GNWT HSS Mercury Sampling Locations with associated data recordings for viewing on a public facing web page.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track human-related emissions to air of 3 substances (mercury, lead and cadmium) and facility-based emissions to air of 1 substance (arsenic). The 4 substances are defined as toxic under the Canadian Environmental Protection Act, 1999. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, and by source. Global emissions data are also provided for mercury. The indicators inform Canadians about emissions of mercury, lead and cadmium to air from human activity and emissions of arsenic from facility-based reporting in Canada. These indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and air pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track human-related emissions to air of 3 substances (mercury, lead and cadmium) and facility-based emissions to air of 1 substance (arsenic). The 4 substances are defined as toxic under the Canadian Environmental Protection Act, 1999. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, and by source. Global emissions data are also provided for mercury. The indicators inform Canadians about emissions of mercury, lead and cadmium to air from human activity and emissions of arsenic from facility-based reporting in Canada. These indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and air pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The contaminants in fish database is a compilation of contaminant data analysed from fish tissue at the Fresh Water Institute from 1970 to 2005. Data include lab number, region, analysis, organs, species, lake, form (whole fish, headon dressed, headless dressed), weight, and length and contaminant concentrations. Total mercury was the predominant contaminant measured. Results were expressed as ppm or ppb based on the parameter analyzed. Concentrations are expressed based on wet weight.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 3 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead and cadmium and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 3 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 3 substances and water pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

This dataset is a compilation of numerous data files recovered as part of a data request in 2024 from a historical archive of DFO research data. Sediment and Suspended Particulate Matter (SPM) samples were collected over more than a decade as part of Dr. Douglas Loring’s research program while working at the Bedford Institute of Oceanography (BIO). Samples were collected as part of individual and collaborative research projects, and links to the relevant primary science publications and reports are included in the data in an effort to provide context to the data, as well as describe the field and laboratory techniques used to generate the attached data.

The layer provides information on suspended particulate matter (SPM) concentrations by area. There is a natural interaction phenomenon between hydrocarbons and SPM, that creates hydrocarbon-SPM aggregates. The SPM in the water column, hence has an effect on hydrocarbon capacity to sink to the bottom in aggregate form (Gong et collab., 2014 ; Fitzpatrick et collab., 2015, cited in Centre d'expertise en analyse environnementale du Québec, 2015). Additional InformationThe suspended particulate matter data for this layer are derived from multiple sources given the need to cover the St. Lawrence portion from Montreal to Anticosti. The layer has been cut into 6 different zones. Denis Lefaivre, a researcher at Maurice-Lamontagne Institute, has provided the coordinates of the points allowing the delimitation of areas. The values in each zone are derived from different studies carried out at different times. The references are cited below for each of the polygons from West to East, as well as for the summary:1- Department of Sustainable Development, Environment and Climate Change and Environment and Climate Change Canada, 2016. Recommendations for Suspended Matter Management (ESM) during dredging activities. Quebec. 64 pages and appendices. http://planstlaurent.qc.ca/fileadmin/publications/diverses/Registre_de_dragage/Recommandations_dragage.pdf2- D'Anglejan, B. 1990. Recent Sediments and Sediment Transport Process in the St. Lawrence Estuary. In Oceanography of a Large-Scale Estuarine System: The St. Lawrence, edited by M. I. El-Sabh and N. Silverberg. New York: Springer-Verlag, 109-153.3- Silverberg, N., and B. Sundby. 1979. Observations in the maximum turbidity of the St. Lawrence estuary. Can. J. Earth Sci. 16: 939-950.4- Michel Lebeuf, 2016.Unpublished personal data.Collected between 2015-2016 for research purposes.5- Sundby, B. 1974. Distribution and Transport of Suspended Particulate Matter in the Gulf of St. Lawrence. Canadian Journal of Earth Sciences11 (11): 1517-1533.6- Gong, Y., X. Zhao, Z. Cai, S. E. O'Reilly, X. Hao and D. Zhao. 2014. A review of oil, dispersedoil and sediment interactions in the aquatic environment: Influence on the fate, transportand remediation of oil spills. Marine Pollution Bulletin, vol. 79: 1-2, p.16-33. 7- Fitzpatrick, F.A., M.C., Boufadel, R., Johnson, K., Lee, T.P., Graan, A.C., Bejarano, Z.,Zhu, D., Waterman, D.M., Capone, E., Hayter, S.K., Hamilton, T., Deffer, M.H.,Garcia, et J.S., Hassan. 2015. Oil-particle interactions and submergence from crudeoil spills in marine and freshwater environments – Review of the science and futurescience needs. U.S. Geological Survey Open-file report 2015-2016, 33 p.8- Centre d'expertise en analyse environnementale du Québec,2015.Hydrocarbures pétroliers : caractéristiques, devenir et criminalistique environnementale –Études GENV222 et GENV23, Évaluation environnementale stratégique globale sur leshydrocarbures. Ministère du Développement durable, de l’Environnement et de la Lutte contreles changements climatiques, 41 p. et annexes.9- CSL – Centre Saint-Laurent, 1997. Le Saint-Laurent : dynamique et contamination des sédiments, Montréal, Environnement Canada – Région du Québec, Conservation de l’environnement, 127 p. (coll. BILAN Saint-Laurent). [Rapport thématique sur l’état du Saint-Laurent].

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide and volatile organic compounds at the national, regional and urban area levels and at local monitoring stations. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide, and volatile organic compounds at the national, regional and urban levels and at local monitoring stations. The national and regional indicators are presented with their corresponding Canadian Ambient Air Quality Standard when available. Canadians are exposed to air pollutants on a daily basis, and this exposure can cause adverse health and environmental effects. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators