The spatial representation of a Forest Stewardship Plan and Forest Development Units. A Forest Stewardship Plan is a plan submitted by a forest industry licensee stating how the BC Government's objectives for managing the province's forest resources will be met. It identifies the plan-holder's obligations for a five-year period. The Forest Development Unit is the spatially-mapped area of land within a Forest Stewardship Plan where specific forest practices obligations apply to specific forest licensees.

Landscape Management Units for the 2019 Peel Watershed Regional Land Use Plan. For more information, please refer to [https://yukon.ca/peel-watershed-regional-land-use-plan](https://yukon.ca/peel-watershed-regional-land-use-plan)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The purpose of this feature class is to identify those areas that are in the process of Timber Harvest Planning, process being a continuum from proposed plan through to approval and eventually plan expiration. Subsection 20(3) of the Forest Resources Act establishes that an approved Timber Harvest Plan is required prior to the authorization of timber harvesting under a Harvesting Licence or authorization of a Forest Resources Permit for non-commercial timber harvesting in an amount greater than 25m3 per year. A Timber Harvest Plan:• Must be developed in accordance with Sections 5 through 7 of the Forest Resources Regulation. • Identifies forest resources in the area and areas suitable for timber harvesting and establishes objectives for timber harvesting.• Must be consistent with any Forest Resources Management Plan that applies to the same area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The purpose of this layer is to provide end users with a spatial representation of the Designated Areas in adopted Development Plans and their consolidated amendments in Manitoba. It also allows users of the data to undertake a variety of land use planning analyses based on Development Plan Designations. This layer is intended to be a source of data delivery as well as usage in situ.This dataset is comprised of boundary geometry representing the Development Plan Designations for all of the Development Plan bylaws (as defined in The Planning Act) in force and effect within the Province of Manitoba. Spatial referencing of the designations is based on the best available land parcel data for each municipality. Where available, land parcel data based on registered survey plans and ground control coordinates was used. Otherwise, the reference grid maintained by Manitoba Sustainable Development was used. The delineation of the boundaries is set by the bylaw establishing or amending the boundary of each designation. Dataset content is subject to: Ongoing changes in designated areas which are determined by amendments to adopted Development Plans or the adoption of new Development Plans. Ongoing development and maintenance of the land parcel datasets. Improvements to the land parcel data are used to improve the positional accuracy of the Development Plan designation polygons. As of the publication date of this dataset, the following known issues remain: For designation boundaries that include water boundaries, the water boundary that best reflects the intended designation boundary was used. In some instances, road allowances on a municipal boundary are included in both of the adjoining municipalities. Please visit the Manitoba Municipal Relations website for more information at www.gov.mb.ca/mr. The Development Plan Designations data reflects the most current designations at the time of export and was uploaded to Manitoba Maps as a feature layer. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated DP_BYLAW: Number assigned by planning authority to identify a specific bylaw DPA_BYLAW: Number assigned to a bylaw that amends an existing development plan bylaw PLANNINGDISTRICT: Name of the Planning District establishing the bylaws PLANNINGREGION: Area of responsibility for a Community and Regional Planning Branch (In the Department of Municipal Relations) office ACRES: Area of each polygon expressed in acres DES_NAME: Name of Designation as stated in the Development Plan bylaw DES_CATEGORY: Designation category as interpreted by Municipal Relations RES_MIN_ACRES_PER_LOT: Minimum acreage for a residential lot as defined by the Development Plan bylaw RES_MAX_ACRES_PER_LOT: Maximum acreage for a residential lot as defined by the Development Plan bylaw MUNI_NO: Manitoba municipality identifier number MUNI_NAME: Name of municipality AU_LIMIT: Animal Unit limit as set by the Development Plan Policy

Off Road Vehicle (ORV) Trail Plan show the trails (whether individually or by zone) within the off-road vehicle management area or the part of the off-road vehicle management area for which a trail plan is developed, on which an off-road vehicle may be used. A red, yellow, green scheme is used to symbolize the level of restriction on the trail plan. Red: off road vehicles are prohibited; Yellow: off road vehicles are prohibited except where designated by an approved Off Road Management Area Trail Plan; Green: off road vehicles are not prohibitedDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@gov.yk. ca](mailto:geomatics.help@yukon.ca)

The purpose of this feature class is to identify the individual annual allowable cut and annual limit areas as referred to in the Forest Resources Act subsection 20(2) and 31(10 of the Forest Resources Regulation). Where there is no approved Forest Resources Management Plan (FRMP) for an area, forest resources harvesting can only be authorized in an amount less than that prescribed by regulation for that area. The Forest Resources Regulation subsection 31(1) establishes the annual limits for harvesting timber resources for areas without an FRMP. These areas are referred to as the Annual Limit Regions in Schedule 1 of the Regulation titled Timber Harvesting Areas. These annual limits are set as the annual allowable cut for each of the areas, until such time as a Forest Resources Management Plan is approved for that area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

North Yukon Planning Region Land Management UnitsDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset shows the boundaries of systems of natural heritage features and areas, lands and waters that support connectivity and have significant ecological value. It includes areas defined in provincial plans such as the: * [Greenbelt Plan](https://www.ontario.ca/document/greenbelt-plan-2017) * [Oak Ridges Moraine Conservation Plan](https://www.ontario.ca/page/oak-ridges-moraine-conservation-plan-2017) * [Niagara Escarpment Plan](https://www.escarpment.org/LandPlanning/NEP) * [Growth Plan for the Greater Golden Horseshoe](https://www.ontario.ca/document/place-grow-growth-plan-greater-golden-horseshoe)  This dataset does not include modifications to systems made by municipal governments as part of their official plans.

The purpose of this feature class is to identify the forest resources management zones within a Forest Resources Management Plan, as per subsection 2(h) of the Forest Resources Regulation. These sub-divided smaller forest planning areas or landscape units are based on watershed boundaries and modified by local access and development patterns. They usually contain similar management concerns and forest types. The units form the boundaries for detailed information gathering, monitoring and planning.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Minor urban center is one of the 7 Niagara Escarpment Plan land use designations. This designation includes rural settlements, villages and hamlets. The boundaries of minor urban centres are defined by the municipality in an approved official plan and/or secondary plan. [More information](http://www.escarpment.org)