These lines represent routes within Motor Vehicle Prohibition Regulation Areas where motor vehicles are prohibited or restricted year round or seasonally. These lines were created as a visual representation of the Wildlife Act Motor Vehicle Prohibition Regulations. Under the Motor Vehicle Prohibition Regulation of the provincial Wildlife Act, motor vehicle use on crown land in B.C. may be prohibited or restricted. This data is a summary of the Motor Vehicle Prohibition Regulations, and is intended for general information purposes only. Where there is a discrepancy between these maps and the Regulations, the Motor Vehicle Prohibition Regulations are the final authority. Motor Vehicle Prohibitions (MVP) are put in place for a variety of reasons. MVPs can be used to: * protect habitat * reduce disturbance and displacement of wildlife * provide areas for hunters on foot, bike or horseback to hunt without motorized vehicles present * reduce hunter harvest while maintaining hunting opportunity   Motor vehicles include but are not limited to: * vehicles * ATVs/UTVs * snowmobiles * motorcycles * electric bikes   For full definitions and detailed regulations, visit the Motor Vehicle Prohibition Regulations website (available under Related Links). There are 2 types of motor vehicle restrictions under the Wildlife Act, and all types can be seasonal or year-round. 1. **Motor Vehicle Closed Area** (formerly referred to as Access Management Areas (AMAs): Prohibits the use or operation of a motor vehicle and e-bike. These prohibitions can be for all motor vehicles, or specific to ATVs/e-bikes or snowmobiles. 2. **Motor Vehicle Hunting Closed Area**: The operation of motor vehicles and e-bikes to hunt, transport wildlife, transport equipment and supplies which are intended for or in support of hunting, or transport hunters to and from the location of wildlife is prohibited. These prohibitions can apply to all motor vehicles, or be specific to ATVs/e-bikes or snowmobiles.

The purpose of this dataset is to show the Near-Urban Centrefire Prohibition Area (NUCPA) in Manitoba.The Near-Urban Centrefire Prohibition Area (NUCPA) is a provincially-regulated prohibition of centrefire rifles for white-tailed deer hunting. This prohibition encompasses all or portions of the Rural Municipalities (RMs) of Headingley, Rosser, Rockwood, St. Andrews, West St. Paul, East St. Paul, St. Clements and Richot. Under the General Hunting Regulation (351/87) of The Wildlife Act (c. W130), no person shall have a rifle requiring a centrefire cartridge in his or her possession while hunting deer in lands identified as a Near Urban Wildlife Zone on Plan No. 20350 or 20525 filed in the office of the Director of Surveys.Fields included (Alias (Field Name): Field description)FID (FID): sequential unique whole numbers that are automatically generatedDescription (Description): definition and description of the Near-Urban Centrefire Prohibition AreaShape_Length (Shape_Length): length of the feature in internal unitsShape_Area (Shape_Area): area of the feature in internal units squared

These polygons represent areas across the Province where motor vehicles are prohibited or restricted year round or seasonally. These areas were created as a visual representation of the Wildlife Act Motor Vehicle Prohibition Regulations. Under the Motor Vehicle Prohibition Regulation of the provincial Wildlife Act, motor vehicle use on crown land in B.C. may be prohibited or restricted. This data is a summary of the Motor Vehicle Prohibition Regulations, and is intended for general information purposes only. Where there is a discrepancy between these maps and the Regulations, the Motor Vehicle Prohibition Regulations are the final authority. Motor Vehicle Prohibitions (MVP) are put in place for a variety of reasons. MVPs can be used to: * protect habitat * reduce disturbance and displacement of wildlife * provide areas for hunters on foot, bike or horseback to hunt without motorized vehicles present * reduce hunter harvest while maintaining hunting opportunity   Motor vehicles include but are not limited to: * vehicles * ATVs/UTVs * snowmobiles * motorcycles * electric bikes   For full definitions and detailed regulations, visit the Motor Vehicle Prohibition Regulations website (available under Related Links). There are 2 types of motor vehicle restrictions under the Wildlife Act, and all types can be seasonal or year-round. 1. **Motor Vehicle Closed Area** (formerly referred to as Access Management Areas (AMAs): Prohibits the use or operation of a motor vehicle and e-bike. These prohibitions can be for all motor vehicles, or specific to ATVs/e-bikes or snowmobiles. 2. **Motor Vehicle Hunting Closed Area**: The operation of motor vehicles and e-bikes to hunt, transport wildlife, transport equipment and supplies which are intended for or in support of hunting, or transport hunters to and from the location of wildlife is prohibited. These prohibitions can apply to all motor vehicles, or be specific to ATVs/e-bikes or snowmobiles.

The spatial representation for a Tree Farm Licence Deletion, which is forest land within the Tree Farm Licence that is being removed from the Tree Farm Licence Schedule 'A' or 'B' For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in Newfoundland and Labrador, Canada. These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations on the basis of sanitary and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications when in Open Status. The classification may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/7aef69b5-3aaf-4d50-bb86-083031e6dc47

The spatial representation for a Pulpwood Agreement, which is a 25 year term agreement, replaceable every ten years, that allows the holder of a wood-fibre processing facility to harvest Crown pulp timber if sufficient quantities of raw material are not available to the holder from other sources. Covers a large area in one or more Timber Supply Areas or TFLs.

This view reflects what is in the Tree Farm License Agreement. Once an agreement is signed additions and deletions and changes occur that are not reflected in this layer. If you would like to see the current boundary please use the FADM - Tree Farm License Current View (TFL). Further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3 The spatial representation for a Tree Farm License, which is an agreement entered into under Part 3, Division 5 of the Forest Act which grants the rights to harvest timber. A tree farm licence has a term of 25 years and requires a management plan providing for the establishment, management, and harvesting of timber in a described area (Crown and private land) on a sustained or perpetual yield basis

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in Prince Edward Island, Canada. These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations on the basis of sanitary and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications when in Open Status. The classification may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/7aef69b5-3aaf-4d50-bb86-083031e6dc47

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in New Brunswick, Canada. These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations on the basis of sanitary and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications when in Open Status. The classification may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/7aef69b5-3aaf-4d50-bb86-083031e6dc47

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The province of Quebec provided some combined sewer overflow data for 2020, which includes information on whether a discharge occurred at a combined sewer overflow point during the year. The map below shows the number of CSO points with at least one overflow event within each wastewater system. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater