Cold-water corals are conspicuous in the waters off Eastern Canada. Despite that, there are few DNA sequence records from specimens collected in the region available in GenBank, and not all species recorded in the region have sequence data regardless of geographic origin. This can limit the use of eDNA techniques to detect and identify corals. Our objective was to sequence and publish sequences for two octocoral DNA barcoding markers: CO1 and MutS. We sequenced and deposited 36 sequences to GenBank from 19 specimens representing three sea pen taxa (Octocorallia: Pennatuloidea): Distichoptilum gracile, Pennatula aculeata, and Protoptilum carpenteri. Identification of all specimens was confirmed by B. M. Neves before submission. Specimens and DNA tissues were donated to the Canadian Museum of Nature, where they are currently stored. This publication is part 1 of a series of GenBank submissions by our lab.Specimens were collected from across the Northwest Atlantic and originate from depths ranging between 200-1924 meters. Specimens were collected as part of research vessel multispecies trawl surveys or remotely operated vehicle (ROV ROPOS) surveys. DNA was isolated and purified using the QIAgen DNeasy Blood and Tissue kit, with an initial overnight incubation with Proteinase K. Two commonly used octocoral barcoding regions were amplified using previously described primers: 1) COII8068F (McFadden et al., 2004) and COIOCTR (France and Hoover, 2002) for the CO1 gene, and 2) ND42599F (France and Hoover, 2002) and mut3458R (Sánchez et al., 2003) for the MutS gene. Amplifications were conducted using 12.5 µl of Green DreamTaq Master Mix (Thermo Fisher Scientific), 1 µl of template DNA, 0.5 µl of each 10 µM forward and reverse primers, 0.5 µl of 10 µM reverse primer, and 10.5 µl of water. Thermocycling was run as follows: 3 min of initial denaturation at 95 °C, followed by 40 cycles at 95 °C for 30 s, 30 s at annealing temperature of 48 °C, then 65 s at an extension temperature of 72 °C, and a final elongation at 72 °C for 4 min. PCR products were cleaned using Agencourt AMPure XP Beads (Beckman Coulter) and sent to The Center for Advanced Genomics, Toronto, Canada for Sanger sequencing. Sequences were visualized and aligned using Geneious Prime 2022.0.2. Obtained sequences have been deposited in GenBank under accession numbers OQ569768- OQ569784 and OQ420359- OQ420377. This work was funded by Fisheries and Oceans Canada under an Enhanced Regional Capacity grant (2020-2021) and the Marine Conservation Targets (MCT) program (2021-2024), Newfoundland and Labrador Region.

Considered the "king" of sea lions, the Steller sea lion (Eumetopias jubatus) is the biggest of all sea lions and enjoys a lifespan of up to thirty years. In Canada, the Steller can be spotted along the rocky coast of British Columbia. This hefty mammal usually travels alone or in a small group, but wisely, it joins others for protection during the mating and birthing season. Little is known about its oceanic lifestyle; however, the good news for this sea-loving mammal is that since the Steller sea lion first became protected in 1970, the size of the adult population has more than doubled. Recent trends in the abundance of Steller sea lions (Eumetopias jubatus) in British Columbia were assessed based on a series of thirteen province-wide aerial surveys conducted during the breeding season (27-June to 06-July) between 1971 and 2013.

