Polygon features representing the geographical extent of a source area that contributes water to a drinking water system. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. Source Area is a broad term used to describe any area that could potentially contribute water to the drinking water system; it does not mean that hydrologic analyses have been completed to determine likelihood of connectivity. These source areas most often represent the entire aquifer extent (for ground water systems) or the watershed upstream from the intake (for surface water systems). This is one of three Drinking Water Sources datasets (along with the DWS - Intakes/Wellheads points dataset, and DWS - Protection Zones polygons dataset). Note: these polygons have unique Source Areas IDs used to relate them to the Intakes/Wellhead points.

A vector representation of stream networks is a crucial dataset for the modelling the surface water and groundwater components of the hydrologic cycle. For many usages a crucial attribute of the drainage network is a digital topology and hierarchal stream order attribute (e.g., Strahler stream order). In Canada jurisdictional stream networks are available for the provinces and territories and nationally for Canada in the National Hydrological Network (NHN) dataset. Unfortunately, the NHN data lacks the same topological and attribute information that is available for numerous provinces due to standardization for the entire country. For Canada1Water it was also necessary to have a harmonized dataset with the United States, for both the southern transboundary watersheds and the Alaskan watersheds. This report documents the processes completed to upgrade the topological and graph network support for NHN and provide continuous connectivity with US datasets. It also highlights and corrects a number of stream density and stream order issues that occur within Canada across provincial and territorial borders and NTS tiles. All vector processing was completed in RivEX software extension for ArcMap. Following complete topological correction stream classification was assigned and a table of the node graph network developed. Additional work was then completed to normalize stream density particularly amongst low-order streams between British Columbia and the Yukon and amongst local NTS tiles in Quebec and Ontario. Corrected NHN Strahler stream order assignment was validated against a number of provincial and watershed datasets, all of which already have Strahler stream order attributed. These datasets are the same underlying digitized vector data, so there are no differences in node or polyline positions. Strahler stream order assignment validation was only done by visual comparison as due to differences in vector segments a statistical comparison is complicated. The transboundary integrated C1W stream network with complete classification provides a seamless national dataset to support transdisciplinary studies (fisheries, wildlife, health, pesticide and nutrient issues, mining impact, ecosystem restoration, numeric modelling) that involve a knowledge of stream distribution and ranking.

Water temperature and water level are significant environmental factors affecting ecology of anadromous fish. Large-scale freshwater monitoring networks remain sparse, yet environmental protocols rely heavily on water temperature and water levels to assist decision making on river closures. Our river monitoring project in Newfoundland and Labrador provides river water temperature and river water level for salmon rivers across the province. 72 temperature loggers are deployed across 24 river systems in Newfoundland and Labrador. Temperature loggers are deployed in approximately 30 cm of water and remain in river year-round. Loggers consist of Onset level loggers, tidbit loggers, and pendants or Innovasea minilogs. Some loggers are deployed in duplicate at locations to provide data redundancy in event of equipment loss or failure. Equipment is monitored throughout the season to ensure proper placement in water columns, with downloads taking place during monitoring trips.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

This point feature layer contains both general and detailed information on waterbodies in Manitoba which are associated with the Lake Information for Anglers program.The point data contained within this layer represent the centroids of waterbodies in Manitoba. The layer describes a number of different attributes about a waterbody including, where available: average depth, aquatic invasive species information, regulatory links, presence of contours, waterbody specific PDF, fish assessment information, species information and coordinates. The waterbody data layer, along with related information, can be found at the Manitoba Lake Information For Anglers app. The project was initiated by Manitoba Wildlife and Fisheries Branch with funding from the Fish and Wildlife Enhancement Fund. Data is provided by Manitoba Wildlife and Fisheries Branch, Swan Valley Sport Fishing and Manitoba Watershed Districts. For additional information visit Manitoba Fisheries. The dataset includes the following fields (Alias (Name): Description) Waterbody ID (WATERBODY_ID): Unique identifier for an individual waterbody. Waterbody Name (WATERBODY_NAME): Name of the waterbody. Surface Area (km2) (SURFACE_AREA): Surface area of the waterbody in square kilometres. Average Depth (m) (AVERAGE_DEPTH_M): Average depth of a waterbody, if bathymetric data is available. Secchi (SECCHI): Indicates whether data exists for secchi depth in the waterbody (YES/NO). Secchi Depth (m) (SECCHI_DEPTH): Depth in meters of the visibility of a secchi disk. Fishing Division (FISHING_DIVISION): Indicates which fishing division the waterbody centroid is within. Fishing Division Special Area (SPECIAL_AREA): Indicates if the waterbody is within the special walleye areas (A or B). Please refer to the Angling Guide for details. UTM Zone (ZONE): Indicates which UTM zone the waterbody is in. Aquatic Invasive Species (AIS): Indicates the known or unknown presence of aquatic invasive species. Aquatic Invasive Species Control Zone (AIS_CONTROL_ZONE): Indicates which aquatic invasive species control zone a waterbody is within. High Quality Management (HIGH_QUALITY_MANAGEMENT): Indicates whether the waterbody falls under the high quality management angling regulations in Manitoba (TRUE/FALSE). HQM Description (HQM_DESCRIPTION): Indicates the high quality management provisions based on the fishing division the waterbody is in (only applies if the waterbody is a High Quality Management waterbody). Angling Regulations (SPECIAL_REGS): A note to see Manitoba Anglers’ Guide. Anglers' Guide (ANGLING_GUIDE): Contains a link (URL) to the Manitoba Anglers’ Guide. Waterbody Link (PRINTABLE_MAP): Contains a link to a PDF of waterbody contours and lake specific information for waterbodies that have bathymetric data. Boat Launch (BOAT_LAUNCH): Indicates whether the waterbody has a known boat launch (YES/NO). Launch Photo (LAUNCH_PHOTO): Indicates whether there is a launch photo for the waterbody (YES/NO). Boat Launch Photo (BOAT_LAUNCH_PHOTO): Contains a link (URL) that directs users to a photo of the launch. Stocked (STOCKED): Indicates whether the lake has been stocked with fish in the past (TRUE/FALSE). Species (SPECIES): A list of gamefish species that are known to have existed in the waterbody historically. Currently contains no info. Assessment (ASSESSMENT): Indicates whether an assessment PDF is available for the waterbody (YES/NO). Fisheries Assessment Link (FISHERIES_ASSESSMENT_LINK): Contains a link that directs users to a PDF document that contains information about species, fish age demographics, and master angler records. Contours (CONTOURS): Indicates whether contour data exists for the waterbody (YES/NO). Lat (DD) (LAT_DD): Latitudinal coordinates of the representative centroid of the waterbody in decimal degrees. Long (DD) (LONG_DD): Longitudinal coordinates of the representative centroid of the waterbody in decimal degrees.

