Location of public schools (French-speaking, English-speaking and special status) as well as private and governmental schools for preschool, primary, secondary, vocational training and adult education.In addition, the location of educational institutions in the college and university networks is also available.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Watershed polygons are a graphical representation of watershed boundaries as defined in the Clean Water Act - Watershed Protected Area Designation Order. Attributes include municipality, primary and secondary treatment, Map ID and Watershed name.

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1981 to 2010 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

Feature point layer showing locations of community kitchens available for rent in ManitobaThis feature point layer shows locations of community kitchens available for rent in Manitoba. Each kitchen has a Food Service Establishment permit issued by Manitoba Health, and is a suitable facility to produce value-added food products for sale. For more information, visit Manitoba Agriculture. This layer is used in the Manitoba Commercial Community Kitchens map and the Commercial Community Kitchens in Manitoba application. Fields included [Alias (Field Name): Field description] UID (UID): Unique identifier for the kitchen Operating (Operating): Indicates whether or not the kitchen is currently in operation Facility Name (Facility_Name): Name of the kitchen Region (Region): Economic region in which the kitchen is located Address (Address): Physical address of the kitchen City or Town (City_or_Town): City or town in which the kitchen is located Phone (Phone): Phone number for the kitchen Website (Website): Website link for the kitchen Equipment (Equipment): List of available equipment in the kitchen Contact (Contact): Contact person for the kitchen Contact Email (Contact_Email): Email address of contact person for the kitchen Contact Phone (Contact_Phone): Phone number of contact person for the kitchen Secondary Contact (Secondary_Contact): Secondary contact person for the kitchen Secondary Contact Email (Secondary_Contact_Email): Email address of secondary contact person for the kitchen Secondary Contact Phone (Secondary_Contact_Phone): Phone number of secondary contact person for the kitchen Latitude (Latitude): Latitudinal coordinates of the representative centre of the feature in decimal degrees Longitude (Longitude): Longitudinal coordinates of the representative centre of the feature in decimal degrees

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1993 to 2020 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

Feature point layer showing locations of community kitchens available for rent in ManitobaThis feature point layer shows locations of community kitchens available for rent in Manitoba. Each kitchen has a Food Service Establishment permit issued by Manitoba Health, and is a suitable facility to produce value-added food products for sale. For more information, visit Manitoba Agriculture. This layer is used in the Manitoba Commercial Community Kitchens map and the Commercial Community Kitchens in Manitoba application. Fields included [Alias (Field Name): Field description] UID (UID): Unique identifier for the kitchen Operating (Operating): Indicates whether or not the kitchen is currently in operation Facility Name (Facility_Name): Name of the kitchen Region (Region): Economic region in which the kitchen is located Address (Address): Physical address of the kitchen City or Town (City_or_Town): City or town in which the kitchen is located Phone (Phone): Phone number for the kitchen Website (Website): Website link for the kitchen Equipment (Equipment): List of available equipment in the kitchen Contact (Contact): Contact person for the kitchen Contact Email (Contact_Email): Email address of contact person for the kitchen Contact Phone (Contact_Phone): Phone number of contact person for the kitchen Secondary Contact (Secondary_Contact): Secondary contact person for the kitchen Secondary Contact Email (Secondary_Contact_Email): Email address of secondary contact person for the kitchen Secondary Contact Phone (Secondary_Contact_Phone): Phone number of secondary contact person for the kitchen Latitude (Latitude): Latitudinal coordinates of the representative centre of the feature in decimal degrees Longitude (Longitude): Longitudinal coordinates of the representative centre of the feature in decimal degrees

This dataset provides the location of Yukon's education facilities ranging from elementary to post-seondary education. The data also includes contact information and general programming information about each facility.Distributed from GeoYukon by the Government of Yukon. Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:%20geomatics.help@yukon.ca)

Minor urban center is one of the 7 Niagara Escarpment Plan land use designations. This designation includes rural settlements, villages and hamlets. The boundaries of minor urban centres are defined by the municipality in an approved official plan and/or secondary plan. [More information](http://www.escarpment.org)

This layer represents areas where primary production is considered to be high. Primary production includes microscopic algal blooms, named phytoplankton, a food resource at the base of the food web of marine ecosystems. The knowledge of these zones can serve as a proxy to identify areas of the St. Lawrence where productivity is higher at different times of the year. Impacting his component may influence the rest of the life cycle in the affected area. Data were generated from the Gulf of St. Lawrence Biogeochemical Model (GSBM) developed by Dr. Diane Lavoie. This model makes it possible to calculate, using 10 variables, the primary production in each cell of the grid of the model. This calculation was done at a monthly resolution and a threshold was then applied to the data to keep only those cells where the estimated concentrations exceeded 20 mg C / m-2. This level of primary production is considered high.Additional InformationMonthly mean primary production (mg C m-2) in the first 50 meters of the simulated surface with the three-dimensional CANOPA-GSBM numerical model over a period of 13 years (1998-2010).The Gulf of St. Lawrence Biogeochemical Model (GSBM) simulates biogeochemical cycles of oxygen, carbon and nitrogen, and the biological components that determine the dynamics of the planktonic ecosystem. The model has 10 state variables. The NPZD (nutrients, primary production, zooplankton, detritus) model includes both simplified herbivorous and microbial food chains typical of bloom and post-bloom conditions. The export of biogenic matter at depth is mediated by the herbivorous food web (nitrate, large phytoplankton (diatoms), mesozooplankton, particulate organic matter), while the microbial food web (ammonium, small phytoplankton, microzooplankton, dissolved organic matter) is mainly responsible for nutrient recycling in the euphotic zone. Nitrate is also supplied by rivers. The tight coupling between small phytoplankton growth and microzooplankton grazing, autochtonous nitrogen release and (dissolved organic nitrogen) DON remineralization to ammonium (NH4+) is used to represent the dynamic of the microbial food chain. Biological transfer functions are derived from bulk formulations using mean parameters found in the literature. Biological variables are calculated in nitrogen units and algal biomass and production converted to Chl a and carbon units using fixed stoichiometric ratios. Detrital particulate organic nitrogen (PON) gets fragmented to dissolved organic nitrogen (DON) as it sinks toward the bottom. The phytoplankton growth rate is a function of light and nutrient availability. The available light for phytoplankton growth is a function of sea-ice cover, Chl a and colored dissolved organic matter (CDOM). The GSBM biogeochemical model, coupled with the CANOPA regional circulation model, was used to produce the Chl a layer. The grid of the model is 1/12° horizontally (about 6 x 8 km), 46 layers vertical and covers the Gulf of St. Lawrence, Scotian Shelf and Gulf of Maine regions. The vertical resolution is variable (between 6 m close to the surface to 90 m at depths of about 500 m). This model includes tidal forcing and the freshwater supply of the St. Lawrence River and the many rivers in the region, as well as atmospheric forcing (temperature, wind, etc.) produced by an independent model (National Center for Environmental Prediction (NCEP) Climate Forecast System Version 2). In addition, the circulation model is coupled with a model of sea ice that reproduces the seasonality of the ice cover in the region. The temperature and salinity fields are produced freely by the model and only constrained by monthly climatologies of these conditions at the boundaries of the model domain. The simulation was carried out over a part of the period covering the Zonal Monitoring Program (AZMP) from 1998 to 2010.

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2015.attributes:ID - Unique identifierSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The product High Resolution Digital Elevation Model (MNEHR) is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**