The theme on physicochemical monitoring of rivers and rivers presents data from all stations in networks monitoring water quality in rivers in Quebec and the St. Lawrence River.The purpose of networks for monitoring general water quality is to characterize, using current physicochemical and bacteriological parameters, the quality of water in spatial terms and to monitor the evolution of this quality over time. For the regular monitoring of the general quality of river and river water, the parameters measured are: total phosphorus, total nitrogen, nitrites and nitrates, ammonia nitrogen, chlorophyll a, pheopigments, faecal coliforms, faecal coliforms, turbidity, suspended matter, pH, conductivity, dissolved organic carbon and temperature. This data is used to calculate the Bacteriological and Physicochemical Water Quality Index (IQBP), a water quality classification index.The data set on physicochemical monitoring of rivers and rivers also includes the drainage areas of some of the stations. The attribute table provides a compilation of land use by category for the last year available at the time the data was generated. Follow-up is carried out annually.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Table containing information relevant to animal disease investigations in Manitoba from 2012 to present.This table contains information relevant to animal disease investigations in Manitoba from 2012 to present, conducted by the Chief Veterinary Office (CVO). Information includes year, number of sites, number of linked sites, animal species, disease types and results. Updated on a weekly basis.  It is important that users are aware of the following caveats when reviewing data presented in the Animal Disease Investigations Dashboard: 1. Each investigation can have one or more cases involved depending on the number of herds or animals exposed.  Not all disease investigations are handled the same due to a partnership approach.  Diseases can be detected via surveillance, ad hoc reporting, or through other programs. 2. Rabies is a separate program. Please see Manitoba's Provincial Rabies Management Program for data related to Rabies Surveillance.3. Certain zoonotic diseases, such as salmonella or influenza, are also captured in more detail through other means.  The total occurrence of a zoonotic disease represented in this dashboard reflects occurrences where risks or exposures were deemed significant enough to warrant further investigation.  4. Historically, One Health Investigations that were predominantly focused on Public Health issues rather than Animal Health concerns were not captured in this system and will be underrepresented here. Fields included ( Alias (Field Name): Field description.) Year (Year): Year of the disease investigation Number of Sites (Number_of_Sites): Number of investigation sites Number of Linked Sites (Number_of_Linked_Sites): Number of sites linked to investigation sites Species/Class (Species__Class): Group of animal species Disease Type (Disease_Type): The type of disease that is being investigated Result (Result): The outcome (positive/negative) for the corresponding animal disease investigation

CanVec contains more than 60 topographic features classes organized into 8 themes: Transport Features, Administrative Features, Hydro Features, Land Features, Manmade Features, Elevation Features, Resource Management Features and Toponymic Features.This multiscale product originates from the best available geospatial data sources covering Canadian territory. It offers quality topographic information in vector format complying with international geomatics standards.CanVec can be used in Web Map Services (WMS) and geographic information systems (GIS) applications and used to produce thematic maps. Because of its many attributes, CanVec allows for extensive spatial analysis.Related Products (Open Maps Links):**[Constructions and Land Use in Canada - CanVec Series - Manmade Features](https://open.canada.ca/data/en/dataset/fd4369a4-21fe-4070-914a-067474da0fd6)****[Lakes, Rivers and Glaciers in Canada - CanVec Series - Hydrographic Features](https://open.canada.ca/data/en/dataset/9d96e8c9-22fe-4ad2-b5e8-94a6991b744b)****[Administrative Boundaries in Canada - CanVec Series - Administrative Features](https://open.canada.ca/data/en/dataset/306e5004-534b-4110-9feb-58e3a5c3fd97)****[Mines, Energy and Communication Networks in Canada - CanVec Series - Resources Management Features](https://open.canada.ca/data/en/dataset/92dbea79-f644-4a62-b25e-8eb993ca0264)****[Wooded Areas, Saturated Soils and Landscape in Canada - CanVec Series - Land Features](https://open.canada.ca/data/en/dataset/80aa8ec6-4947-48de-bc9c-7d09d48b4cad)****[Transport Networks in Canada - CanVec Series - Transport Features](https://open.canada.ca/data/en/dataset/2dac78ba-8543-48a6-8f07-faeef56f9895)****[Elevation in Canada - CanVec Series - Elevation Features](https://open.canada.ca/data/en/dataset/64aad38d-f692-4ab6-bf2c-f938586c1249)****[Map Labels - CanVec Series - Toponymic Features](https://open.canada.ca/data/en/dataset/b3fdcd34-4533-415f-8f83-68f17f9d5d68)**

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, sediment trap data and particle capture of carbon, nitrogen, and silicon.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations in the North Pacific.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon. Also included are sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon as well as sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the North Pacific, the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Quarter Section with Road Allowance layer contains polygons that represent the location of Quarter Sections and adjacent Road Allowance Segment polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary.

This data shows the spatial extent of surface disturbance mapping projects completed by GIS contractors on behalf of Environment Yukon. Within these polygons, features were digitized using high resolution satellite imagery and orthophotos; outside these polygons, disturbance mapping is either incomplete or non-existent.Distributed from [GeoYukon](https://yukon.ca/en/statistics-and-data/mapping/explore-map-data-using-geoyukon) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital [map](https://yukon.ca/en/maps) data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Township Index polygon layer contains polygons that represent the location of Township polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary. No road allowance segments are included in this layer.

Compiled by Alberta Data Partnerships Ltd. (ADP), on behalf of the Government of Alberta, the ATS v4.1 Polygons - Section with Road Allowance layer contains polygons that represent the location of Sections and adjacent Road Allowance Segment polygons, derived from the Master Alberta Township System points file published as ATS Version 4.1, dated March 31, 2005, and clipped to an updated Alberta Data Partnerships Ltd. (ADP) created version of the Alberta provincial boundary.