This feature class identifies active areas designated for personal use woodcutting where harvesting dead or downed fuelwood can occur for purposes such as home heating. Certain areas have seasonal restrictions or additional terms and conditions. A forest resources permit is required to cut in these areas; this free permit authorizes a limit of 25m 3 (11 cords) of firewood. Failure to have a permit or carry it with you when cutting could result in enforcement action.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This is a spatial layer showing Ministry of Forests Free Use Permits. These are permits issued by the Ministry that authorize the permittee to cut and use Crown timber without charge. The permit is confined to a small area and for short durations of time.

The Non-Permit Area dataset is comprised of all the polygons that represent Non-Permit Areas in Alberta. The Non-Permit Areas are delineated areas where burning permits are not required by clients.

A spatial representation for non-road special use permits

This is a spatial layer that reflects operational activities for harvesting authorities. The harvesting authority is a legal area cleared by the Ministry of Forests and Range (that is, no other claims for the land exist) for harvesting purposes. This corresponds to the outlined areas on the Exhibit A maps. The Forest Tenures Section (FTS) is responsible for the creation and maintenance of digital Forest Atlas files for the province of British Columbia encompassing Forest and Range Act Tenures. It also supports the forest resources programs delivered by the MoFR. Each feature contains a Ministry of Forests and Range (MoFR) FEATURE_CLASS_SKEY (number) column that further defines the type of that feature. The layer contains harvesting authority boundaries for the following feature classes: Christmas Tree Permit (489), Forest Licence Cutting Permit (556), Licence to Cut (615), Timber Licence Cutting Permit (811), Timber Sale Licence Major Cutting Permit (818), Timber Sale Licence Minor (819), Tree Farm Licence Cutting Permit (834), WoodLot Licence Cutting Permit (864), Timber Sale Licence Minor Cutting Permit (917), and Community Forest Cutting Permit (2401). Each harvesting authority has a life cycle status code that is either PENDING - the harvesting authority has been submitted as a new harvesting authority or an amendment, but is not yet approved or rejected, ACTIVE - the harvesting authority is approved and activities may be taking place on the harvesting authority, or RETIRED - all activities have been completed for the harvesting authority

The Head Tax Permit Zone is comprised of three polygons for determining which zone a head tax permit falls in. These zones are used to apply the rental rate that forest grazing reserve permits, head tax permits (HTP), and provincial grazing reserves (GRR) are charged (Ministerial Order 01/2020).

Land under administration and control of Government of Yukon and disposed of by the Department of Energy, Mines and Resources (EMR), Land Management Branch in the form of active licences of occupation. A licence grants permission to do something which without the licence would not be allowable. Land Management Branch licences typically permit the construction and maintenance of power, telephone, water or sewer utilities on Commissioner's land. Licences of occupation are linear in nature and often extend long distances, hence the requirement for a separate feature class.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This polygonal dataset represents authorized applications for a Mines Act permit known as a Permitted Mine Area (PMA). This dataset can be used in combination with the NoW point dataset which represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. **The regional mine PMA dataset is not complete for all mine sites in BC. Review the data quality section for more information** Point representation of NoW: https://catalogue.data.gov.bc.ca/dataset/fab53209-63be-4c61-8de4-3e3fceec4227 Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. **Regional mines include:** * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized   **For the public view, please be aware that the ministry:** * Removed the attribute value of closed permits in the PERMIT_STATUS_CODE_DESC (PMT_STD) field. These records will show as permit status is NULL (empty). * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)

Volumes of water taken daily and annually under a Permit-to-Take-Water, as reported to the ministry under the Water Taking and Transfer Regulation 387/04. The Ontario Water Resources Act (Act) requires anyone who takes more than 50,000 litres of water in a day to obtain a Permit to take Water (PTTW) with some exceptions. Under the Act, the Water Taking and Transfer Regulation requires all holders of a PTTW to report the volume of water taken at each permitted source for each day of water taking. The data includes information from the permit on the purpose of the water taking, water source types and locations, as well as the daily and annual volume of water taken from each source.

This point dataset represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. Regional mines include: * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   **NOTE:** Administrative amendments to a NoW are not captured in this dataset. We are currently working to include this addition for a more complete view of the data. For proponents, please log into https://minespace.gov.bc.ca/ to confirm any authorizations on your permits. The ministry is transitioning from point data to polygonal data for permits and authorizations. The polygon dataset is added to when data becomes available. Users should use both the point dataset and the polygon dataset in combination. Polygon representation of permits with authorizations are referred to as Notice of Work (NoW) – Permitted Mine Areas – Regional Mine - Public https://catalogue.data.gov.bc.ca/dataset/c728435d-410e-42f9-81d5-95978c90e44a The downloaded product from the BCGW is a complete set of all the NoW public records. In addition to the records that contain lat/long references to be mapped spatially, this includes records that do not have NoW lat/long or mine lat/long coordinates to spatialize. These records are listed in a CSV file (HSP_NOTICE_OF_WORK_PA_POINT_SV_NullGeom). Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized * Client Delayed – Client needs to provide additional information or reclamation security * Government Action Required – Government needs to action; this status is triggered once a client has provided the requested information and client delay is no longer valid * Referred – Includes referral to agencies and stakeholders, and consultation with First Nations * Rejected – An application is rejected. Either the application standards are not met or requested documentation or security was not provided * Received – The NoW application has been sent from virtual FrontCounterBC to the ministry database * No Permit Required – Category when an inspector reviews the application and non-mechanized disturbance does not require a permit, for example an IP survey * Referral Complete – Referral and consultation is complete. The government needs to action the next steps * Withdrawn – Client requested the application to be withdrawn * Pending verification – Category for records needing review and verification. Typically, these are historical NoW applications with approvals. Manual review is required * NULL value – missing status and application type   **For the public view, please be aware that the ministry:** * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)