PLC - Cadastral and land planning (planningCadastre)Land use. For example, resources describing zoning maps, cadastral surveys, and land ownership.

Area Based Management Plans (ABMP) are designated areas for the purposes of environmental protection. It must consider the impact of point and non-point source of waste, cumulative impact of the wastes, environmental management objectives and outcomes for the designated area, and ongoing monitoring and reporting.

Environmental Monitoring Stations (EMS) spatial points coverage for the Province by LOCATION TYPES. The following spatial layers reference this as a data source: 1. Environmental Monitoring - All Stations 2. Environmental Monitoring Stations - Air Monitoring (Ambient Air Site) 3. Environmental Monitoring Stations - Air Monitoring (Air Permit) 4. Environmental Monitoring Stations - Water Sites (Water Monitoring) 5. Environmental Monitoring Stations - Water Sites (Water Permits) 6. Environmental Monitoring Stations - Water Sites (Well) 7. Environmental Monitoring Stations - Water Sites (Observation Well) 8. Environmental Monitoring Stations - Water Sites (Spring)

The purpose of this feature class is to identify the forest resources management zones within a Forest Resources Management Plan, as per subsection 2(h) of the Forest Resources Regulation. These sub-divided smaller forest planning areas or landscape units are based on watershed boundaries and modified by local access and development patterns. They usually contain similar management concerns and forest types. The units form the boundaries for detailed information gathering, monitoring and planning.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This 'Current' spatial data layer is publicly accessible, contains the most current Non-Legal Old Growth Management Area (OGMA) polygons and excludes any sensitive information. This data represents spatially defined areas of old growth forest that are identified during landscape unit planning or an operational planning process. Forest licensees are not required to follow direction provided by non-legal OGMAs when preparing FSPs, and may choose to manage required old growth biodiversity targets in other ways. OGMAs, in combination with other areas where forestry development is prevented or constrained, are used to achieve biodiversity targets. Please see the Additional Information and Object Description Comments below.

This 'Current' spatial data layer is publicly viewable and downloadable, contains the most current Legal Old Growth Management Area (OGMA) polygons and excludes any sensitive information. This data represents legally established and spatially defined areas of old growth forest that are identified during landscape unit planning or an operational planning process. Forest licensees are required to maintain legally established OGMAs when preparing FSPs. OGMAs, in combination with other areas where forestry development is prevented or constrained, are used to achieve biodiversity targets. This spatial view will show the most current polygons and excludes sensitive information. This data is viewable in iMapBC by 2 layers: Legal Old Growth Management Areas - Current, Old Growth Management Areas - Legal. Please see the Additional Information and Object Description Comments below.

Biogeoclimatic Ecosystem Classification (BEC) zone boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by BEC zone provides a zonal ecosystem context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata

The purpose of this feature class is to identify those areas that are in the process of Timber Harvest Planning, process being a continuum from proposed plan through to approval and eventually plan expiration. Subsection 20(3) of the Forest Resources Act establishes that an approved Timber Harvest Plan is required prior to the authorization of timber harvesting under a Harvesting Licence or authorization of a Forest Resources Permit for non-commercial timber harvesting in an amount greater than 25m3 per year. A Timber Harvest Plan:• Must be developed in accordance with Sections 5 through 7 of the Forest Resources Regulation. • Identifies forest resources in the area and areas suitable for timber harvesting and establishes objectives for timber harvesting.• Must be consistent with any Forest Resources Management Plan that applies to the same area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Planning for an Environmental Response (PIER) initiative falls under the umbrella of the Government of Canada’s Oceans Protection Plan (OPP), whose goal is preserving marine ecosystems vulnerable to increased transportation and the development of the marine industry. The PIERs’ main mandate is to acquire and update biological sensitivity data under its jurisdiction for preparation and response purposes in the event of an oil spill.This dataset contains all observations of marine organisms noted during the analysis of 2959 underwater images sampled over a large extent of the coastal zone (≤10 m) of the Estuary and the Gulf of St. Lawrence (Quebec region). The dataset includes 21 490 occurrences of 150 taxa and informal categories including macroalgae, invertebrates and fish. Underwater images were collected between 2017 and 2021 according to a directed sampling protocol whose primary goal was to map large seaweed and eelgrass beds. Images were normally recorded as videos using a GoPro Hero camera installed on a pole and placed near the seabed from a small boat. The collected data served primarily as ground-truth data to validate coasting zone mapping based on aerial photographs within the framework of the PIER's initiative.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic event information, including date and location. The "taxon_occurrence" file includes the original identifiers of the observed organisms (verbatimIdentification field), identification remarks and their taxonomy.Taxonomic names were verified on the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match has been put in the scientificNameID field in the occurrence file. Data quality control was performed using the R packages obistools and worrms. All sampling locations were plotted on a map to perform a visual check confirming that the latitude and longitude coordinates were within the described sampling area.A visual dictionary was developed as an identification aid and accompanies this dataset (unilingual french only, the English version will be published soon). More data, including a visibility index, estimated macroalgae and eelgrass cover, substrate type and dominant macroalgae and animals were recorded but not included in this dataset. These data may be made available upon request.CreditsProvencher-Nolet, L., Paquette, L., Pitre, L.D., Grégoire, B. and Desjardins, C. 2024. Cartographie des macrophytes estuariens et marins du Québec. Rapp. Tech. Can. Sci. halieut. Aquat. 3617 : v + 99 p.Grégoire, B., Pitre, L.D., Provencher-Nolet, L., Paquette, L. and Desjardins, C. 2024. Distribution d’organismes marins de la zone côtière peu profonde du Québec recensés par imagerie sous-marine de 2017 à 2021. Rapp. tech. can. sci. halieut. aquat. 3616 : v + 78 p.

This dataset is a combination of landscape unit, biogeoclimatic zone/subzone/variants and Cariboo Chilcotin Land Use Plan (CCLUP) leading group type (PineGroup or FirGroup) used to roll up seral stage assessments in the Cariboo Natural Resource Region. Refer to the **Cariboo Regional Biodiversity Conservation Strategy Update Note #2: Amalgamation of Small NDT-BEC Units in Relation to Assessment of Seral Objectives and Old Growth Management Area Planning** and **Cariboo Regional Biodiversity Conservation Strategy Update Note #3: Definition of the Fir Group and Pine Group for Purposes of Seral Stage Assessments within NDT 4 of the Cariboo-Chilcotin** (see below under "Related Links") for more information on how seral stage assessment amalgamation units are derived.