Benthic Marine Ecounits in coastal and offshore British Columbia. Benthic ecounits are intended to describe the sea bed and nearshore. Seven variables were selected to derive benthic ecounits: 1. Depth; 2. Slope; 3. Relief; 4. Temperature; 5. Exposure; 6. Current and 7. Substrate. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

An ecoprovince is an area with consistent climatic or oceanography, relief and regional landforms. There one oceanic, two marine / terrestrial and seven terrestrial ecoprovinces occurring within British Columbia. Ecoprovinces are meant to be mapped at 1:2,000,000 for use in provincial state of the environment reporting

A systematic oceanographic monitoring program was initiated in September 1989 at twenty-five monitoring stations in the Passamaquoddy Bay area and approaches by Dr. Shawn Robinson based out of the St. Andrews Biological Station (SABS). Stations were established in a uniform grid pattern of two arcminutes latitude and longitude over the study area in order to develop a database on the spatial patterns of water properties. Monthly measurements of the water column for the temperatures and salinity at all stations was completed using a Seacat SBE 19 internally recording CTD from Sea-bird Electronics Inc. The CTD was programmed to record conductivity, temperature, and depth at a frequency of 2 hz, corresponding to 2 measurements per meter of water depth. CTD casts were recorded for each of the 25 stations in the study area monthly using the R/V Pandalus, and later the CCGS Viola M. Davidson based out of SABS. The CTD was configured such that the sensors were oriented towards the benthos and the CTD was then attached to a hydraulic winch on the deck of the ship by a stainless steel cable one meter above a weight, and lowered 1 m below the water's surface in order for the CTD to equilibrate for one minute. The CTD was then lowered at 1 m/s to the benthos using a metered block on the winch to determine when the CTD had reached the maximum depth at that station. Once the weight had touched the bottom, the CTD was retrieved from the water, turned off, and placed in a bucket of fresh seawater in order to minimize equilibration time at the next station. Initially, the CTD measured salinity via water forced through the salinity cell with the drop rate of 1 m/s, but in August 1992, a pump was mounted on the CTD in order to provide a more consistent flow of water across the salinity cell. Surface temperatures were measured from bucket samples collected upon arriving at each station using a hand-held mercury thermometer at each station, and Secchi disk measurements were recorded. All data were downloaded from the CTD upon return to SABS using a DFO computer and the proprietary Sea-Soft software. Downcast data from each profile was retained, binned into 1 m intervals, and processed to remove data spikes, density inversions, and anomalies due to inadequate instrument equilibration. Processed data was then stored in the DFO's Oracle database (PTRAN) under the IMTA_SABS schema in the INVHYD and INVINF tables. Station numbers and locations are recorded in the CTD_STATIONS table in the IMTA_SABS schema.Cite this data: Robinson, S. Data of: Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018). Published: October 2019. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, NB. https://open.canada.ca/data/en/dataset/12184962-7879-4214-aef0-b31162f04a27

CHS offers 500-metre bathymetric gridded data for users interested in the topography of the seafloor. This data provides seafloor depth in metres and is accessible for download as predefined areas.

This dataset was compiled as part of a multiyear effort lead by Fisheries and Oceans Canada (DFO) to support sustainable aquaculture regulation in the Coast of Bays, an area of the south coast of Newfoundland. It is the second of a series aiming to provide an oceanographic knowledge baseline of the Coast of Bays.This dataset includes temperature, salinity, and dissolved oxygen concentration profiles collected during CTD surveys, each survey containing a varying number of casts/profiles taken within the area of interest. In total, 760 profiles from 11 surveys, executed over 276 stations, were collected from June 2009 to November 2013. Data were processed and quality controlled using the instrumentation manufacturer guidelines, custom tools as well as visual inspection. Data are provided in tab-delimited text-based format compatible with most data processing language and tools (e.g. MS. Excel) as well as with the Ocean Data View software (https://odv.awi.de/) for rapid visualisation. A summary of the CTD profiles and stations surveyed is also provided as a comma separated values (CSV) file.A full description of the data and of its use in the context of the motivating project can be found in http://www.dfo-mpo.gc.ca/csas-sccs/Publications/ResDocs-DocRech/2017/2017_077-eng.html. Analyses from this dataset were presented during a Canadian Science Advisory Secretariat (CSAS) meeting which took place in St John’s in March 2015 (http://www.dfo-mpo.gc.ca/csas-sccs/schedule-horraire/2015/03_25-26b-eng.html) and from which a Science Advisory Report (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/SAR-AS/2016/2016_039-eng.html) and Proceedings (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/Pro-Cr/2017/2017_043-eng.html) were published.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at a series of sites across Canada, to build a better understanding of existing marine ecological conditions. The program began data collection in 2019, and with the onset of Phase 2 in 2023, the Maritimes region study area was expanded and renamed ‘Northwest Fundy Shores’. A physical oceanography program was designed to align with the oceanographic interests and data needs of local interest holders. Starting in 2023, oceanographic parameters including water temperature, salinity, depth and turbidity have been monitored at a series of locations in Passamaquoddy Bay, the St. Croix River, and along the Bay of Fundy coast, including the Musquash estuary Marine Protected Area (MPA). This dataset includes seasonal CTD (conductivity, temperature and depth) and turbidity data starting in spring 2023. Instruments are maintained through the winter months at a limited number of sites. Data collection methods are primarily moored instruments on the bottom in water depths of 5-90 meters, and a few buoyant surface floats. Overall, this dataset captures seasonal dynamics in near-shore marine environments in Passamaquoddy Bay, the St Croix River, the Bay of Fundy and the Musquash MPA. Cite this data as: Coastal Environmental Baseline Program (Maritimes Region), Northwest Fundy Shores conductivity, temperature and depth data. Published in May 2025. Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. 14-02-2025

