Waterbody types include: * Lake * River * Canal * Reservoir * Kettle lake * Pond * Beaver Pond * Ocean This product requires the use of geographic information system (GIS) software.

Stormwater ponds are artificial structures that are critical components of stormwater management systems in many Canadian cities. They serve to prevent flooding of urban areas during excess rainfall. Stormwater ponds also contribute to environmental health by allowing the settlement of dirt and solids from stormwater to the bottom of the pond. As a result, the sediments of stormwater ponds can become enriched with potentially harmful contaminants. The health risks posed to anglers by contact with stormwater and sediments and consumption of fish from stormwater ponds are not well characterized. The City of Lacombe (Alberta) is a municipality with two stormwater ponds stocked with sterile fish for angling. Alberta Health collected water, sediment and fish from these two ponds over two seasons (fall 2010 and spring 2011) and analyzed the samples for a suite of contaminants. Water samples were collected from three sites at each pond and three depths for each site (n=40; nine samples plus one replicate sample per pond per season). Sediment samples were collected from the same three sites at each pond (n=12; three samples per pond per season). Fish samples (rainbow trout) were collected in fall 2010 (n=18; eight from East Pond and ten from Len Thompson Pond). For the contaminant analysis, all samples (water, sediment and fish) were tested for parent and alkylated polycyclic aromatic hydrocarbons (PAHs). Additionally, water samples were tested for routine chemicals, trace metals, pesticides and volatile organic compounds (VOCs), and fish muscle tissue was tested for total mercury.

The Air and Watershed Resource Management Contacts and Boundaries dataset is comprised of all the polygons that represent the Air and Watershed Stewardship districts and the manager to contact with questions or concerns about environmental framework implementation and management response. This dataset was created to lend support to the Regulatory Assurance Division.

A compendium of reports that provide information about aquatic and terrestrial animals and plants, soils, surface water, groundwater and their accompanying data files and maps

This dataset uses RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images to identify open water regions within ice-covered rivers during winter, with the aim to assess hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation. The data is processed with the HyRASS, a machine learning-based SAR image processing and classification algorithm.Disclaimer:This dataset was designed to identify open water regions within ice-covered rivers for assessing hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation and is subject to the following limitations: • This dataset was derived from RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images. While these images are generally reliable, they are subject to inherent limitations, including resolution constraints, potential distortion, and occasional inaccuracies in real-time conditions capture. • The HyRASS algorithm is designed to pinpoint open water areas using satellite images, with a particular emphasis on RCM quad polarization (QP) imagery. This specialization means that its effectiveness depends on the accessibility of this specific type of imagery. Consequently, the data it produces might not cover a broad spectrum of time periods. For more reliable results, it's essential to classify areas more regularly, ensuring that detected open water regions are consistent over time.This dataset is intended for preliminary assessment and should not be the sole basis for making critical decisions or investments related to hydrokinetic energy projects. Further validation and in-depth analysis are strongly recommended, and users should conduct their own due diligence and additional research to verify the data accuracy and relevance for specific applications. By accessing and using this dataset, users acknowledge and accept these disclaimers. The providers of this dataset explicitly absolve themselves of any responsibility or liability for any consequences arising from the use, reliance upon, or interpretation of this dataset. Users are advised that their use of the dataset is at their own risk, and they assume full responsibility for any actions or decisions made based on the information contained therein. This disclaimer is in accordance with applicable laws and regulations, and by accessing or utilizing the dataset, users agree to release the providers of this dataset from any legal claims, damages, or liabilities that may arise from such use.

The Ontario Hydro Network (OHN) is a provincial medium scale originating from data with regional scales of 1: 10,000 in Southern Ontario, 1: 20,000 in Northern Ontario and 1: 50,000 in the Far North. The shoreline is taken from the OHN - Waterbody data class. This data is used for cartographic purposes and web mapping services. This product requires the use of geographic information system (GIS) software. [Ontario Hydro Network (OHN) User Guide (Word)](https://www.sdc.gov.on.ca/sites/MNRF-PublicDocs/EN/CMID/OHN%20-%20UserGuide.docx)

The Waterbodies dataset is comprised of area features: lakes, intermittent waterbodies, islands, and rivers wide enough to be represented as an area feature (e.g. St. Lawrence River, Mackenzie River). In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some area features have been subdivided and several types of virtual linear features serve to separate them. Features in this dataset are linked (by an attribute) to their corresponding flow line in the Drainage Network Skeleton. Therefore the Waterbodies dataset may be used in conjunction with the Drainage Network Skeleton for analytical applications. The Islands dataset is comprised of area and linear features: islands within inland waters and the waterbodies and single line rivers within these islands. Oceanic islands are not included as they are part of the coastline component of the Drainage Network Skeleton dataset. The Islands dataset exists to complete the cartographic representation of Canadian hydrology. The Islands dataset is not logically connected with the Drainage Network Skeleton, and can not be used for analytical applications. It should be noted that flow lines of the Drainage Network Skeleton do not take into account of the existence of islands and therefore do not necessarily flow around them. In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some islands themselves contain waterbodies and rivers, not significant for network analysis. However, in order to support a complete cartographic representation such waterbodies and rivers have been added to the Islands dataset. The National Scale Frameworks Hydrology data consists of area, linear and point geospatial and attribute data for Canada's hydrology at a national scale. It provides a representation of Canada's surface water features, and data completeness reflects the content of the source, the original Vector Map level 0 (VMAP0) revision 4 hydrographic layers, except where revision editing has been performed. Key value-added characteristics include river flow direction, connectivity and the tagging of geographical name keys to selected rivers, lakes and islands included in the Concise Gazetteer of Canada.The Atlas Frameworks are a set of integrated base map layers which form part of a larger National Scale Frameworks data collection. These data have been compiled at a scale of 1:1 000 000 with the primary goal being to indicate correct relative positioning with other framework layers rather than absolute positional accuracy.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Okanagan Lake kokanee shore spawner data set is comprised of multiple combined data sets. The historical data sets for the years 1974, 77, 78, 79 and 80 and more recent data sets collected from 2001 to 2016, and 2018. The historical data was derived from information collected in the field and hand drawn onto air photographs. Ministry staff circled Okanagan Lake in a boat one time each year and recorded fish numbers and spawner locations onto air photographs that were digitized in 2006 to make up the historical data set. This data set may not capture the peak reach count for these years. The data collected from 2001 to 2018 was derived from boat counts undertaken along the shoreline of Okanagan, Wood and Kalamalka Lakes. A GPS was used to record shore spawner locations and numbers. Multiple counts were undertaken over the entire spawning cycle and covered the peak spawning period for each year of data provided. The data collected for Christina Lake began in 2003 and ended in 2006. Christina Lake kokanee spawn at night in late December and early January. Kokanee spawning redd locations are available for the 2003/2004 count. Kokanee enumerations were undertaken at night for the 2004/2005 and 2005/2006 seasons and spawning redds were counted at the end of spawning cycle. For these two years there is both spawning and redd count data available.

Distribution of dabbling duck species habitat in coastal British Columbia showing relative abundance (RA) by season and overall relative importance (RI). RI is based on project region and not on the province as a whole. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

Assessment Watersheds are mesoscale aquatic units designed to replace the 3rd order 1:50K watersheds. Assessment Watersheds are based on groupings of fundamental watersheds using FWA watershed code and local code, with a target size of between 2,000ha and 10,000ha.