A research survey on American lobster (Homarus americanus) and rock crab (Cancer irroratus) has been carried out annually on the Magdalen Islands since 1995 to assess the abundance and structure of populations in this area. The survey is carried out during the first two weeks of September and covers the southern part of the Magdalen Islands, from "Baie de Plaisance" to "Grande-Entrée", extending slightly eastwards between "Havre-aux-Maisons" and "Grande-Entrée". The survey lasts 8 to 15 days, depending of the weather conditions, and covers a maximum of 48 stations. Approximately half of the stations are surveyed in duplicate (two tows per station). The tows always cover 500 meters, with a slightly variable trawl opening (as explained above), averaging around 10 meters.The gear used is a Nephrops trawl, a benthic trawl originally developed for langoustine fishing in Brittany, but slightly modified to target lobster. The trawl is deployed from the CCGS Leim and the harvested organisms are hauled aboard and sorted. Cephalothorax length, sex and shell stage are recorded for all lobsters. This is supplemented by information on reproductive conditions for certain size classes, and dissections of 25 males and 25 females per mission. Rock crabs are also included in the survey and are counted with additional measurements of shell width, sex and shell condition that are recorded on predetermined stations. For other stations individuals data are collected depending on the time available between trawl hauls.The publication contains 4 files; the "Information_stations" file which contains the data of the stations, the "Data_homard_lobster_survey" file which contains the measurements of each lobster, the "Nombre_crabe_crab_number" file which contains the count of rock crabs, the "Mesure_crabe_crab_measurement" file contains the characteristics measured for each crab. Each of the files can be linked by the "date", "st", "tr" columns. The “bat” column notes the boat code, because the gear is not deployed in the same way on each boat.*This record consist of raw data and quality has not been verifiedAssociated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publication: https://open.canada.ca/data/en/dataset/99cb7034-f3d5-4da4-a5bc-e81315cfb8eb

The Culture Point dataset is comprised of all the points that represent Hamlets, Localities and Townsites in Alberta. The formation of a Hamlet can occur if there are 5 or more buildings used as dwellings with a majority of which are on parcels of land smaller than 1850 square metres, has a generally accepted boundary and name and contains parcels of land that are used for non-residential purposes. Hamlet is an unincorporated community that can be designated by the council of Municipal District or Specialized Municipality within their boundaries, or by the Minister of Municipal Affairs within the boundaries of an Improvement District. Locality is an unincorporated place or an area with scattered population. Townsite is a federally administered village. The boundaries of rural classification of Locality and Townsite are often undefined.

Canada is divided into 338 electoral districts. A representative or member of Parliament is elected for each electoral district. Following the release of population counts from each decennial census, the Chief Electoral Officer determines the number of seats in the House of Commons and publishes the information in the Canada Gazette. Electoral boundaries commissions then determine the adjustments to the constituency boundaries. The federal electoral boundaries commissions are independent bodies that make all decisions regarding the proposed and final federal electoral boundaries. Elections Canada provides support services to the boundaries commission in each province. Based on reports from these commissions, the Chief Electoral Officer prepares a representation order that describes the boundaries and specifies the name and the population of each FED. The representation order is in force on the first dissolution of Parliament that occurs at least seven months after its proclamation. The 2013 Representation Order (proclaimed on October 5, 2013) was based on 2011 Census population counts, and increased the number of FEDs to 338, up from 308 from the previous 2003 Representation Order. Ontario received fifteen additional seats, Alberta and British Columbia each gained six seats while Quebec added three seats. On June 19, 2014, the Riding Name Change Act, 2014 (Bill C-37) received Royal Assent changing the names of 31 FEDs. The names of FEDs may change at any time through an Act of Parliament.

A research survey on American lobster (Homarus americanus) has been conducted annually in the Magdalen Islands since 1995 to assess the abundance and structure of lobster populations in this area. Starting in 2007, the main objective was modified to include the diversity and abundance of benthic species associated with lobster habitat. Only benthic species data associated with lobster habitat are presented in this dataset.Surveys were generally conducted during the first two weeks of September from 2007 to 2020 on the entire south side of the Magdalen Islands, from Grosse-Île to Havre-Aubert. The sampling plan consists of 70 trawl tows on 50 fixed stations, between 4 and 35 meters in depth. Some stations had double tows. Specimens were collected using a Nephrops-type door trawl with a total width of 3.04 meters consisting of four Vexar™ lined baskets of 19 millimeter mesh size in order to harvest small individuals. Start and end positions were recorded to calculate the distance traveled at each tow using the geosphere library in R. The year 2011 is not included in the dataset, as biodiversity data were not recorded. Since 2017, the average tow distance has been reduced from 1000 meters to 500 meters. The opening of the trawl is also noted every minute throughout the duration of the tow so that the area sampled can be calculated. The area covered in each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Event_data" file includes generic activity information, including date and location. The "Occurrence" file includes the taxonomy of the observed species, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Benoît Bruneau (Benoit.Bruneau@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Special cases were noted in the "identificationRemarks" field and selected specimens were confirmed with field photos mentioned in "associatedMedia". Data quality checks were performed using the R obistools and WORMS libraries. All sampling locations were spatially validated.