Groundwater samples have been collected in the hydrogeological unit, for various types of analysis. The dataset is not used to represent a particular phenomenon or observation but rather as a utility dataset to add context and reference to groundwater analysis. It represents a general description of the sample site and sample. Sampling methods vary according to the types of analysis.

This dataset uses RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images to identify open water regions within ice-covered rivers during winter, with the aim to assess hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation. The data is processed with the HyRASS, a machine learning-based SAR image processing and classification algorithm.Disclaimer:This dataset was designed to identify open water regions within ice-covered rivers for assessing hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation and is subject to the following limitations: • This dataset was derived from RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images. While these images are generally reliable, they are subject to inherent limitations, including resolution constraints, potential distortion, and occasional inaccuracies in real-time conditions capture. • The HyRASS algorithm is designed to pinpoint open water areas using satellite images, with a particular emphasis on RCM quad polarization (QP) imagery. This specialization means that its effectiveness depends on the accessibility of this specific type of imagery. Consequently, the data it produces might not cover a broad spectrum of time periods. For more reliable results, it's essential to classify areas more regularly, ensuring that detected open water regions are consistent over time.This dataset is intended for preliminary assessment and should not be the sole basis for making critical decisions or investments related to hydrokinetic energy projects. Further validation and in-depth analysis are strongly recommended, and users should conduct their own due diligence and additional research to verify the data accuracy and relevance for specific applications. By accessing and using this dataset, users acknowledge and accept these disclaimers. The providers of this dataset explicitly absolve themselves of any responsibility or liability for any consequences arising from the use, reliance upon, or interpretation of this dataset. Users are advised that their use of the dataset is at their own risk, and they assume full responsibility for any actions or decisions made based on the information contained therein. This disclaimer is in accordance with applicable laws and regulations, and by accessing or utilizing the dataset, users agree to release the providers of this dataset from any legal claims, damages, or liabilities that may arise from such use.

Province-wide SDE spatial layer displaying consumptive water licence points of diversion for drinking water systems. In the context of this layer, Drinking Water Systems means two or more water licences for domestic purposes at a single POD; and/or a water licence(s) for any other purpose indicating a water diversion and distribution system supplying water directly to residences and/or buildings for human consumption. This layer is an instantiation of the spatial view WLS_BC_POD_DRINKING_SOURCES_SVW

Rivers of the city of Trois-Rivières**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This dataset contains information on fish stockings since 1917 in Manitoba waterbodies with details on date of stocking, amount of fish, size of fish and species of fish.Stocking Data is a point layer representing individual stocking events dating back to 1917. Each record contains information such as waterbody name, fish species, fish size and quantities, as well as the fishing division of the waterbody. Stocking data is updated multiple times per year as the Province of Manitoba Hatchery conducts stocking. The stocking data layer, along with related information, can be found at the Manitoba Lake Information For Anglers app. The project was initiated by Manitoba Wildlife and Fisheries Branch with funding from the Fish and Wildlife Enhancement Fund. Data is provided by Manitoba Wildlife and Fisheries Branch, Swan Valley Sport Fishing and Manitoba Watershed Districts. For additional information visit Manitoba Fisheries. The dataset includes the following fields (Alias (Name): Description) Waterbody ID (WATERBODY_ID): Unique identifier for an individual waterbody. Waterbody Name (WATERBODY_NAME): Name of the waterbody that was stocked. Fishing Division (FISHING_DIVISION): Indicates which fishing division the waterbody is located in and where stocking event took place. Year (YEAR): Year of the stocking event. Date (DATE): Date of the stocking event. Species (SPECIES): Species that was stocked. Size (SIZE): Size of the fish that were stocked. Quantity (QUANTITY): Approximate number of fish stocked. Lat (DD) (LAT_DD): Latitudinal coordinates of the stocking event (if recorded, otherwise the representative centroid of the waterbody) in decimal degrees. Long (DD) (LONG_DD): Longitudinal coordinates of the stocking event (if recorded, otherwise the representative centroid of the waterbody) in decimal degrees. Waterbody Lat (WATERBODY_LAT): Latitudinal coordinates of the representative centroid of the waterbody in decimal degrees. Waterbody Long (WATERBODY_LONG): Longitudinal coordinates of the representative centroid of the waterbody in decimal degrees.