This dataset contains the surface temperature and salinity data of the enlarged coastal thermograph network of the St. Lawrence river, estuary and gulf system. It includes data from the Canadian Hydrographic Service water level network (SINECO), the Department of Fisheries and Oceans (DFO)-Quebec long-termed thermograph monitoring program network and the oceanographic buoy network.Each station is linked with a .png file showing the temperature and salinity time series and with a .csv file containing the surface temperature and salinity data themselves (columns : Station,Latitude,Longitude,Date(UTC),Depth/Profondeur(m),Temperature/Température(ºC),Salinity/Salinité(psu)).Supplemental InformationA detailed description of the networks (SINECO, oceanographic buoys and the DFO-Quebec thermograph monitoring program) is available at the St. Lawrence Global Observatory (SLGO) portal :SINECO : https://ogsl.ca/en/tide-gauges-dfo-chs/Oceanographic buoys : https://ogsl.ca/en/marine-conditions-buoys-dfo/Thermographs: https://ogsl.ca/en/marine-conditions-thermographs-dfo/Technical Reports related to the Thermograph Network (the last one is also available at the same hypertext link mentionned above) :Pettigrew, B., Gilbert, D. and Desmarais R. 2016. Thermograph network in the Gulf of St. Lawrence. Can. Tech. Rep. Hydrogr. Ocean Sci. 311: vi + 77 p.Pettigrew, B., Gilbert, D. and Desmarais R. 2017. Thermograph network in the Gulf of St. Lawrence: 2014-2016 update. Can. Tech. Rep. Hydrogr. Ocean Sci. 317: vii + 54 p.

Seamounts have been identified as Ecologically or Biologically Significant Areas (EBSAs) due to their unique oceanography and ecology; they frequently serve as sites for fisheries and as habitat for a number of species of conservation concern. A mix of isolated seamounts and seamount complexes are distributed throughout Canada’s Pacific offshore waters, although only a subset of these are named. We used several pre-existing spatial databases and predictive models to map all named seamounts within Canada’s Exclusive Economic Zone (EEZ), all named seamounts fished by Canada in international waters, and any predicted (modelled) unnamed seamounts in the EEZ. These data are intended to inform marine planning initiatives in BC by providing collaborative, peer-reviewed scientific data at scales relevant to a BC coast-wide analysis.

Likelihood of Presence of Harbour Seal in the Bay of Fundy and Port Hawkesbury Area Response Plan. The Coastal Oceanography and Ecosystem Research section (DFO Science) reviewed science sources and local knowledge sources to estimate where Harbour seals are seasonally present and delineate these areas. As of March 2017, this dataset delineates the presence of Harbour seals in the Bay of Fundy and Port Hawkesbury areas of Nova Scotia designated within the Area Response Planning (ARP), identified under the World Class Tanker Safety System (WCTSS) initiative, based on the Transport Canada Response Organizations Standards.A version of this dataset was created for the National Environmental Emergency Center (NEEC) following their data model and is available for download in the Resources section.Cite this data as: Lazin, G., Hamer, A.,Corrigan, S., Bower, B., and Harvey, C. Data of: Likelihood of presence of Harbour Seal in Area Response Planning pilot areas. Published: June 2018. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. https://open.canada.ca/data/en/dataset/5bbc1575-4267-44fa-ae35-ee08cc2af8fb

Bay and Channel (fresh and marine) features and associated names