Background:More than 80% of the heat produced in the Earth's crust comes from granitoid rocks. When granitoid rocks form they naturally concentrate radioactive elements such as U, Th, and K, and the radiogenic decay of these elements is an exothermic reaction. The radioactive decay of these elements within a granitoid body may generate local heat anomalies and elevated geothermal gradient at relatively shallow crustal levels. In combination with other local rock properties (e.g, porosity, permeability, thermal conductivity), radiogenic heat has the potential to generate a geothermal resource. The decay of radioactive elements converts mass into radiation energy, which in turn gets converted to heat. While all naturally radioactive isotopes generate some heat, significant heat generation only occurs from the decay of 238 U ,235 U ,232 Th and 40 K. Therefore, potential heat production is governed by the concentrations of U ,Th and K in the rock. In igneous rocks, radiogenic heat production is dependent on the bulk chemistry of the rock and decreases from acidic (e.g. granite) through basic to ultra basic rock types. Therefore, granites with anomalously high concentrations of U ,Th and K are targets for calculating potential radiogenic heat production. Potential radiogenic heat production (A)from plutonic rocks can be calculated using this equation:A (\\u03BCW/m 3 )=10 -5 \\u1D29 (9.52c u +2.56c K +3.48c Th )where "c" is the concentration of radioactive elements "U" and "Th" in ppm, and "K" in %; and "\\u1D29" is the rock density. Heat production constants of the natural radio-elements U, Th, K are 9.525x10 -5 , 2.561x10 -5 and 3.477x10 -9 W/kg, respectively.Data and Methods:Geochemical data from \~1760 samples of plutonic rocks from Yukon are used to calculate potential heat production. The calculated values for radiogenic heat production (A) are plotted over the mapped distribution of Paleozoic and younger plutonic rocks and major crustal faults are also shown for reference.

The bedrock geologic units designate units of the same types of rock which composed the solid rock exposed at ground surface (as outcrop) or which underlies unconsolidated surficial sediments. This dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of rock (lithology) in the hydrogeological unit, from a controlled vocabulary. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

The lithogeochemical data provides the chemical composition of rock samples. This data helps characterize the rocks and can be used to understand their mode of formation.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The map displays bedrock formations at or near the surface of the land, on the sea floor above the continental crust that forms the Canadian landmass, and oceanic crust surrounding the landmass. The bedrock units are grouped and coloured according to geological age and composition. The colours of offshore units and oceanic crust are paler and more generalized than those on land, although the constituent units offshore are still easily discernible from their dashed boundaries. This colour design, coupled with the use of a white buffer zone at the coast allows the coastline of Canada to be readily distinguished and still show the grand geological architecture of the Canadian landmass.The map also shows major faults that have disrupted the Earth's crust, onshore and offshore, and a variety of special geological features such as kimberlite pipes, which locally contain diamonds, impact structures suspected to have been caused by meteorites, and extinct and active spreading centres in the surrounding oceans.

This layer contains polygon features that represent geological units in New Brunswick. The associated Bedrock Geology Relate Table contains details about each map unit, including: a brief legend description, Group name, Formation name, and rock age. This layer is the result of nearly 50 years of bedrock mapping and it continues to change as new interpretations are made and more data is collected through field work and analysis.

The Yukon Territory is underlain by a great variety of rock types ranging in age from Early Proterozoic to Recent and representing diverse environments including epicratonic basins, subsiding shelves, foreland basins, island arcs and deep ocean basins. Episodes of compressional and extensional deformation, transcurrent faulting, metamorphism and plutonism further complicate the map pattern. This complex geological record has been described in terms of the interactions of several terranes (large parts of the earth's crust which preserve a common geological record) with each other and with the margin of ancestral North America.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

Areas of non-productive forest land in the Cariboo Region. Includes icefields, alpine areas, rock, gravel pits, sand, clay, non-productive brush, etc. From FC1 circa 2002

Location of rock samples collected during Precambrian mapping projects more recent than 1985 in northern Saskatchewan and stored at the Subsurface Laboratory.Location of rock samples collected during Precambrian mapping projects more recent than 1985 in northern Saskatchewan and stored at the Subsurface Laboratory. This is an on-going compilation so not all map projects are present. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

The National Ecological Framework for Canada's "Surface Material by Ecoregion” dataset provides surface material information within the ecoregion framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage