKAs are identified by interpreting observed locations of wildlife at key times of year, not through intensive habitat assessment. Polygons derived from interviews with locals and from GIS interpretation of wildlife/habitat surveys. GIS interpretation follows criteria specific for taxon and/or populations of taxon. Key Areas are based on observed locations of wildlife at key times of year, not on habitat assessment. With new information, boundaries and designations of Key Areas can change and additional Key Areas can be identified. Furthermore, Key Areas are not the only sites important for wildlife. Other information sources can identify other sites important for wildlife for reasons outside the scope of the WKA Inventory Program. Updates to Key Areas occur only periodically. For the most current information, please consult with the Regional Biologist for your area of interest. If you have questions or would like to contribute to the WKA database, please contact the WKA Inventory Program ( [wka@yukon.ca](mailto:wka@yukon.ca) ).Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Inventory of building footprints in the City of Rouyn-Noranda.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Feature layer showing current municipal burning restrictions in Manitoba.This feature layer shows the current municipal burning restrictions in Manitoba. Fields included ( Alias (Field Name): Field description.) OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generated. Municipality (Municipality): Legal name of the municipality Mutual Aid District (Mutual_Aid_District): Name of the mutual aid district.  The Mutual Aid System is a no-charge, reciprocal system of emergency response and assistance that towns, villages and municipalities in southern Manitoba can access through their local fire departments.  For more information about mutual aid districts, please refer to the Office of the Fire Commissioner website. Telephone (Telephone): Phone number for the municipal office. Email (Email): Email address for the municipal office. Restrictions Flag (Restrictions_Flag): Number indicating the presence or absence of municipal burning restrictions where 1 = "Burning Restrictions" and 0 = "No Restrictions". Current Restrictions (Current _Restrictions): Description of the burning restriction notice. The Office of the Fire Commissioner (OFC) asks all municipalities to inform the OFC immediately at firecomm@gov.mb.ca when implementing or changing the status of municipal burning restrictions during times of high fire danger conditions. Contact the OFC if you have questions about the municipal burning restrictions: by email at firecomm@gov.mb.ca by phone at 204-945-3322 (toll free 1-800-282-8069)Contact the appropriate municipal office if you have questions about restrictions in specific municipalities.