Hydrogeological Regions provide a framework to introduce the regional hydrogeology of Canada and to connect apparently disparate studies into a broader framework. The hydrological regions are first order areas used to capture and summarize data that will help develop more detailed profiles of each region. Comparison of findings within and between regions will allow scalable extension to sub-regional and watershed scale mapping.Canada has been classified into nine principal hydrogeological regions. Each region is described briefly based on the following five hydrogeological characteristics (Heath, 1984):system components and geometry;water-bearing openings;rock matrix composition;storage and transmission;recharge/ discharge.The hydrogeological classification emphasizes major geological provinces and rock formations. Fundamental water-bearing openings and rock matrix properties help determine the quantity (storage), flux (transmission), and composition of formation waters. These same properties and any overlying sediment cover affect recharge/ discharge rates for regional formations. While regional attributes are general, a simple aquifer mapping scheme can further describe the nature and character of aquifers in each region. For example, general groundwater settings across the country could be described as has been done by USGS principal aquifers [1]. Thus the regional framework can potentially link from national scales to watershed scales by identifying typical aquifer types based on readily available geological maps that use water-bearing character as a common attribute.The nine hydrogeological regions include:CordilleraMountains with thin sediment over fractured sedimentary, igneous and metamorphic rocks of Precambrian to Cenozoic age. Intermontane valleys are underlain by glacial and alluvial deposits of Pleistocene age.Plains (Western Sedimentary Basin)Region-wide basin of sub-horizontal Paleozoic to Cenozoic sedimentary rocks are overlain by thick glacial deposits filling buried valleys. Incised post-glacial valleys provide local relief. Shallow gas, coal, and brines may occur.Canadian ShieldUndulating region of thin glacial sediment overlying complex deformed, fractured PreCambrian igneous, metamorphic and sedimentary rocks. Region contains several terrains: sedimentary basins, structural belts, and glacial-lacustrine basins.Hudson Bay (Moose River) BasinSedimentary basin of Paleozoic to Mesozoic sub horizontal carbonate and clastic sediment covered by surficial deposits, with low relief and poor drainage.Southern OntarioEastern Great Lakes region is underlain by gently-dipping Paleozoic, carbonate, clastic and gypsum-salt strata overlain by glacial sediments up to 200 m thick with tunnel valleys. Karst, bedrock valleys, shallow gas and brines are also important components.St. Lawrence LowlandsLowlands underlain by shallow-dipping Paleozoic sedimentary rocks and thick glacial sediment in glacial-marine basins. Appalachian and Precambrian uplands discharge water to valleys. Shallow gas and saltwater intrusion are possible.AppalachiaUpland to mountainous region with thin surficial sediment on folded Paleozoic sedimentary and igneous rocks. Range of rock types yields a wide range of water compositions. Valleys contain important alluvial aquifers.Maritimes BasinLowlands with flat-lying, Carboniferous clastic , salt, and gypsum rocks contain shallow coal deposits. Surface glacial sediment is thin and discontinuous. Salt water intrusion is possible.PermafrostArctic islands and most areas north of 60o contain frozen ground affects on groundwater flow. Diverse topography and geology define sub-regions of sedimentary basins and crystalline rocks. Glacial sediment is thin, discontinuous; local peat accumulations are significant.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Summer, Winter Alpine, and Winter Forest-Dwelling habitat model for caribou in the Itcha, Ilgachuz, and Rainbow Mountains of West-Central BC. This habitat model was developed using telemetry from the Itcha-Ilgachuz, Rainbow, and Charlotte Alplands Herds. [Season] field should be used to split the data out into separate summer, winter alpine, and winter forest-dwelling habitat models. Model development is detailed in _Apps, C. D., T. A. Kinley, and J. A. Young. 2001. Multi-scale habitat modeling for woodland caribou in the Itcha, Ilgachuz, and Rainbow mountains of west-central British Columbia.Wildlife Section, Ministry of Water, Land and Air Protection, Williams Lake, British Columbia, Canada_. See also: https://catalogue.data.gov.bc.ca/dataset/caribou-habitat-model-for-the-western-cariboo-region-2017-. __Note: The 2017 habitat model covers a similar area, but does not supersede the 2001 habitat model.__

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Background:More than 80% of the heat produced in the Earth's crust comes from granitoid rocks. When granitoid rocks form they naturally concentrate radioactive elements such as U, Th, and K, and the radiogenic decay of these elements is an exothermic reaction. The radioactive decay of these elements within a granitoid body may generate local heat anomalies and elevated geothermal gradient at relatively shallow crustal levels. In combination with other local rock properties (e.g, porosity, permeability, thermal conductivity), radiogenic heat has the potential to generate a geothermal resource. The decay of radioactive elements converts mass into radiation energy, which in turn gets converted to heat. While all naturally radioactive isotopes generate some heat, significant heat generation only occurs from the decay of 238 U ,235 U ,232 Th and 40 K. Therefore, potential heat production is governed by the concentrations of U ,Th and K in the rock. In igneous rocks, radiogenic heat production is dependent on the bulk chemistry of the rock and decreases from acidic (e.g. granite) through basic to ultra basic rock types. Therefore, granites with anomalously high concentrations of U ,Th and K are targets for calculating potential radiogenic heat production. Potential radiogenic heat production (A)from plutonic rocks can be calculated using this equation:A (\\u03BCW/m 3 )=10 -5 \\u1D29 (9.52c u +2.56c K +3.48c Th )where "c" is the concentration of radioactive elements "U" and "Th" in ppm, and "K" in %; and "\\u1D29" is the rock density. Heat production constants of the natural radio-elements U, Th, K are 9.525x10 -5 , 2.561x10 -5 and 3.477x10 -9 W/kg, respectively.Data and Methods:Geochemical data from \~1760 samples of plutonic rocks from Yukon are used to calculate potential heat production. The calculated values for radiogenic heat production (A) are plotted over the mapped distribution of Paleozoic and younger plutonic rocks and major crustal faults are also shown for reference.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.