Mining activities include information relating to mining operations (active mining), advanced mineral exploration projects (development and development), and exploration properties.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Compilation of magnetic density and susceptibility measurements carried out since summer 2018 as part of field laboratories associated with MRNF bedrock geological mapping projects.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Hydraulic properties characterize a hydrogeological unit. The hydraulic properties considered for this dataset are the transmissivity, the hydraulic conductivity, the storage coefficient, the specific storage coefficient and the porosity. Hydraulic properties are estimated by performing aquifer tests (pumping tests, slug tests). The hydraulic tests and their duration are managed in this dataset. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset exhibits a general description of hydraulic properties of the hydrogeological unit, including hydraulic test, total test duration, method and date. It includes numbers and/or ranges describing the aquifer tests results. Note that an alternate raster representation could be used in complement to the discrete point-based representation.

The Indigenous Mining Agreements dataset provides information on the Indigenous communities signatory to agreements, the types of agreements negotiated, exploration projects and producing mines.

* This dataset is updated on a daily basis. The ‘Record Modified’ date refers to the last metadata update.This dataset contains the extent of mineral claims held in Nunavut. A mineral claim is an area of Crown Land that is selected using the Nunavut Map Selection system by an individual or mineral exploration company that holds a valid licence to prospect. This grants the individual or mineral exploration company the mineral rights to the recorded area as provided for under the Nunavut Mining Regulations, SOR/2014-69. If the holder of a mineral claim wishes to produce minerals from the claim, or to hold it for more than thirty years, the holder must apply for a lease of the claim. This digital coverage provides a record and tracking mechanism for mining exploration in Nunavut.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100036000/1547749889500. Note: This is one of the four (4) datasets that describe mineral tenure in Nunavut. It includes mineral claims, mining leases, prospecting permits as well as coal exploration licences.

This dataset provides information related to the top-spending off-mine-site exploration and deposit appraisal projects in Canada for the given reference year. The dataset is maintained by the Lands and Minerals Sector, Natural Resources Canada, and forms the basis for the annual Map of Top 100 Exploration and Deposit Appraisal Projects in Canada.Related product:- **[Principal Mineral Areas, Producing Mines, and Oil and Gas Fields (900A)](https://open.canada.ca/data/en/dataset/000183ed-8864-42f0-ae43-c4313a860720)**

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

The BORHOLES layer represents the compilation of available data from various boreholes throughout the Yukon and near the Yukon border. This data set includes oil and gas exploration wells, mineral exploration boreholes, water supply wells and environmental monitoring well. The data points include information on the borehole location, purpose, status, depth, temperature data, water flow and chemistry data where available along with references where further detailed information may be available.

The SiIGsol-100m maps make it possible to document the spatial evolution of the properties of the mineral part of the soil at a spatial resolution of 100 m. These values were simulated by combining point observation data and spatially explicit covariates, derived from remote sensing data, using automated learning methods. These values should not be interpreted as an observation, but rather as the most likely value for a given distribution of observations and set of predictor variables. Soil property values are simulated for all non-urbanized land surfaces. All attributes whose value is likely to change withthe depth are available in 6 layers, which make it possible to translate the evolution of properties with depth. The depth limits used come from the GlobalSoilMap.net project mapping standard: 00-05 cm, 05-15 cm, 15-30 cm, 30-60 cm, 60-100 cm, and 100-200 cm. Map products are currently divided into 6 variables; the sand fraction, the silt fraction, the clay fraction, the pH, the cation exchange capacity and the proportion of organic matter. They cover the entire territory of the Province of Québecois located south of the 55th parallel.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

* This dataset is updated on a daily basis. The ‘Record Modified’ date refers to the last metadata update.This dataset contains polygon areas that represent the locations of coal exploration licences granted in Nunavut..For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100036000/1547749889500.Note: This is one of the four (4) datasets that describe mineral tenure in Nunavut. It includes mineral claims, mining leases, prospecting permits as well as coal exploration licences.