The Copper Redhorse (Moxostoma hubbsi) is the only fish whose distribution is exclusively restricted to Quebec. This range is restricted even further to the St. Lawrence River and some of its tributaries.This layer represents the Copper Redhorse critical habitat defined by the analysis of available knowledge and a scientific advice.PurposeThe Copper Redhorse population is in decline due to several threats like habitat degradation, construction of dams, contaminants, exotic or introduced species, recreational activities, commercial fishery, and low water levels. Furthermore, certain biological characteristics of the Copper Redhorse contribute to its vulnerability. The Copper Redhorse population was officialy listed as endangered in Schedule I of the Species at Risk Act in December 2007.Additional InformationCritical habitat for the Copper Redhorse has been identified to the extent possible, based on the best available information. Two workshops held in 2009 and 2010 by Fisheries and Oceans Canada and the Ministère des Ressources Naturelles et de la Faune du Québec, allowed to review the information and take note of the new data to identify habitat use by the Copper Redhorse in the St. Lawrence and Richelieu rivers and later in the Rivière des Prairies and Rivière des Milles Îles. Adult feeding habitat in the St. Lawrence River between Lake Saint-Louis and Lake Saint-Pierre, was identified using modeling based on the telemetric monitoring of habitat use and on twelve habitat variables (for example: depth, current velocity, vegetation density). Also, recent telemetry and historic data confirmed the use of the lower stretches of the Rivière des Prairies and Rivière des Mille Îles. Critical adult feeding habitat is consequently identified as habitat in the fluvial reach between Montreal and Sorel presenting favorable characteristics for the copper redhorse, used in the model.DFO. 2012. Recovery Strategy for the Copper Redhorse (Moxostoma hubbsi) in Canada. Species at Risk Act Recovery Strategy Series. Fisheries and Oceans Canada, Ottawa. xi+60 pp.https://www.registrelep-sararegistry.gc.ca/document/doc1565p/ind_e.cfm

The Steller sea lion (Eumetopias jubatus) is the largest of all sea lions and enjoys a lifespan of up to thirty years. In Canada, the Steller can be spotted along the rocky coast of British Columbia. These highly mobile marine mammals typically travel alone or in small groups, but they congregate in large numbers at traditional rookeries and haul-outs during the mating and pupping season. The population was severely depleted in Canada but following its protection in 1970, the size of the adult population has more than doubled.The survey targeted Steller sea lions and sites were chosen based on knowledge of historically occupied rookeries and haul-out sites with nearby areas monitored for potential shifts in distribution. This dataset contains counts that have been collected from sightings of individuals in the 2016/2017 survey season.

The National Ecological Framework for Canada's "Surficial Geology by Ecozone” dataset contains tables that provide surficial geology information with the ecozone framework polygons. It provides codes that characterize surficial geology (unconsolidated geologic materials) and their English and French-language descriptions as well as information about the area and percentage of the polygon that the material occupies.

This dataset is produced and published annually by Natural Resources Canada. It contains a variety of statistics on Canada’s mineral production, and provides the geographic locations of significant metallic, nonmetallic and coal mines, oil sands mines, selected metallurgical works and gas fields for the provinces and territories of Canada.Related product:- **[Top 100 Exploration Projects](https://open.canada.ca/data/en/dataset/b64179f3-ea0f-4abb-9cc5-85432fc958a0)**